Loading ...
Loading ...
Loading ...
uuOperating the Switches Around the Steering WheeluDriving Position Memory System
*
128
Controls
1. Turn the ignition switch to ON (w
*1
. Adjust
the driver’s seat and the door mirrors to the
desired position.
2. Press the SET button.
uYou will hear a beep, and the memory
button indicator light will blink.
3. Press and hold memory button
(1 or (2
within five seconds of pressing the SET
button.
uOnce the seat and the door mirrors
position has been memorized, the
indicator light on the button you pressed
stays on.
1. Move the shift lever to
(P.
2. Apply the parking brake.
3. Press a memory button ((1 or (2).
uYou will hear a beep, and the indicator
light will blink.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
■
Storing a Position in Memory
1Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
• You do not press the memory button within five
seconds.
• You readjust the seat position before the double-
beep.
• You readjust the door mirrors.
• You turn the ignition switch to any position except
ON
(w
*1
.
Memory
Button 1
Memory
Button 2
SET Button
■
Recalling the Stored Position
1Recalling the Stored Position
The seat and the door mirrors automatically move to
the memorized position. When they finish moving,
the beeper sounds, and the indicator light stays on.
The seat and the door mirrors stop moving if you:
• Press the SET button, or a memory button ((1 or
(2).
• Adjust the seat position.
• Adjust the door mirrors.
• Shift into any position except (P.
Memory
Button 1
Memory
Button 2
13 CROSSTOUR-31TP66300.book 128 ページ ２０１２年９月２７日 木曜日 午後３時２７分
Loading ...
Loading ...
Loading ...