Loading ...
Loading ...
Loading ...
7
SPECIFICATIONS/FUNCTIONS
Power: 6v, four AA (1.5V) Alkaline or Lithium batteries only. Low battery warnings at
4.25V and 3.75V
Programming Code (PC): The preset programming code is 123456. Please change it to a
new code for security. Programming code length is 4-10 digits.
Local Codes: Codes that are programed using the programming code at the lock. There
is a limit of 10 in memory and the code 1234 is programmed by default. Local code
lengths are 4-10 digits.
User Codes: Codes that are programed using the web portal and can be congured to
follow an access schedule. User code lengths are 4-10 digits.
Auto-Lock / Storehouse Mode: The lock will automatically relock itself after the speci-
ed delay following an unlock. Default delay is 5 seconds. Enabled by default on all lever
models.
Passage Mode: The lock will remain unlocked after a code is entered. Enabled by default
on all deadbolt models.
Audio Indications
1 beep indicates successful operation or button press
2 beeps indicates successful programming
3 beeps indicates operational or programming error
4 beeps indicates 4.25V low battery warning
8 beeps indicates 3.75V low battery warning
Illuminated Indications
1 green ash indicates successful operation or button press
2 green ashes indicates successful programming
3 red ashes indicates operational or programming error
4 red ashes indicates 4.25V low battery warning
8 red ashes indicates 3.75V low battery warning
Orange ashes indicates lock is in the middle of a programming sequence
Restore Factory Defaults
Preset factory settings can be restored by pressing and holding the “R” button on the
battery pack within 10 seconds of power cycling the lock (removing and reinserting a
single battery).
Deadbolt Door Handing
Directional instructions for the deadbolt to correctly set locked/unlocked positions.
Required programming during initial setup or after a factory reset for deadbolt models
only.
Unlocking the door
The lockset will become unlocked by key, by entering a user/local code followed by
LockState on the keypad, or by interior turn knob.
Locking the door
The lockset will become locked by key, by pressing the LockState button twice, or by
interior turn knob.
Loading ...
Loading ...