Loading ...
Loading ...
Loading ...
5
8. INSTALL BATTERIES
9. CHANGE LEVER HANDING
Insert 4 AA Alkaline or Lithium batteries
and put the battery cover back on the
receiver module.
Do not use rechargeable (NiCD, NiHM,
LiPo, etc.) batteries or batteries with a
voltage rating of under/over 1.5v * Please
Note: Deadbolt model will not function
until door handing is programmed on the
lock (pg.8)
Be sure the levers are unlocked.
Insert the provided pin wrench
into the small hole on the neck
of lever and apply pressure to
depress the catch and pull out
the lever from the stem.
Follow the same steps to remove
interior lever and exchange the
position of inside and outside
levers.
A
Remove the cylinder from lever and insert it into opposite lever.
Then install the levers and make sure the small hole on the neck of lever aligns over
the catch perfectly. Rotate the levers to see if it operates well.
B
BATTERY
COVER
Loading ...
Loading ...
Loading ...