Loading ...
Loading ...
Loading ...
5
FIRST STEPS
2. Push the shelf grommet onto the wire
until it snaps in place.
3. Slide the shelf grommet into the
grommet already in the unit wall until it
is ush.
1. Place the basket on a rm, at surface.
2. With the narrow side of the handle clip
on the inside of the basket, snap the
handle clip to the recessed area in
the basket.
To install the handle clips to the basket:
3. Once the inside surface snaps in place,
continue the process by rolling the
handle clip slightly outward and pressing
down rmly to snap onto the outside
surface. If installed incorrectly, the
handle clip will not lay at.
Door Removal
If door must be removed, unplug the unit.
1. Gently lay appliance on its back, on a
rug
or blanket.
2. Remove 2 base screws and base panel.
3. Remove wire from clips on bottom of
cabinet if required.
4. Unplug connector, if required, by holding
the cabinet connector in place, and
pulling door connector out.
5. Remove bottom hinge screws.
6. Remove plastic top hinge cover.
7. Remove screws from top hinge.
8. Remove top hinge from cabinet.
9. Remove door and bottom hinge
from cabinet.
10. To replace door, reverse the above
order and securely tighten all screws to
prevent hinge slippage.
Base Screw
Hinge
Screws
Wire
Door
Connector
Cabinet
Connector
Harness
Restraint
Loading ...
Loading ...
Loading ...