Loading ...
Loading ...
Loading ...
14
The coee froth is too light (de-
livered from the spout too fast)
The pre-ground coee is not pressed
down rmly enough
Press the pre-ground coee more rmly
There is not enough pre-ground coee Increase the quantity of pre-ground coee
The pre-ground coee is too coarse Use only pre-ground coee for espresso coee
makers
The wrong type of pre-ground coee is
being used
Change the type of pre-ground coee
The coee froth is too dark
(delivered from the spout too
slowly)
The pre-ground coee is pressed down
too rmly
Press the coee down less rmly
There is too much pre-ground coee Reduce the quantity of pre-ground coee
The espresso boiler outlet is blocked Clean as described in the section “Cleaning the
boiler outlet”
The lter is blocked Clean as described in the section “Cleaning the
lter”
The pre-ground coee is too ne Use only pre-ground coee for espresso coee
makers
The pre-ground coee is too ne or
damp
Use pre-ground coee for espresso coee makers
only and make sure it is not too damp
Limescale in the water circuit Descale as described in the section “Descaling”
After delivering coee, the lter
remains attached to the boiler
outlet
Insert the lter holder again, deliver coee, then
remove the lter holder
The appliance will not make
any drink and the
,
and
lights ash for a few
seconds
No water in the tank Fill the tank with water
The tank has been inserted incorrectly
and the valves on the bottom are not
open
Press the tank down lightly to open the valves on
the bottom
The espresso boiler outlet is blocked Clean as described in the section “Cleaning the
boiler outlet”
The lter is blocked Clean as described in the section “Cleaning the
lter”
Limescale in the water circuit Descale as described in the section “Descaling”
The appliance does not fun-
ction and all the lights ash
With an extreme use, the appliance reaches a high
temperature. Simply wait: the appliance will cool
down automatically
The appliance does not fun-
ction and all the lights ash for
a long time
Abnormal machine conditions Disconnect the appliance and contact authorised
Customer Services.