Loading ...
Loading ...
Loading ...
8 English
Installing the hob
Installing the hob
01
02
03
04 06
05
L N
1N
~
(32A)
01 220-240 V
~
04 Blue
02 Brown 05 Gray
03 Black 06 Green/Yellow
01
02
03
04
05
07
06
L1 L2 N
2N
~
(16A): Separate the 2-phase wires
(L1 and L2) before connection.
01 220-240 V
~
05 Blue
02 380-415 V
~
06 Gray
03 Brown 07 Green/Yellow
04 Black
01 04
02
03
05
06
07
L1 N1 L2 N2
2 x 1N
~
(16A): Separate the wires before
connection.
01 220-240 V
~
05 Black
02 Brown 06 Gray
03 Blue 07 Green/Yellow
04 220-240 V
~
WARNING
For correct supply connection, follow the wiring diagram attached near the
terminals.
Connecting to the mains power supply
Before connecting, check that the nominal voltage of the appliance, that is, the
voltage stated on the rating plate, corresponds to the available supply voltage. The
rating plate is located on the lower casing of the hob.
WARNING
Shut off power to circuit before connecting wires to circuit.
The heating element voltage is AC 230 V
~
. The appliance also works perfectly on
networks with AC 220 V
~
or AC 240 V
~
. The hob is to be connected to the mains
using a device that allows the appliance to be disconnected from the mains at all
poles with a contact opening width of at least 3 mm, eg. automatic line protecting
cut - out, earth leakage trips or fuse.
WARNING
The cable connections must be made in accordance with regulations and the
terminal screws tightened securely.
WARNING
Once the hob is connected to the mains supply, check that all cooking zones are
ready for use by briey switching each on in turn at the maximum setting with
suitable cookware.
WARNING
Pay attention (conformity) to phase and neutral allocation of house connection and
appliance (connection schemes); otherwise, components can be damaged.
Warranty does not cover damage resulting from improper installation.
WARNING
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualied persons in order to avoid a hazard.
NZ64K7757BK_EF_DG68-00804A-03_EN.indd 8 7/6/2018 7:03:37 PM
Loading ...
Loading ...
Loading ...