Loading ...
Loading ...
Loading ...
1.5.5 Charge Complete
Alerts you when charging is complete.
1.5.6 Accessory Input
Alerts you when an accessory is successfully attached.
1.6 Power On/Off Tone
Allows you to set the phone to sound a tone when
the phone is powered on and off.
1. Press , , , .
2. Use to set to
On
/
Off
, then press .
1.7 DTMF Length
Allows you to set the Key tone length and touch tone
playback speed.
1. Press , , , .
2. Select either of the following then press .
Normal
Sends out a tone for a fixed period of
time even if you keep the key pressed.
Long
Sends out a continuous tone for as long
as you keep the key pressed.
59
SETTINGS
Note
Dual-Tone Multi Frequency (DTMF) Signaling by
the simultaneous transmission of two tones, one
from a group of low frequencies and another
from a group of high frequencies. Each group of
frequencies consists of four frequencies. Setting
the Key Beep length to Long will extend the
DTMF tone.
UX210_Eng.qxd 6/22/06 3:27 PM Page 59
Loading ...
Loading ...
Loading ...