Loading ...
Loading ...
Loading ...
Page 40 EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual
40 / /50 EN
Operating the product
Changing the settings while Time
Delay function is active
While the Time Delay function is
activated, you cannot make changes
in the washing programme, auxiliary
functions or the duration of delay time.
C
Programme and auxiliary
functions cannot be set/
changed after the programme
has started.
To cancel the Time Delay function
Open the door of the product Press
and hold the Programme Selection /
Programme Cancel keys for 3 seconds.
After the 3 - 2 - 1 countdown, 0:01 is
displayed, close the door of the product
and wait for the draining process
complete. Draining is completed in
2 minutes and the machine gives an
audible warning when it is completed.
C
You can select and start a
new programme following the
cancellation of Time Delay
function.
C
Time Delay function cannot
be set after the programme
starts.
Starting the programme
Close the door of your machine to start
it after selecting the programme and
auxiliary functions.
C
Your machine performs water
softening depending on the
hardness level of the supply
water. Washing time can
change while the programme
is running depending on the
ambient temperature where
your machine is installed,
temperature of the supply
water and amount of the
dishes.
C
Pay attention not to open the
door of the machine when
it is running. There may
be a rush of vapour when
you open the door of your
machine; be careful.
C
The machine will remain
silent in pause mode for
some time in order to remove
the water from the machine
and on the dishes completely
and to have the water
softener cleaned, and then it
will resume running in drying
mode.
Cancelling the programme
Open the door of the product Press
and hold the Programme Selection /
Programme Cancel keys for 3 seconds.
After the 3 - 2 - 1 countdown, 0:01 is
displayed, close the door of the product
and wait for the draining process
complete. Draining is completed in
2 minutes and the machine gives an
audible warning when it is completed.
C
There might be residues of
detergent or rinse aid in the
machine and/or on the pieces
being washed depending on
the step the programme you
have cancelled was in.
Salt indicator ( )
Please check the salt indicator on
the display to see whether there is
adequate amount of softening salt in
the dishwasher or not. You need to refill
the salt reservoir with salt whenever salt
indicator appears on the display of your
machine.
C
Adjusting the water hardness
level is explained in Water
Softening System section.
Loading ...
Loading ...
Loading ...