Loading ...
Loading ...
Loading ...
167
uuOperating the Switches Around the Steering WheeluAuto High-Beam
*
Controls
Disable or re-enable the system when the
vehicle is parked and the ignition switch is in
ON (w
*1
and the light switch is in the AUTO
position.
Disabling the system: Pull the light switch
lever towards you and hold it for at least 40
seconds. The auto high-beam indicator in the
meter will blink twice.
Re-enabling the system: Pull the light
switch lever towards you and hold it for at
least 30 seconds. The auto high-beam
indicator in the meter will blink once.
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition
switch.
■
Disabling or Re-enabling the System
1Disabling or Re-enabling the System
The auto high-beam is in the previously selected
disabled or re-enabled setting each time you start the
engine.
AUTO Position
U.S. models
Canadian models
AUTO Position
19 FIT JAZZ-31T5A6400.book 167 ページ ２０１８年２月２６日 月曜日 午後４時３０分
Loading ...
Loading ...
Loading ...