Loading ...
Loading ...
Loading ...
10
2. Attach support bracket to wall ush to the ceiling using two - 5 x 45 mm screws.
a
b
c
a Ceiling
b Wall
c Centerline
STEP 4 - COMPLETE PREPARATION
1. Determine the required height for the home power supply cable and drill a 1¼"
(3.2 cm) hole at this location.
2. Run the home power supply cable according to the National Electrical Code
or CSA Standards and local codes and ordinances. There must be enough ½"
conduit and wires from the fused disconnect (or circuit breaker) box to make the
connection in the hood’s electrical terminal box.
NOTE: Do not reconnect power until installation is complete.
3. Use caulk to seal all openings.
STEP 5 - INSTALL RANGE HOOD
IMPORTANT:
•
If the range hood is being installed above an installed range, ensure the range is
turned o and has cooled completely before beginning installation.
•
Do not remove the plastic lm from the range hood until installation is complete.
WARNING
Excessive Weight Hazard
Use two or more people to move and install range hood.
Failure to do so can result in back or other injury.
Loading ...
Loading ...
Loading ...