Loading ...
Loading ...
Loading ...
Rear Tail/Stop, Turn Signal And Backup Lamps
1. Remove the two screws that pass through the bed
sheetmetal.
2. Pull the outboard side of the lamp rearward far
enough to unsnap the two receptacles on the outboard
side of the lamp housing from the two plastic snap
post retainers in the outer box side panel.
3. Disconnect the wiring harness connectors from the
bulb socket.
Tail Lamp Screw Locations
Pulling Out The Tail Lamp
7
MAINTAINING YOUR VEHICLE 827
Loading ...
Loading ...
Loading ...