Loading ...
Loading ...
Loading ...
12
Descaling
Descale the appliance when the orange light on the
button comes on.
Important!
Descaler contains acids which may irritate the skin and
eyes. It is vital to respect the manufacturer’s safety
warnings given on the descaler pack and the warnings
relating to the procedure to follow in the event of contact
with the skin and eyes.
You should use De’Longhi descaler only. Using unsuitable
descaler and/or performing descaling incorrectly may
result in faults not covered by the manufacturer’s
guarantee.
Proceed as follows:
1.
Completely empty the water tank and REMOVE THE
SOFTENER FILTER (if present).
2. Fill the tank with the descaler solution obtained by diluting
the descaler with water following the instructions on the
pack.
3. Press the ON/OFF button.
4. Make sure the lter holder is not attached and position a
recipient under the cappuccino maker.
5. Wait for the
and lights to come on steadily,
indicating that the appliance is ready for use.
6. Press and hold the
button for 10 seconds until the
three buttons ash in sequence.
7. Turn the steam dial to the
position.
8. Press the
button to start descaling.
9. The descale programme starts and the descaler liquid
comes out of the water spout.
The descale programme removes limescale deposits from
inside the appliance by automatically performing a series
of rinses and pauses until the tank is completely empty.
Please note:
During descaling, to clean the boiler outlet, close the steam dial
from time to time to deliver small quantities of descaler from
the boiler outlet.
10. The appliance stops operation and the orange
light continues to ash, indicating that descaling is still
underway.
11. The coee maker is now ready for rinsing through with
clean water.
Extract the water tank, empty, rinse under running water,
ll with fresh water up to the MAX level, reinsert the
softner lter (if previously removed) and put back in the
appliance.
12. Empty the container used to collect the descaler solution
and replace it empty under the hot water spout.
13. Make sure the steam dial is in the
, position, then
press the
button to start rinsing.
Please note:
During rinsing, to clean the boiler outlet, close the steam dial
from time to time to deliver small quantities of water from the
boiler outlet.
14. Extract the water tank and ll with fresh water up to the
MAX level, then repeat once steps 12 to 14.
15. Make sure the steam dial is in the closed position
(symbol).
The appliance is ready for use.
Repair of damage to the coee maker caused by scale is not
covered by the guarantee unless descaling is performed
regularly as described above.
Loading ...
Loading ...