Loading ...
Loading ...
Loading ...
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual Page 41
/
41 / 50
EN
Operating the product
Rinse Aid indicator ( )
Please check the rinse aid indicator
on the display to see whether there is
adequate amount of rinse aid in the
dishwasher or not. You need to refill
the rinse aid reservoir with rinse aid
whenever rinse aid indicator appears on
the display of your machine.
End of programme
C
When the programme you
have selected comes to an
end, an audible warning
signal will warn you to turn off
your machine. This audible
signal will warn you with
certain intervals before it
turns off.
End of Programme indicator will light up
when the washing programme is over.
1. Open the door of the machine.
2. Press On/Off key to turn off your
machine.
3. Close the tap.
4. Unplug the machine from the
socket.
C
For energy saving, the
machine is automatically
turned off following the
completion of the programme
or if the programme is not
started.
C
Leave your dishes in the
machine for about 15
minutes to allow them cool
down after they are washed.
Your dishes will dry in a
shorter time if you leave
the door of your machine
ajar during this period. This
process will increase the
drying effectiveness of your
machine.
Water cut-off warning
If mains water is cut or water inlet tap
is turned off the machine cannot take
water in and E:02 icon will flash on the
programme indicator. As long as the
problem continues, washing programme
is paused and the water inlet is checked
regularly by the machine; when
the water is restored E:02 icon will
disappear after a while and the washing
programme resumes.
Overowing warning
If the machine intakes too much
water or there is leakage at any of the
components then the machine will
detect this and E:01 icon will flash on
the Programme indicator. As long as the
overflowing continues safety algorithm
will be active and try to discharge the
water. If overflowing stops and safety
is assured, E:01 icon will disappear.
If E:01 does not disappear, there is
a permanent fault. In this case the
authorised service should be contacted.
InnerClean
This programme is recommended
to be operated on each 1-2 months
for machine cleaning and necessary
hygiene. The programme should be
operated while the machine is empty.
In order to achieve an efficient result, it
is recommended to use together with
special machine cleaning agents.
C
Do not use this programme to
clean dishes. As it operates
in high temperatures, it is
harmful for the dishes.
Loading ...
Loading ...
Loading ...