IMPORTANT SAFETY PRECAUTIONS
1
IMPORTANT SAFETY PRECAUTIONS
Read these instructions. Breaking the rules may be dangerous or illegal.
Further detailed information is given in this user guide.
WWAARRNNIINNGG!!
VViioollaattiioonn ooff tthhee iinnssttrruuccttiioonnss mmaayy ccaauussee sseerriioouuss iinnjjuurryy oorr ddeeaatthh..
1. Never use an unapproved battery since this could damage the phone and/or battery and could
cause the battery to explode.
2. Never place your phone in a microwave oven as it will cause the battery to explode.
3. Never store your phone in temperatures less than -4°F or greater than 122°F.
4. Do not dispose of your battery by fire or with hazardous or flammable materials.
5. When riding in a car, do not leave your phone or set up the hands-free kit near to the air bag.
If wireless equipment is improperly installed and the air bag is deployed, you may be seriously
injured.
6. Do not use a hand-held phone while driving.
7. Do not use the phone in areas where its use is prohibited. (For example: aircraft)
UX210_Eng.qxd 6/22/06 3:26 PM Page 1
IMPORTANT SAFETY PRECAUTIONS
2
IMPORTANT SAFETY PRECAUTIONS
1. Do not expose the battery charger or adapter to direct sunlight or use it in places with high
humidity, such as a bathroom.
2. Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to clean
your phone. This could cause a fire.
3. Do not drop, strike, or shake your phone severely. It may harm the internal circuit boards of the
phone.
4. Do not use your phone in high explosive areas as the phone may generate sparks.
5. Do not expose the battery charger or adapter to direct sunlight or use it in places with high
humidity, such as a bathroom.
6. Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if
it is loose as it may cause a fire or electric shock.
7. Do not place any heavy items on the power cord. Do not allow the power cord to be crimped as
it may cause electric shock or fire.
8. Do not handle the phone with wet hands while it is being charged. It may cause an electric
shock or seriously damage your phone.
9. Do not disassemble the phone.
UX210_Eng.qxd 6/22/06 3:26 PM Page 2
3
IMPORTANT SAFETY PRECAUTIONS
1. Do not place or answer calls while charging the phone as it may short-circuit the phone and/or
cause electric shock or fire.
2. Do not hold or let the antenna come in contact with your body during a call.
3. Make sure that no sharp-edged items such as animal’s teeth or nails, come into contact with the
battery. This could cause a fire.
4. Store the battery out of reach of children.
5. Be careful that children do not swallow any parts (such as rubber plugs, earphone, connection
parts of the phone, etc.) This could cause asphyxiation or suffocation resulting in serious injury
or death.
6. Unplug the power cord and charger during lightning storms to avoid electric shock or fire.
7. Only use the batteries and chargers provided by LG. The warranty will not be applied to
products provided by other suppliers.
8. Only authorized personnel should service the phone and its accessories. Faulty installation or
service may result in accidents and consequently invalidate the warranty.
9. An emergency call can be made only within a service area. For an emergency call, make sure that
you are within a service area and that the phone is turned on.
