Loading ...
Loading ...
Loading ...
PN 365-095-30000 x.2 SURFboard SB8200 Cable Modem User Guide
Copyright 2016 ARRIS Enterprises, LLC. All rights reserved. 15
Chapter 4
Installing the Cable Modem
Caution: This product is for indoor use only. Do not route the Ethernet cable(s) outside of the
building. Exposure of the cables to lightning could create a safety hazard and damage the
product.
Connect the SB8200 to Your Computer
Before installing your SB8200:
Check with your service provider to ensure broadband cable service is available in your
area.
Choose a location in your home where your computer and cable modem are preferably
near existing cable and electrical wall outlets.
Figure 4: SB8200 Connection Diagram
1. Check that a coaxial cable is already connected to a cable wall outlet or RF splitter (not
included).
2. Connect the other end of the coaxial cable to the Cable connector on the rear of your
SB8200.
Use your hand to tighten the connectors to avoid damaging them.
3. Connect the Ethernet cable to either Ethernet port on the rear of your SB8200.
4. Connect the other end of the Ethernet cable to the Ethernet port on your computer.
5. Connect the power cord to the Power port on the rear of your SB8200.
Loading ...
Loading ...
Loading ...