Loading ...
Loading ...
Loading ...
46
EN
Symptoms Reason Solution
Fabric softener overflow
Too much softener may cause
an overflow.
• Follow softener guidelines to
ensure appropriate amount
is used. Do not exceed the
maximum fill line.
Softeners dispensed too early
Too much softener may cause
an premature dispensing.
• Follow the guidelines provided
by the detergent manufacturer.
• Close the dispenser drawer
slowly. Do not open the drawer
during the wash cycle.
The buttons may not function
properly.
The button cannot be
recognized when the door is
open.
• Press again after closing the
door.
Dry problem Check water supply tap.
• Do not overload. Check
that the washing machine is
draining properly to extract
adequate water from the load.
Clothes load is too small to
tumble properly. Add a few
towels.
• Turn off water supply tap.
Odor
This odor is caused by
the rubber attached to the
washing machine.
• It is the normal odor of new
rubber and will disappear after
the machine has been run a
few times.
If the rubber door gasket
and door seal area are not
cleaned regularly, odors can
occur from mold or foreign
substances.
• Be sure to clean the gasket
and door seal regularly and
check under the door seal for
small items when unloading
the washer.
Odors can occur if foreign
substances are left in the
drainage pump filter.
• Be sure to clean the drainage
pump filter regularly.
Odors can occur if the
drainage hose is not properly
installed, causing siphoning
(water flowing back inside the
washing machine).
• When installing the drainage
hose, be sure that it doesn’t
become kinked or blocked.
Using the dry function, odors
can occur from lint and other
laundry matter sticking to the
heater. (Dryer model only)
• This is not a malfunction.
A particular odor can occur
from drying wet clothes with
hot air. (Dryer model only)
• The odor will disappear after a
short while.
Loading ...
Loading ...
Loading ...