User Manual - Page 123

For 2013 PEUGEOT PARTNER.

Loading ...
Loading ...
Loading ...
Snow screen
121
QUICK HELP
7
REMOVABLE SNOW SCREEN
According to country, the removable
snow screen is installed on the lower
part of the front bumper to prevent the
accumulation of snow at the radiator
cooling fan.
Do not forget to remove the snow
screen when the exterior temperature
is higher than 10°C (no risk of snowfall)
and when towing.
FITTING
REMOVAL
- Pass a screwdriver into the hole
located near each of the clips.
- Use the screwdriver as a lever to
unclip the four clips B in turn.
- Offer up the snow screen facing its
centring pin A on the front bumper.
- Put it in place by pressing at each
clip B located in the four corners.
6. REFITTING THE REPAIRED
WHEEL
The wheel is re tted as described
in step 5, not forgetting to re t the
wheel trim.
Refer to the "Identi cation
markings" section of chapter 8 to
locate the tyre label.
Refer to the "Instruments and
controls" section of chapter 2,
"Tyre under-in ation detection"
part, for recommendations after
changing a wheel tted with a tyre
under-in ation detection sensor.
The spare wheel is not designed
to be used over long distances.
Have the tightening of the bolts
and the tyre pressure checked by
a PEUGEOT dealer or a quali ed
workshop as soon as possible. Have
the original wheel repaired and re tted
by a PEUGEOT dealer or a quali ed
workshop as soon as possible.
Loading ...
Loading ...
Loading ...