Loading ...
Loading ...
Loading ...
EN
Instructions for the User
15
The cooking duration is calculated based on the food’s type but can be
changed by pressing PT1.
Turn PT1 to the right or left to change the preset cooking duration.
Press PT2 to immediately start the defrost process or otherwise press PT1
to set a different time for the defrost process start (please refer to point
“10.1.7 Delayed Start Time”).
The temperature will be automatically set to achieve the best results.
The following table shows the programmes, indicating the time that the
function will take.
PROGRAM
TYPE OF
FOOD
TEMPERATURE
ºC
TIME
(MIN)
INSTRUCTIONS CONTAINER
LEVEL
r 1 PLATE DISHES
100°C 13
RACK 2
r 2
READY-MADE
MEALS /
FROZEN
100°C 18
REMOVE LID
FROM
CONTAINER
AND PUT ON
RACK.
RACK 2
r 3
BEANS 100°C 35
RACK 2
r 4
CHERRIES 80°C 35
RACK 2
r 5
PLUMS 90°C 35
STERILISING:
THE TIMES AND
TEMPERATURE
S REFER TO 1L
PRESERVING
JARS.
RACK 2
r 6
BABY
BOTTLES
100ºC 12
RACK 2
10.1.6 Defrost function (Manual program)
After selecting this function, press PT1 to modify the preset cooking
duration and the DSP1 starts to blink.
Turn PT1 to the right or left to change the preset defrosting duration.
Please consider the information on the defrosting table (see point 10).
Press PT2 to immediately start the defrost process or otherwise press PT1
to set a different time for the defrost process start (please refer to point
“10.1.7 Delayed Start Time”).
10.1.7 Delayed Start Time
When PT1 is pressed to define a delayed start time the corresponding
light starts to blink, DSP1 shows the current time and DSP 2 shows
“Auto”.
Turn PT1 to the right or left to change the delayed start time.
Press PT2 to validate the delayed start time.
The oven enters in an idle state waiting for the defined start time. DSP3
shows the selected function and DSP1 and DSP2 show all the defined
parameters for the function continuously alternating.
If you wish to start the function before the selected time, just press PT2.
If you wish to cancel the programming, press PT2 for 3 seconds.
10.2 When the oven is working…
IT IS NORMAL THAT SOME STEAM ESCAPES THROUGH THE
OPENING BETWEEN THE DOOR AND CONTROL PANEL DURING THE
Loading ...
Loading ...
Loading ...