Loading ...
Loading ...
Loading ...
4
Ventilation system Instructions
Your Over-the-Range microwave oven is designed for adaptation to the following three types of ventilation.
Select the type of ventilation required for your installation and proceed to the appropriate section.
A. Horizontal Ventilation System
A-1. Ventilation motor
This blower motor has a damper and your microwave oven is shipped assembled for a Recirculation Application.
Step 1.
* Remove the screws (1) and (2) for opening the blower motor
cover and save screws. Remove cover.
Step 3.
Turn the blower unit so that the fan blade openings are facing
back ( rear of unit ).
CAUTION: Wires to blower unit must be routed properly to
avoid pinching wires before reinstallation of cover plate.
Step 2.
* Remove the screws (3) for Blower attachment and save screws.
* Lift blower unit out of mounting location.
CAUTION:
Do not pull or stretch blower wiring.
Blower motor
Before : Fan blade openings facing Front
1
2
Blower motor cover
Back of OVEN
Use side cutters or tin snips to cut and remove parts B from
back plate. be careful not to distort the plate.
Parts B
Turn the blower motor clockwise 180˚
After : Fan blade openings facing Rear
KOT1G8T_KOT1G9T_설치(영).indd 4 2019-09-18 오후 3:16:02
Loading ...
Loading ...
Loading ...