UX210_Eng.qxd 6/22/06 3:26 PM Page 3
TABLE OF CONTENTS
TABLE OF CONTENTS
4
IMPORTANT SAFETY
PRECAUTIONS 1
Table of Contents 4
Welcome 9
FCC RF Exposure Information 11
Phone Overview 12
Menus Overview 14
Getting Started with Your
Phone 16
The Battery 16
Installing the Battery 16
Removing the Battery 16
Charging the Battery 16
Battery Charge Level 16
Turning the Phone On and Off 17
Turning the Phone On 17
Turning the Phone Off 17
Signal Strength 17
Screen Icons 18
Making Calls 19
Correcting Dialing Mistakes 19
Redialing Calls 19
Receiving Calls 19
Quick Access to Convenient
Features 20
Manner Mode 20
Lock Mode 20
Mute Function 20
Volume Quick Adjustment 20
Call Waiting 21
Caller ID 21
Speed Dialing 21
To dial Speed Dials 21
Entering and Editing
Information 22
Text Input 22
Key Functions 22
T9Word (T9) Mode 22
Using the NEXT Key 22
Abc (Multi-tap) Mode 23
123 (Numbers) Mode 23
Symbols Mode 23
Changing Letter Case 23
Contacts in Your Phone’s
Memory 24
Storing Basics 24
Customizing Individual Entries 24
Speed Dial 25
Storing a Number with Pause 26
Editing Contacts Entries 26
From Standby Mode 26
From the Contact List Screen 26
UX210_Eng.qxd 6/22/06 3:26 PM Page 4
5
TABLE OF CONTENTS
Adding a Pause to a Contact Entry 27
Changing Saved Information 27
Changing the Default Number 28
Deleting 28
Deleting a Phone Number 28
Deleting a Contact Entry 29
Deleting a Speed Dial 29
Searching Your Phone's Memory 29
Scrolling Through Your Contacts 29
Searching by Letter 29
Calling From Your Phone's Memory 30
From Contacts 30
From Recent Calls 30
Speed Dialing 31
Contacts 32
1. List Contacts 33
2. New Number 33
3. New E-mail 34
4. Groups 34
5. Speed Dials 34
6. Voice Dials 35
7. My Contact Info 35
Recent Calls 36
1. Dialed Calls 37
2. Received Calls 37
3. Missed Calls 37
4. Erase Calls 38
5. Call Timer 38
6. KB Counter 38
Messages 39
1. Voice Mail 40
2. New Message 40
Text Message Basics 40
Customizing the Text Message Using
Options 41
Using Contacts to Send a Text
Message 41
Text Options 42
3. Inbox 43
4. Outbox 44
5. Saved 45
6. Msg Settings 46
6.1 Auto Save 46
6.2 Auto Erase 46
6.3 Text-Callback # 46
6.4 Voice Mailbox # 46
6.5 Text-Signature 46
6.6 Text-Auto View 47
6.7 Entry Mode 47
UX210_Eng.qxd 6/22/06 3:26 PM Page 5
TABLE OF CONTENTS
TABLE OF CONTENTS
6
6.8 Quick-Text 47
6.9 Text-Auto Play 47
7. Erase All 47
Voice 48
1. Voice Dial Prompt 48
2. Train Words 48
ee aassyy
edge
SM
49
1.
eeaass yy
edge
SM
50
2. Help 50
Media 51
1. Images 51
2. Sounds 51
3. Melody Composer 52
3.1 Compose Melody 52
3.2 Melody Album 52
3.3 Metronome 52
Tools 53
1. Schedule 53
2. Alarm Clock 54
3. Voice Memo 54
4. My Shortcut 55
5. Notepad 55
6. Ez Tip Calc 55
7. Calculator 56
8. World Clock 56
9. Unit Converter 56
Settings 57
1. Sounds 57
1.1 Ringers 57
1.2 Key Tone 57
1.3 Volume 58
1.4 Message Alerts 58
1.5 Service Alerts 58
1.5.1 Service Change 58
1.5.2 Minute Beep 58
1.5.3 Call Connect 58
1.5.4 Back To Top 58
1.5.5 Charge Complete 59
1.5.6 Accessory Input 59
1.6 Power On/Off Tone 59
1.7 DTMF Length 59
2. Display 60
2.1 Banner 60
2.2 Backlight 60
2.2.1 Main LCD 60
2.2.2 Key Light Timer 61
UX210_Eng.qxd 6/22/06 3:26 PM Page 6
7
TABLE OF CONTENTS
2.3 Screens 61
2.4 Menu Style 61
2.5 Clocks 61
2.6 Theme Colors 61
2.7 Contrast 62
2.8 Fonts 62
2.8.1 Calling Digits 62
2.8.2 Text Editor 62
2.8.3 Menu Font 62
2.9 Language 62
2.0 Power Saver 62
3. System 63
3.1 Select System 63
3.2 Set NAM 63
3.3 Auto NAM 63
3.4 Serving System 63
4. Security 64
4.1 Lock Phone 64
4.2 Restrict Calls 64
4.3 Emergency #s 65
