Loading ...
Loading ...
Loading ...
20 English
Hob use
Hob use
Timer (Count up)
For the count up timer to be used, the appliance must be switched on but all the
cooking zones must be not use timer as a safety shutoff.
1. Touch the Timer control sensor.
will appear in the timer display.
2. The count up timer function becomes
active and the display numbers
increase over time. To cancel the timer
settings, hold down the Timer control
sensor for 2 seconds.
3. To stop the timer, touch the Timer
control
sensor.
4. To cancel the timer settings, select the
target burner and hold down the Timer
control
sensor for 2 seconds. This
will cancel the burner’s timer settings
with a beep. If holding down the Timer
control
sensor for 2 seconds without
selecting a burner, this will cancel
the timer settings of the last changed
burner.
To display the time remaining for any of the cooking zones, use the Timer control
sensor after select burner.
The corresponding control indicator will begin to blink slowly.
The settings are reset using the Timer setting sensor (
or ). After the set period
of time has elapsed, the cooking zone automatically switches itself off, an acoustic
signal sounds as conrmation and the timer display indicates.
NOTE
To change the settings quicker, touch and hold any of the
or control sensors
until the desired value is reached.
NZ64K7757BK_EF_DG68-00804A-03_EN.indd 20 7/6/2018 7:03:44 PM
Loading ...
Loading ...
Loading ...