Loading ...
Loading ...
Loading ...
2
Instruments and controls
29
READY TO SET OFF
W
arn
i
n
g
l
amps
Each time the vehicle is started: a series of warning lamps comes on applying a self-test check. They go off almost
immediately. When the engine is running: the warning lamp becomes a warning if it remains on continuously or fl ashes.
This initial warning may be accompanied by an audible signal and a message which appears in the screen.
Do not ignore these warnings.
Warning lamp is indicates Solution - action
STOP
on, associated
with another
warning
lamp and
accompanied
by a message
in the screen.
major faults linked with
the "Brake fl uid level",
"Engine oil pressure and
temperature", "Coolant
temperature", "Electronic
brake force distribution",
"Power steering" and
"Under-infl ation detection"
warning lamps.
You must stop as soon as it is safe to do
so, park and switch off the ignition. Have it
checked by a PEUGEOT dealer or a qualifi ed
workshop.
Parking
brake /
Brake
fl uid level /
EBFD
on.
that the parking brake is applied
or has not been released fully.
Releasing the parking brake switches off the
warning lamp.
on. low brake fl uid level. Top up using a fl uid recommended by PEUGEOT.
remaining on
even though the
level is correct
and associated
with the ABS
warning lamp.
a fault with the electronic
brake force distribution.
You must stop as soon as it is safe to do so,
park and switch off the ignition. Have it checked
by a PEUGEOT dealer or a qualifi ed workshop.
Engine oil
pressure and
temperature
on while
driving.
low pressure or a high
temperature.
Park and switch off the ignition then allow to
cool. Visually check the level. Chapter 6, "Levels"
section.
remaining on,
even though
the level is
correct.
a major fault.
Have it checked by a PEUGEOT dealer or a
qualifi ed workshop.
Loading ...
Loading ...
Loading ...