4.4 Change Lock 65
4.5 Erase Contacts 65
4.6 Reset Default 65
5. Call Setup 66
5.1 Auto Retry 66
5.2 Answer Call 66
5.3 Auto-Answer 66
5.4 One-Touch Dial 67
5.5 Voice Privacy 67
5.6 Auto Volume 67
5.7 TTY Mode 67
5.8 Airplane Mode 69
6. Data Settings 70
6.1 PC Connection 70
7. Location 70
Phone Info 71
1. My Phone Number 71
2. S/W Version 71
3. Icon Glossary 71
4. Shortcut Help 71
Safety 72
TIA Safety Information 72
Exposure to Radio Frequency Signal 72
Antenna Care 72
Phone Operation 72
Tips on Efficient Operation 73
Driving 73
Electronic Devices 73
Pacemakers 73
Persons with pacemakers: 73
Hearing Aids 74
Other Medical Devices 74
Health Care Facilities 74
Vehicles 74
Posted Facilities 74
Aircraft 74
UX210_Eng.qxd 6/22/06 3:26 PM Page 7
TABLE OF CONTENTS
8
TABLE OF CONTENTS
Blasting Areas 74
Potentially Explosive Atmosphere 75
For Vehicles Equipped with an Air Bag 75
Safety Information 75
Charger and Adapter Safety 75
Battery Information and Care 76
Explosion, Shock, and Fire Hazards 76
General Notice 77
FDA Consumer Update 78
10 Driver Safety Tips 85
Consumer Information on SAR
87
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
89
ACCESSORIES 91
LIMITED WARRANTY
STATEMENT 92
INDEX 95
UX210_Eng.qxd 6/22/06 3:26 PM Page 8
WELCOME
Thank you for choosing the advanced and compact
UX210 cellular phone, designed to operate with the
latest digital mobile communication technology, Code
Division Multiple Access (CDMA) and Advanced
Mobile Phone Service (AMPS). Along with the many
advanced features of the CDMA system, such as
significantly enhanced voice clarity, this phone offers:
●
eeaassyy
edge
SM
Capability.
●
Large, easy-to-read, 9-line backlit LCD with status
icons
●
Paging, messaging, voice mail, and caller ID.
●
22-key keypad.
●
Speakerphone feature.
●
Menu-driven interface with prompts for easy
operation and configuration.
●
Any key answer, auto answer, auto retry, one-touch
and speed dialing with 99 memory locations.
●
Bilingual (English and Spanish) capabilities.
Important Information
This user’s guide provides important information on
the use and operation of your phone. Please read all
the information carefully prior to using the phone for
the best performance and to prevent any damage to
or misuse of the phone. Any unapproved changes or
modifications will void your warranty.
FCC Part 15 Class B Compliance
This device and its accessories comply with part 15 of
FCC rules. Operation is subject to the following two
conditions: (1) This device and its accessories may not
cause harmful interference, and (2) this device and its
accessories must accept any interference received,
including interference that causes undesired operation.
Technical Details
The UX210 is an all digital phone that operates on
both (Code Division Multiple Access CDMA)
frequencies: cellular services at 800 MHz and (Personal
Communication Services PCS) at 1.9 Ghz. Also, the
UX210 works on Advanced Mobile Phone Service. We
call it a tri-mode phone. Since the phone operates on
Cellular, PCS and AMPS, the call fail rate is less than on
a conventional dual-mode or singlemode phone.
WELCOME
9
UX210_Eng.qxd 6/22/06 3:26 PM Page 9
10
WELCOME
WELCOME
CDMA Standard
Basic Air
Interface
TIA/EIA-95A
TSB-74
ANSI J-STD-008
TIA/EIA-IS2000
ANSI TIA/EIA 553A
CDMA Dual-Mode Air Interface
14.4kbps radio link protocol and
inter-band operations
IS-95 adapted for PCS frequency
band cdma2000 1xRTT AirInterface
Advanced Mobile Phone Service
MAS-BS
PCSC-RS
Intersystem operations
Nom-signaling data comm.
