3 4 5 6 72
9
11 12 13 1410
8
underneath the jawbone. Continue the line all the way up to the
ears and hairline.
4. Accentuate your beard line by using the trimmer in a downward
motion. Start at the line you’ve
created and, working from the chin
back toward the ears, trim the area
right under your beard line.
5. Define the upper part of your beard
using the same technique.
6. For a neater finished look, use
the close-trim/jawline blending
attachment which is also included
with your trimmer. To use the
attachment, simply insert one side of
the attachment over the front of the
blades, and then push the other side
back until both sides are locked into
position. Then, using the trimmer in
an upward motion, start trimming
under the chin with short, outward,
rolling strokes. Continue trimming
until entire jawline is blended.
To remove the attachment, pull tab
away from one side to release attachment from trimmer. Use
somewhat of a rolling pressure action, with your thumb on top
and index finger underneath.
TRIMMING YOUR MUSTACHE
(with Beard Regulator)
1. Comb your mustache.
2. Hold the trimmer in a vertical position
with the blades pointing toward you
in order to define the line of your
mustache.
6-Position Guide
makes achieving a consistent trim easy,
every time.
The guide can be removed (providing a
seventh cutting position) and reattached
without changing the preset cutting
length, so once you have found the
perfect length, there’s no guesswork in
achieving it every trim. The trimming
guide is a two-piece assembly,
consisting of a base and a comb. It
should not be disassembled. To attach
the guide, simply slide it on at a slight
angle and press the release tab down
to secure in position. To remove the
guide, gently push up on the release tab
and slide the assembly away from the
trimmer. Adjust the trimming length by
pressing on the thumb lever and moving
the comb forward or backward to the
desired setting.
GROWING A BEARD
There are three key factors that will determine which beard style is
best for you:
1. The shape and dimensions of your face.
2. The natural growth of your beard.
3. The thickness of your beard. If you are unsure about the type of
beard that would most suit your face, speak with a professional
hair stylist or go to:
www.wahltrimmers.com
TRIMMING AND EDGING
YOUR BEARD
The following are suggested trimming steps and trimmer
positions. You may find different procedures work better
for you.
1. Comb your beard in the direction that it grows to help reveal
stray hairs that may be longer than the others.
2. Attach the 6-position trimming guide to trim and taper your
beard. With the blades pointing toward you, begin with the
trimming guide attachment set at a long trimming length.
For best results, start at each sideburn
and stroke downward toward your
neck. Trim toward your chin in smooth,
overlapping strokes, following the
lay of your beard. If you trim against
the way your beard naturally lays, the
trimmer will cut the hair much shorter
and the result may be patchy.
Adjust the trimming guide to
progressively shorter settings
until you reach the desired length
of beard. You may wish to set the
trimming guide attachment to cut
closer near the ear and down under the chin, changing to a longer
setting toward the front of the face and point of your chin. When
the trimming guide is removed, it will remain at its last length
setting until you change it.
Always be sure the trimming guide is snapped solidly into the
desired position before you start to trim.
3. Remove the trimming guide and cut the outline of your beard.
Rotate the trimmer so that the blades are pointing toward
you. Starting under your chin and working back toward your
jawbone and ears, cut the outer perimeter of your beard
CARING FOR YOUR TRIMMER
OILING BLADES
For best results, put one or two drops of
Wahl Clipper Oil on
the blades only when necessary, or
approximately once a month. Motor
bearings are permanently lubricated—do
not attempt to oil.
When oiling your trimmer, turn the trimmer “ON - I,” hold the unit
with the blades facing DOWN and squeeze one or two drops of oil
onto the blades. Wipe off excess oil with soft cloth.
NOTICE—DO NOT OVER OIL!
Excessive oiling or application of liquids will cause damage if
allowed to seep back into motor.
BLADE CARE
Trimmer blades have precision-hardened, ground and lapped
cutting teeth. Blades should be handled carefully and never
bumped or used to cut dirty or abrasive material.
Should blades become damaged or dull, you may purchase a new
blade assembly from Wahl. Be sure to ask for the Groomsman XL
blade assembly.
CLEANING/STORAGE
Before storing your trimmer, use the cleaning brush to whisk
any loose hairs from the unit and the blades. Store unit in such a
manner so that blades are protected from damage.
When the trimmer is not in use, the trimmer guide/blade guard
attachment should be in place to protect the blades.
RECYCLE/REPLACEMENT
OF NI-CAD BATTERY
Do not mix old and new batteries. Do not mix alkaline, standard
(carbon-zinc), or rechargeable (Ni-Cad, Ni-MH, etc.) batteries.
Under normal use, the rechargeable nickel-cadmium batteries in
your trimmer may last up to five years. At the end of their life,
when they will no longer take a full charge, the nickel-cadmium
batteries must be removed and recycled or disposed of properly.
Do not attempt to replace the batteries. All servicing or battery
replacement should be performed by an Authorized WAHL Service
Location. To remove the battteries for recycling or disposal, follow
these steps:
1. Unplug transformer from outlet, disconnect cord from
trimmer and allow the batteries to completely run down before
disassembly.
