Loading ...
Loading ...
Loading ...
Self-help
●
Avoid heavy acceleration, hard br
aking
and fast cornering.
●
Drive for only 10 minutes at a maximum
speed of 80 km/h (50 mph) and then check
the tyre.
For the sake of the environment
Dispose of used or expired sealant observ-
ing any l
egal requirements.
Note
A new bottle of sealant can be purchased
at SEAT dealerships.
Note
Take into account the separate instruction
manual of the tyre mobility set* manufac-
t
urer.
Anti-puncture kit contents*
Fig. 32
Standard representation: anti-punc-
t
ur
e kit cont
ents.
The anti-puncture kit is located underneath
the fl
oor co
v
ering in the luggage compart
-
ment. It includes the f
ollowing components
›››
Fig. 32:
Valve insert remover
A sticker to be adhered to the instrument
cluster, within the driver's visual field, to
remind that the maximum advisable
speed “max. 80 km/h” or “max. 50 mph”
Filler tube with cap
Air compressor
ON/OFF switch
Air bleed screw (it can also be integrated
in the inflator tube).
1
2
3
4
5
6
Warning provided by tyre pressure moni-
t
oring syst
em (it can al
so be int
egr
ated in
the inflator tube).
Tube for inflating tyres
12 volt connector
Bottle of sealant
Spare tyre valve
The valve insert remover
1
has a gap at
the l
o
w
er end f
or a v
alve insert. The valve in-
sert can only be screwed or unscrewed in this
way. This also applies to its replacement part
11
.
Sealing and inflating a tyre
Sealing the tyre
●
Unscrew the tyre valve cap and insert. Use
the
›
›
›
Fig. 32
1
tool to remove the insert.
Pl
ace it on a cl
ean surf
ace
.
●
Shak
e the tyre sealant bottle vigorously
›››
Fig. 32
10
.
●
Screw the inflator tube
›
›
›
Fig. 32
3
into
the seal
ant bottl
e
. The bottl
e's seal will br
eak
automatically.
●
Remove the lid from the filling tube
›››
Fig. 32
3
and screw the open end of the
t
ube int
o the t
yr
e v
alve.
●
With the bottle upside down, empty all of
the contents into the tyre.
»
7
8
9
10
11
39
Loading ...
Loading ...
Loading ...