Loading ...
Loading ...
Loading ...
EDWB14G 60cm Freestanding Black Glass Dishwasher User Manual Page 15
/
15 / 50
EN
Preparation
C
Since different salt brands
in the market have different
particle sizes and since the
water hardness may vary,
dissolution of the salt in water
may take a couple of hours.
Therefore, Salt Indicator
remains on for a while after
adding salt into the machine.
Loose salt grains can cause
rust marks in your machine if
not rinsed away. Only fill salt
just before a programme is
run.
Detergent
You can use powder, liquid/gel and
tablet detergents in the machine.
C
Only use the detergents
produced particularly for use
with dishwashers. Never
use washing up liquids.
We recommend you not to
use detergents that contain
chlorine and phosphate
as they are harmful for the
environment.
Adding detergent
C
Refer to the “Programme
Table” to determine the
correct amount of detergent
for the selected programme.
C
In order to have good
washing and drying results,
always follow the instructions
on the detergent packaging.
If you have further questions,
we recommend to contact
with the producer of the
detergent.
C
Before initial use, fill the
water softening system with
1 litre of water (C).
3. Fill the salt reservoir with salt by
using salt funnel (D). To speed up
dissolution rate of salt in water, stir it
with a spoon.
C
You can put about 2 kg of
dishwasher salt into the salt
reservoir.
4. Replace the lid and tighten it
securely when the reservoir is full.
5. If you will not start a washing
programme immediately after
adding the salt, run the machine
empty in the shortest programme
to dissolve and wash away the
scattered salt in the machine.
Loading ...
Loading ...
Loading ...