Loading ...
Loading ...
Loading ...
15
EN
Please note: general indications when preparing all
milk based drinks
• : press to interrupt preparation completely and go
back to the homepage.
• : press to interrupt milk or coee delivery and
move on to the next delivery (if applicable) to complete the
beverage.
• At the end of delivery, to increase the quantity of coee in
the cup, press .
• Preparation of each milk based drink can be customised
(see sections “Customising beverages” and “Memorising
your personal prole”).
• Do not leave the milk container out of the fridge for a long
time: as the temperature increases (5°C ideal), the quality
of the foam decreases.
Once the coee has been made, the appliance is ready to make
the next beverage.
Cleaning the milk container after use
Danger of burns!
When cleaning the internal tubes of the milk container, a little
hot water and steam leak out of the frothed milk spout (D5).
Avoid contact with splashes of water. Each time a milk function is
used, TURN MILK FROTH ADJUSTMENT KNOB TO CLEAN TO START
CLEANING appears on the display and the milk frother lid must
be cleaned:
1. Leave the milk container (D) in the machine (you do not
need to empty it);
2. Place a cup or other recipient under the frothed milk spout
(g.20);
3. Turn the foam adjustment dial (D1) to CLEAN (g.21):
CLEANING MILK CONTAINER PLACE A CUP UNDER THE MILK
OUTLET (FIG.22) appears on the display (B) together with
a bar which gradually lls as cleaning proceeds. Cleaning
stops itself automatically;
4. Turn the dial back to one of the froth selections;
5. Remove the milk container and always clean the steam
connection nozzle (A10) with a sponge (g.23).
Please note:
• If a number of milk based drinks need to be made, only
clean the milk container after preparing the last beverage.
To proceed with making the next beverages, when the
CLEAN message is displayed, press .
• If the milk container does not get cleaned, the symbol
appears on the display as a reminder that the milk contain-
er needs cleaning.
• The milk container can be kept in the refrigerator.
• In some cases, to carry out the cleaning the appliance re-
quires a short time to heat up.
DELIVERING HOT WATER
Danger of burns!
Do not leave the appliance unattended while hot water is being
delivered.
1. Make sure the hot water/steam spout (C6) is attached cor-
rectly to the hot water/steam connection nozzle (A10);
2. Place a container under the spout (as close as possible to
avoid splashes);
3. Select HOT WATER from the homepage. The corre-
sponding image appears on the display (B), together with a
progress bar which lls gradually as preparation proceeds;
4. The machine delivers hot water, then delivery stops auto-
matically. To interrupt hot water delivery manually, press
.
Please note:
• If "Energy Saving" mode is active, there may be a few sec-
onds delay before hot water is delivered.
• Preparation of hot water can be customised (see sections
“Customising beverages” and “Memorising your personal
prole”).
STEAM DELIVERY
Danger of burns!
Do not leave the appliance unattended while steam is being
delivered.
1. Make sure the hot water/steam spout (C6) is attached cor-
rectly to the hot water/steam connection nozzle (A10);
2. Fill a container with the liquid to be heated or frothed and
immerse the hot water/steam spout in the liquid;
3. Select " STEAM" from the homepage. The corre-
sponding image appears on the display (B), together with
a progress bar which lls gradually as preparation proceeds
and after a few seconds, steam to heat the liquid is deliv-
ered from the hot water/steam spout;
4. When the required temperature or level of froth is reached,
interrupt steam delivery by pressing ;
Important!
Always stop steam delivery before extracting the container con-
taining the liquid to avoid burns from splashes.
Loading ...
Loading ...
Loading ...