Loading ...
Loading ...
Loading ...
25 / EN
Dryer / User Manual
Operating the product
Adding / removing laundry while the
dryer is in operation
• In order to add or take out laundry after
the drying programme has started:
• Press the Start/Pause button to switch
the dryer to Pause mode. Drying process
will pause.
• While in Pause mode, open the loading
door, add or take out laundry and close
the loading door.
• Press the Start/Pause button to resume
the program.
C
Any laundry added after the
drying process has started may
cause the clothes that are already
dried in the machine intermingle
with wet clothes and the result
will be wet laundry after the
drying process is over.
C
You may repeat laundry adding
or removing process as many
times as you desire during
drying. However, this process will
increase the programme time and
energy consumption since the
drying process will be interrupted
repeatedly. Therefore, it is
recommended to add laundry
before the drying programme has
started.
C
If you select a new programme by
turning the Programme Selection
knob while your drier is in Pause
mode, then the current program
is aborted and new programme
information is displayed.
Do not touch the inner surface of
the drum when adding or taking
out laundry while a programme is
running. Drum surface and dryer
air within is hot.
5.15 Canceling the programme
To cancel the programme after the dryer is
started:
• Press and hold Start / Pause button for
1 seconds to pause the programme and
turn the programme selection knob.
• Press and hold On / Off / Cancel Button
for 3 seconds and the programme will be
cancelled.
A
As the dried laundry will be
excessively hot when you cancel
the programme while the dryer
is running, activate the Refresh
programme to cool them down.
5.16 End of programme
When the programme comes to an end
Lint filter cleaning and Water tank warning
symbols light up in the programme follow-up
indicator. To turn off the dryer press On / Off
/ Cancel button.
C
2-hour Anti-creasing program will
be activated if the laundry is not
taken out after the program has
come to an end.
C
Clean the lint filter after each
drying. See 6.1 Cleaning lint
filter and loading door inner
surface.
C
Drain the water tank after each
drying cycle. See 6.3 Draining
the water tank.
Loading ...
Loading ...
Loading ...