Loading ...
Loading ...
Loading ...
10
11
6 sec
1 2 3
4 5 6
7 8 9
click click
10 11 12
13
click click
When your non-washable filter unit needs replacing the
appliance will display the pattern shown. To replace
the non-washable filter unit, follow these steps. If the
appliance has been in use, leave for 1 to 2 hours before
replacing the filter unit to allow the appliance to cool
down completely. Your Dyson appliance is programmed
to remind you to replace the filter unit after 12 months
based on 12 hours usage a day. Please note your
indicator will activate sooner with more use.
The indicator is only a guide and you may need
to replace the filter unit more regularly.
Replacing the filter unit
A clockwise-rotating loading pattern will
be shown on the LED display.
Once the loading pattern is complete,
the appliance will return to its normal
usage.
When you have re-assembled your appliance, press and hold the ‘Standby ON/OFF’
button for 6 seconds on the remote control to reset the filter indicator.
The Dyson Link app will notify you when your non-washable filter needs to be replaced.
The filter indicator can also be reset from within the Dyson Link app.
Replacing the filter unit
Clean the hatch every time the filter
is replaced. Open the small hatch on
the side of the appliance. Use a cotton
bud to clean inside and remove any
debris. This maintains sensor accuracy
and ensures the continuing high
performance of the appliance.
Loading ...
Loading ...
Loading ...