Loading ...
Loading ...
Loading ...
14_Setting Up
5. Position the Top Table(
2
) in place.
With a Philips head screwdriver, insert and tighten the 3
screws into the Top Table. With the door opened, reinsert
the Top Table cap(
) and close the doors.
When reattaching the top table, make sure that the
wires are not pressed or damaged by the top table.
2
4. Connect the water line (
5
) and then insert a
clip on the coupler with pulling tube.
Connect the one connector(
4
) on left side
door and two connectors (
3
) at each side
of the top cap.
3
4
Red Clip
(1/4”)
The clip is enveloped inside of the top cap.
Dispenser
Door Tube
Cabinet
Tube
5
3
The water line (
5
) must be fully inserted to the marked line to prevent
water leakage from the dispenser.
Be sure to sensor (yellow cable) is inside the top table.
CAUTION
Setting up your French Door Refrigerator
Loading ...
Loading ...
Loading ...