2. Using a screwdriver, pry the back grip pad away from the
housing.
3. Turn trimmer over and repeat on the opposite side until the grip
pad is loose.
4. Remove the back grip pad.
5. Remove the two screws.
Operating Instructions for
Battery Trimmer
Rechargeable and
Rechargeable Cord/Cordless
Instrucciones de operación
de la recortadora recargable,
recargable con cordón/sin cordón,
o que opera pilas
IMPORTANT SAFEGUARDS
When using your electrical appliance, basic
precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS AND SAFEGUARDS
BEFORE USING THIS TRIMMER.
DANGER
To reduce the risk of death or injury by
electric shock:
1. Do not reach for an appliance that has fallen
into water. Unplug immediately from the
outlet.
2. Do not use while bathing or in a shower.
3. Do not place or store appliance where it can
fall or be pulled into a tub or sink. Do not
place in or drop into water or other liquid.
4. Except when charging, always unplug
this appliance from the electrical outlet
immediately after using.
5. Always unplug this appliance before cleaning.
6. (Rechargeable unit only.) Unplug the
charger before using trimmer.
recharge fully overnight.
7. If you have a rechargeable cord/cordless trimmer, it can be
used with the cord so you can trim even if the charge is low.
The charging indicator light will glow when your trimmer
is in the “OFF” position and connected to its charger.
The trimmer cannot be overcharged, so you may charge
it as often as desired. We recommend that the battery be
“worked” or discharged by trimming without the cord and by
not recharging after every use.
In certain areas that experience low line voltages, the red charging
indicator light on your trimmer may become dim as
the battery nears full charge. This dimming does not affect the
performance of your trimmer but is simply a result of variances in
power line voltages.
TROUBLESHOOTING
(rechargeable)
If your Trimmer does not seem to take a charge, check the following
before returning it for repair:
1. Check outlet current by plugging in another appliance.
2. Make sure the outlet simply is not connected to a light switch which
turns the power at the outlet off when lights are turned off.
3. Be sure the trimmer is properly connected to the recharging
transformer, all connections are secure and the switch on the
trimmer is turned “OFF - 0.”
4. If your electricity is connected to a master power switch, we
suggest the trimmer be disconnected from the charger anytime
the master switch is off. Leaving the unit plugged into a dead
outlet or an unplugged charger will drain the battery.
5. If trimmer does not run and it is completely charged, turn the unit
“ON - I” and pinch or push the blades manually. (Oil may have
dried out between the blades, so they may be temporarily stuck
together.)
8. Do not use this appliance with a damaged
or broken blade or trimming attachment, as
facial injury may occur.
9. Always attach plug to appliance first, then to
outlet.
10. Use only the charger supplied by the
manufacturer to recharge.
To disconnect, turn unit “OFF - 0,”
then remove plug from outlet.
SAVE THESE INSTRUCTIONS
For Household Use Only
RECHARGING
1. This trimmer is conveniently designed for household use. It
should be allowed to charge overnight before first use.
2. Remove the trimmer, recharging transformer and accessories
from the packing material.
3. Connect the transformer to the trimmer. BE SURE TRIMMER IS
IN THE “OFF - 0” POSITION WHEN CHARGING.
4. Plug the recharging transformer into any convenient electrical
outlet at the correct voltage.
5. When trimmer is not in use, it may be connected to the
transformer and plugged into an outlet to assure maximum
power is available when it is next used. This transformer
is designed to continuously charge the battery without
overcharging.
6. Ni-Cad battery life may be extended with the following
procedure: Once every month, let the trimmer run until the
motor stops. Move the switch to the “OFF - 0” position and
WARNING
To reduce the risk of burns, electrical shock or
injury to persons:
1. This power unit is intended to be correctly
orientated in a vertical or floor mount
position.
2. Close supervision is necessary when this
appliance is used by, on, or near children or
disabled persons.
3. Use this appliance only for its intended
use as described in this manual. Do not
use attachments not recommended by the
manufacturer.
4. Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly, if it has been dropped or damaged,
or if it has been dropped into water. Return
the appliance to Wahl Clipper Corporation for
examination and repair.
5. Keep the cord away from heated surfaces.
6. Insert only recharging transformer plug into
charger receptacle.
7. Do not use outdoors or operate where
aerosol (spray) products are being used or
where oxygen is being administered.
3. With the attachment set at a
fairly long trimming length, begin
trimming your mustache, starting
at the top and working down to
your upper lip. Use progressively
closer settings to get the look and
length you desire. You may also
use the close-trim/jawline blending
attachment for finish blending and
tapering your mustache.
4. For tapering the mustache, set
the 6-position trimming guide at
a medium length. Starting in the
middle of your mustache, follow the
lip line and taper with short upward
strokes of the trimmer, working out
toward the corners until a gentle
shape is created on the bottom of
your mustache.
