Loading ...
Loading ...
Loading ...
EN 20
Residual heat indicator
After use, the cooking zone used may stay hot for several minutes.
As long as the cooking zone is still hot, an ‘H’ will be visible in the
display.
Boost
You can use the ‘boost’ function to cook at the highest power level
during a short period of time (max 10 minutes). After the maximum
boost time has passed, the power will be reduced to setting 12.
Switching on ‘boost’
1. Put a pan on a cooking zone and switch on the cooking zone.
2. Tap twice at the end of the slide control with your finger to set the
‘boost’ setting.
‘12’ and ‘boost’ appear in the display.
Switching off ‘boost’
‘Boost’ has been switched on, the display shows setting 12 and ‘boost’.
1. Tap anywhere on the slider with your finger.
In the display you will see a lower setting.
Or:
2. Press the on/off button of the cooking zone you want to switch off.
You will hear a single audio signal and the display dims.
The cooking zone has been switched off completely.
Two cooking zones behind each other
• The two cooking zones which are behind each other affect each
other. When both of these cooking zones are switched on at the
same time, the power is shared between them automatically. The
first set cooking zone will remain at the set setting at all times.
The maximum set setting for the cooking zone to the front or back
that is added later depends on the setting of the first cooking
zone. When you have reached the maximum amount of cooking
setting combinations, the last set setting will start to flash and is
automatically lowered to the highest possible setting.
• Two cooking zones next to each other will not influence each other.
You can set both cooking zones on a high setting.
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH
INDUCTION OPERATION
Loading ...
Loading ...
Loading ...