Loading ...
Loading ...
Loading ...
12
STEP 6 - CONNECT VENT SYSTEM
(NON‑VENTEDINSTALLATIONONLY)
IMPORTANT: If the air deector is not installed correctly, air will ow freely inside the
vent duct covers instead of being forced out of the vent openings on the side of the
vent duct cover.
1. Using the four screws (provided) in the Recirculation Kit, fasten the air deector
to the duct cover bracket.
a
b
c
a
a Assembly Screws
b Air Deector
c Duct Cover Bracket
2. Measure from the bottom of the air deector to the bottom of the hood exhaust
outlet.
X
a
c
b
d
e
a Air deector
b Vent clamp
c X = length to cut vent duct
d Vent duct
e Exhaust outlet
3. Cut the duct to the measured size (X).
4. Remove the air deector.
5. Slide the duct onto the bottom of the air deector.
6. Place the assembled air deector and duct over the exhaust outlet from the
hood.
7. Using the four screws removed in Step 4, reattach the air deector to the duct
cover bracket.
8. Seal connections with vent clamps.
Loading ...
Loading ...
Loading ...