Loading ...
Loading ...
Loading ...
76
ENGLISH
4
Remove the water tank, and if installed, remove the INTENZA+ water
lter. Pour the entire content of the Saeco decalci er.
Then ll the water tank with fresh water up to the MAX level. Press the
“OK”
button.
5
Empty the (internal) / (external) drip tray. Press the “OK” button.
6
Fill half the milk carafe with fresh water. Insert the carafe and open the
milk dispenser by turning it clockwise. Press the “OK” button.
7
Place a large container (1,5 lt) under the hot water/steam wand and
milk dispenser spout of the carafe. Press the “OK” button.
8
The machine will start dispensing the descaling solution at intervals.
The bar on the display shows the cycle progress.
Note:
To empty the container during the process, the descaling cycle may be
paused by pressing the “PAUSE” button. To resume the cycle, press the
“START” button.
9
The message indicates the end of the rst step. The water tank needs
to be rinsed. Fill the water tank with fresh water up to the MAX level.
Press the “OK” button.
REFILL WATER TANK
WITH DESCALING SOLUTION
OK
EMPTY DRIP TRAY PLACED
UNDER THE BREW GROUP
OK
FILL THE CARAFE HALFWAY
WITH FRESH WATER AND INSERT
IT IN BREWING POSITION
OK
PLACE A CONTAINER UNDER HOT
WATER & CARAFE DISP. SPOUTS
OK
RINSE THE WATER TANK AND
FILL WITH FRESH WATER
DESCALING CYCLE
PAUSE
STEP 1/2
DESCALING CYCLE...
Loading ...
Loading ...
Loading ...