Loading ...
Loading ...
Loading ...
Emergencies
your vehicle is functioning properly. This is
not only in the interest of your own safet
y,
but also that of all other road users.
●
Before changing a bulb, make sure you
have the correct new bulb.
●
Do not touch the glass part of the bulb
with your bare hands, use a cloth or paper
towel instead, since the fingerprints left on
the glass will vaporise as a result of the
heat generated by the bulb, they will be
deposited on the reflector and will impair
its surface.
●
Depending on the level of equipment fit-
ted in the vehicle, LEDs may be used for
part or all of the interior and/or exterior
lighting. LEDs have an estimated life that
exceeds than that of the car. If an LED light
fails, go to an authorised workshop for its
replacement.
Main beam headlight bulb
Fig. 53
In the engine compartment: main
beam headlight bulb
.
–
Raise the bonnet.
–
Turn the cover
1
anti-clockwise and take it
out
›
›
›
Fig. 53
.
–
R
emove the bulb connector
2
by pulling it
outw
ar
ds.
–
R
emo
v
e the bulb by pulling it out and fit the
new one.
–
Fit the bulb connector
2
.
–
Fit cover
1
, turning it towards the right.
–
Check whether the new bulb is working.
Dipped beam headlight bulb
Fig. 54
In the engine compartment: remove
the co
v
er
.
Fig. 55 In the engine compartment: dipped
beam headlight bulb
.
–
Raise the bonnet.
–
Move the loop
›
›
›
Fig. 54
1
in the direction
of the arr
o
w and r
emo
v
e the cover.
–
Remove the bulb connector
›››
Fig. 55
2
.
58
Loading ...
Loading ...
Loading ...