5. As a finishing step, remove the trimming guide and, using only
the bare blades, make a definitive line at the bottom of your
mustache.
TRIMMING YOUR BEARD WITH ATTAcHMENTs
Your Trimmer includes three snap-on attachments, 1/8” and 3/16” and
a stubble guide. The attachments are ideal for trimming and defining
your beard, as well as for achieving a stubble look. The guides can be
used with or against the direction of hair growth depending on your
preference of closeness. For the stubble look, use the stubble guide
every other day. The specially designed rounded guide will give you
that few day growth look. Outline your stubble look like you would a
beard.
CONTAINS SEALED, RECHARGEABLE NICKEL-
CADMIUM BATTERY. MUST BE RECYCLED OR
DISPOSED OF PROPERLY.
The RBRC Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery
contained in this product indicates Wahl is voluntarily participating in an
industry program to collect and recycle these batteries at the end of their useful
life, when taken out of service in the United States or Canada. The RBRC
program provides a convenient alternative to placing used Ni-Cd batteries into
the trash or the municipal waste stream, which is illegal in some areas. Please
call 1-800-8-BATTERY for information on Ni-Cd battery recycling in your area.
Wahl’s involvement in this program is part of our commitment to preserving
our environment and conserving our natural resources.
Beard
TRIMMER
6. Pull the trimmer apart.
7. Cut the wires and remove the two batteries.
8. Apply tape to both ends of the batteries before recycling or
properly disposing.
LOADING / REPLACING
BATTERIES
(battery unit only)
1. Remove battery cover from front of trimmer by pushing
in and back on the plastic door in the direction of the
arrows.
2. Insert two AA batteries as indicated by molded outline in
trimmer.
3. Replace battery cover to its original position.
4. Move switch to “ON” position to use.
5. To maximize battery life, trimmer should be shut “OFF”
immediately after using.
TROUBLESHOOTING
(battery unit only)
If your trimmer fails to operate when switched “ON,” check
your batteries to see if they are properly installed. Positive
end (center post) should be located as shown in battery
housing. Make sure the switch is in the “ON” position and
check to be sure blades are free to move. If blades become
clogged with debris, manually pushing the blades back and
forth a few times while unit is turned “OFF” may help free the
blades and allow the trimmer to operate. If it still does not
operate, your batteries have probably exceeded their useful
life. To maximize battery life, replace both AA batteries at the
same time.
No. 1 Very Short (2 mm)
No. 2 Short (4 mm)
No. 3 Medium Short (6 mm)
No. 4 Medium (8 mm)
No. 5
Medium Long
(10 mm)
No. 6 Long (12 mm)
© 2013 Wahl Clipper Corporation
Part No. 93276-100
Printed in China
For more information or Product Registration, visit www.wahltrimmers.com
3-YEAR LIMITED WARRANTY
Valid in U.S.A. Only
If your Wahl product fails to operate satisfactorily within three
(3) years from the date of original purchase or receipt as a gift,
Wahl will, at our option, repair or replace it and return it to you
FREE OF CHARGE. Do not return this product to store where
purchased. Products needing repair under this warranty should
be returned with postage prepaid to:
Wahl Clipper Corp.
Attn: Repair Department
3001 Locust Street
Sterling, Illinois 61081
Include a note describing the defect and the date of original
purchase or receipt as a gift (if in warranty). Products out of
warranty will be repaired at our standard repair charges.
This warranty is void and no repair or replacement will be made
under this warranty or otherwise if: (1) The product is modified
in any manner or repaired by anyone other than Wahl Clipper
Corporation or Wahl authorized service center. (2) The product
has been used commercially or subjected to unreasonable use.
This warranty gives you specific legal rights and you may
also have other rights which may vary from state to state. No
other written express warranty is given. Any implied warranty,
including any warranty of merchantability which may arise from
purchase or use, is limited to the year period provided in this
express warranty. Some states may not allow such limitation,
so it may not apply to you. No responsibility is assumed for
incidental or consequential damages of any type, or for the use
of unauthorized attachments. Some states may not allow the
exclusion or limitation of incidental or consequential damages, so
the limitation or exclusion may not apply to you. Outside U.S.A.,
check with store for Wahl authorized distributor’s warranty.
SERVICE AND REPAIR
If you have problems with your trimmer, send it prepaid
with a note explaining the problem to:
Wahl Clipper Corporation
Attn: Repair Department
3001 Locust Street
Sterling, IL 61081
Telephone (800) 767-9245
For products purchased outside the United States, contact your distributor.
If for any reason within 60 days of purchase of your Wahl
®
trimmer you are not satisfied with your trimmer and would
like a refund, just return your trimmer, together with the sales
receipt, to the retailer from whom you purchased it. Wahl will
reimburse all retailers who accept trimmers within 60 days of
purchase. If you have any questions regarding this money-
back guarantee, please call 1-800-767-9245 in the United
States.
60 Day Money Back Guarantee!
3/16” 1/8” 1/16”
www.wahltrimmers.com
Loading ...
Loading ...
Loading ...
