Loading ...
Loading ...
Loading ...
11
EN
Please note:
To enable this function, the time must already be set correctly,
see paragraph “Set time ”.
To enable auto-start, proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or (B8) until the display (B) shows
AUTOSTART;
3. Select the function by pressing : The time setting panel
appears on the screen;
4. Press or corresponding to the hours and minutes
until the required auto-start time is displayed;
5. Press or to enable or disable au-
to-start.
6. To conrm, press (to cancel and go back to the
settings menu press ), then press to go
back to the homepage.
The auto-start time is now set and the corresponding symbol is
displayed next to the time to indicate that the function has been
enabled.
Please note:
When the appliance is turned o using the main switch (A21),
the auto-start setting if enabled, is lost.
Auto-o (standby)
Auto-o can be set so that the appliance goes o after 15 or 30
minutes, or 1, 2 or 3 hours of no use.
To programme Auto-o, proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or (B8) until the display (B)
shows AUTO-OFF, together with the current selection (15 or
30 minutes, or 1, 2 or 3 hours);
3. Press on the display to select the required value;
4. Press to go back to the homepage.
Auto-o is now programmed.
Cup warmer
To warm the cups before making coee, it is possible to activate
the cup warmer (A24) and put it above the cups.
1. Press " " (B2) to enter the menu;
2. Press (B10) or
(B8)
until the display (B) shows "
CUP WARMER";
3. Press to activate- or de-activate -
the cup warmer.
4. Press " " to go back to the homepage.
Energy saving
Use this function to enable or disable energy saving mode. When
enabled, the function guarantees reduced energy consumption
in compliance with European regulations. When it is disabled,
warming time is reduced.
To disable or enable "Energy Saving", proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or (B8) until ENERGY SAVING ap-
pears on the display (B);
3. Press to enable- or disable- en-
ergy saving.
4. Press to go back to the homepage.
Coee temperature
To modify the temperature of the water supplied to make the
coee, proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or (B8) until the display (B) shows
COFFEE TEMPERATURE together with the current selection
(LOW, MEDIUM, HIGH, OR MAX);
3. Press to select the required temperature;
4. Press to go back to the homepage.
Water hardness
For instructions related to setting water hardness, see section
“Setting water hardness”.
Selecting the language
To modify the language of the display (B), proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or (B8) until the display shows
SET LANGUAGE;
3. Press : press or until the ag corresponding
to the required language is shown and then select it;
4. Press 2 times to go back to the homepage.
Sound notication
This enables or disables the beep emitted by the machine each
time an icon is pressed or an accessory is inserted/removed. To
disable or enable the beep, proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or (B8) until the display (B) shows
BEEP;
3. Press to enable- or disable- the
sound notication;
4. Press to go back to the homepage.
Loading ...
Loading ...
Loading ...