Loading ...
Loading ...
Loading ...
EN
Instructions for the Installer
32
15 INSTALLING THE APPLIANCE
15.1 Before installation
Check that the input voltage indicated on the characteristics plate is the
same as the voltage of the power outlet you are going to use.
Open the oven door and take out all the accessories and remove the
packing material.
Warning! The front surface of the oven may be covered in a protective
film. Before using the oven for the first time, carefully remove this film,
starting on the inside.
Make sure that the oven is not damaged in any way. Check that the
oven door closes correctly and that the interior of the door and the front of
the oven opening are not damaged.
DO NOT USE THE OVEN if the power cable or the plug is damaged, if the
oven does not function correctly or if it has been damaged or dropped.
Put the oven on a flat and stable surface. The oven must not be installed
close to any sources of heat, radios or televisions.
During installation, make sure that the power cable does not come
into contact with any moisture or objects with sharp edges and the
back of the oven. High temperatures can damage the cable.
Warning: after the oven is installed you must make sure you can
access the plug.
15.2 Electrical connection
The nameplate with the technical data, serial number and mark is in a
visible position on the oven door frame.
The nameplate must never be removed.
The appliance must be connected to earth in compliance with electrical
system safety regulations.
If a permanent connection is used, the appliance's power supply line must
be fitted with an omnipolar breaking device with contact gap of at least 3
mm, located in an easily accessible position close to the appliance itself.
If a socket and plug connection is used, check that they are of the same
type. Do not use reducers, adapters or junctions since they may cause
overheating or burns.
Loading ...
Loading ...