Loading ...
Loading ...
Loading ...
19
Troubleshooting
Please put back the dust box and the filter screen, and confirm that the filter
screen and the dust box are installed in place.
Please let it dry for at least 24 hours if the strainer is not dry;
Filter may be blocked, please clean the filter; If could not be solved, please
replace the filter mesh.
The robot cleaner may be stuck or trapped. Please clear obstacles around
the robot cleaner.
Please check if the main wheel is stuck
The dust box has been taken out
Please clean the dust box and filter mesh
Solutions
The power is low and start to recharge The power is low, please charge before using.
Please check the top radar cover to see if it is
compressed or stuck
The laser head pressure sensor is pinned or stuck. Please move to a new
position to start.
Please wipe the sensor on the right side of the robot
cleaner and move to a new position to restart
The sensor along the wall is blocked by dust, please wipe the sensor along
the wall.
The fan is abnormal Dust collector fan cannot work normally. Please try to shut down and restart.
The battery is damaged or not installed
The temperature is too high or too low. Please wait for the battery
temperature to be normal before using.
Note: Restart after shutdown to eliminate some of the possible mal-fucntion.
Common parameters
Loading ...
Loading ...
Loading ...