Loading ...
Loading ...
Loading ...
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual Page 11
/
11 / 50
EN
Installation
Aquasafe+
(depends on model)
The Aquasafe+ system protects against
water leaks that may occur at the hose
inlet.Water contact with the valve box of
the system must be avoided to prevent
damage to the electrical system. If the
Aquasafe+ system is damaged, unplug
the product and call the Authorised
Service Agent.
A
As the hose set contains
electrical connections and
assemblies, never shorten
or lengthen the hose with
extension hoses.
• The voltage and allowed fuse or
breaker protection are specified in
the “Technical specifications” section.
If the current value of the fuse or
breaker in the house is less than 16
Amps, have a qualified electrician
install a 16 Amp fuse.
• The specified voltage must be equal
to your mains voltage.
• Do not make connections via
extension cables or multi-plugs.
B
Damaged power cables
must be replaced by the
Authorised Service Agent.
B
If your dishwasher is
equipped with internal
illumination, lamp should
only be replaced by the
Authorised Service Agent
in case of failures that may
occur on the lamp.
B
If the product has a failure,
it should not be operated
unless it is repaired by the
Authorised Service Agent!
There is the risk of electric
shock!
Initial use
Before starting to use the product, make
sure that all preparations are made
in accordance with the instructions in
sections “Important safety instructions” and
“Installation”.
• To prepare the product to do the
dishes, perform first operation in the
shortest programme with detergent
while the machine is empty. During
the initial use, fill the salt reservoir with
1 litre of water prior to filling it with salt.
A
There might be a small
amount of water left in the
product after factory quality
control tests. This has no
harm on the product.
Electrical connection
Connect the product to a grounded
outlet protected by a fuse complying
with the values in the “Technical
specifications” table. Our company shall
not be liable for any damages that will
arise when the product is used without
grounding in accordance with the local
regulations.
• Connection must comply with
national regulations.
• Power cable plug must be within
easy reach after installation.
B
Unplug the product after the
washing programme is over.
Loading ...
Loading ...
Loading ...