Loading ...
Loading ...
Loading ...
10
Turbo Boil Burners
Setting the Bridge Burner
Setting Surface Burner Controls
1. Place cooking utensil on surface burner.
2. Push the surface control knob down and turn counterclockwise out of the
time. However, only the burner you are turning on will ignite.
4.
5. Once the burner is lit, continue to turn counterclockwise to the desired
DO NOT have
to be set at a particular setting. Use the
as needed.
DO NOT cook with the
electronic ignitor will continue to spark if
OFF
MED
LO
HI
LITE
T
u
r
n
C
o
u
n
t
e
r
c
l
o
c
k
w
i
s
e
OFF
LO
HI
LO
HI
LITE
bridge
bridge
Setting the Bridge Burner
The Bridge Burner should be used with
rectangular shaped cookware. Cookware like
best results with the Bridge Burner.
The Bridge Burner feature may be used to combine the cooking power of 2
or if needed 3 gas surface Burners located along the left-hand side of the
cooktop. The left rear and left center Burners are controlled by the left rear
Bridge Burner with the left front gas Control Knob.
Operating the Bridge Burner
1. Push the left rear surface control knob in and turn counterclockwise out
electronic surface ignitors will spark at the same time. However, only the
selected surface Burner will lite.
3. Visually check that the rear Burner has lit.
.
5. Visually check that both the rear and center Burners are lit.
6. When both Burners are lit, continue to turn the control knob
counterclockwise
together. Note: The markings between and settings
DO NOT cook with any of the surface control knobs in the
Note:
Note: The front Burner may be added as part of the Bridge Burner by setting
the left front gas Control Knob.
OFF
MED
HI
LITE
LO
Loading ...
Loading ...
Loading ...