Loading ...
Loading ...
Loading ...
265
3 Setting the FlashN
Flash mode
Normally, set this to [E-TTL II]. This
enables autoexposure shooting with the
built-in flash.
To set the flash output level manually,
select [Manual flash].
Select [2flash output], then set the
flash output level to within 1/1 - 1/128
(1/3-stop increments) before shooting.
This mode is for advanced users.
With [MULTI flash] selected, you can
use a slow shutter speed to capture
multiple moments of a moving subject in
one image.
First set the [2flash output],
[Frequency], and [Flash count], then
shoot. This mode is for advanced users.
Built-in Flash Settings
To prevent the flash from damage due to overheating, do not use MULTI
flash more than ten consecutive times. If you use MULTI flash 10 times,
allow the flash to rest for at least 10 min. before firing the flash again.
Flash will be output at 1/128 - 1/4 for MULTI flash.
Loading ...
Loading ...
Loading ...