Cellular base station
Cellular mobile station
PCS personal station
PCS base station
Speech CODEC
TIA/EIA/IS-634
TIA/EIA/IS/651
TIA/EIA/IS-41-C
TIA/EIA/IS-124
TIA/EIA/IS-97
TIA/EIA/IS-98
ANSI J-STD-018
ANSI J-STD-019
TIA/EIA/IS-125
TIA/EIA/IS-96-B
TIA/EIA/IS-99
TIA/EIA/IS-637
TIA/EIA/IS-657
IS-801
TIA/EIA/IS-707-A
Speech CODEC
Async Data and Fax
Short message service
Packet Data
Position Determination
Service (gpsOne)
High Speed Packet Data
Network
Service
Performance
Designator Description
CDMA technology uses a feature called DSSS
(Direct Sequence Spread Spectrum) that enables
the phone to keep communication from being
crossed and to use one frequency channel by
multiple users in the same specific area. This
results in a 10-fold capacity increase when
compared with analog mode. In addition, features
such as soft / softer handoff, hard Handoff, and
dynamic RF power control technologies combine
to reduce call interruptions.
The Cellular and PCS CDMA networks consist
of MSO (Mobile Switching Office), BSC (Base
Station Controller), BTS (Base Station
Transmission System), and MS (Mobile Station).
* TSB-74: Protocol between an IS-95A system
and ANSI J-STD-008
1xRTT system receives twice as many
subscribers in the wireless section as IS-95. Its
battery life is twice as long as IS-95. High-
speed data transmission is also possible.
The following table lists some major CDMA
standards.
UX210_Eng.qxd 6/22/06 3:26 PM Page 10
WELCOME
FCC RF Exposure Information
WARNING! Read this information before operating
the phone.
In August 1996, the Federal Communications
Commission (FCC) of the United States, with its action in
Report and Order FCC 96-326, adopted an updated
safety standard for human exposure to Radio Frequency
(RF) electromagnetic energy emitted by FCC regulated
transmitters. Those guidelines are consistent with the
safety standard previously set by both U.S. and
international standards bodies.
The design of this phone complies with the FCC
guidelines and these international standards.
Bodily Contact During Operation
This device was tested for typical use with the back
of the phone kept 0.6 inches (1.5 cm) from the
body. To comply with FCC RF exposure requirements,
a minimum separation distance of 0.6 inches (1.5 cm)
must be maintained between the user’s body and the
back of the phone, including the antenna, whether
extended or retracted. Third-party belt-clips, holsters,
and similar accessories containing metallic
components should not be used. Avoid the use of
accessories that cannot maintain 0.6 inches (1.5 cm)
distance between the user’s body and the back of the
phone and have not been tested for compliance with
FCC RF exposure limits.
Vehicle-Mounted External Antenna
(Optional, if available.)
A minimum distance of 8 inches (20cm) must be
maintained between the user / bystander and the
vehicle-mounted external antenna to satisfy FCC RF
exposure requirements. For more information about
RF exposure, visit the FCC website at www.fcc.gov.
Caution
Use only the supplied and approved antenna. Use
of unauthorized antennas or modifications could
impair call quality, damage the phone, void your
warranty and/or result in violation of FCC
regulations.
Do not use the phone with a damaged antenna. If a
damaged antenna comes into contact with the skin
a minor burn may result. Contact your local dealer
for a replacement antenna.
11
UX210_Eng.qxd 6/22/06 3:26 PM Page 11
12
PHONE OVERVIEW
PHONE OVERVIEW
Earpiece
Outside Display
Charger port
Flip
LCD Screen
Left Soft Key
Speaker Key
Navigation Keys
Right Soft Key
SEND Key
Headset Jack
Side Keys
BACK Key
Voice Dial Key
Manner Mode Key
Alphanumeric Keypad
Lock Mode Key
Microphone
END/PWR Key
UX210_Eng.qxd 6/22/06 3:26 PM Page 12
PHONE OVERVIEW
13
Earpiece Lets you hear the caller.
Flip Open the case to answer an incoming call and
close to end the call.
LCD Screen Displays messages and indicator icons.
Speaker Key Use to set the Speaker Phone Mode.
Left Soft Key Use to display the function setting
menu.
Headset Jack
SEND Key Use to place or answer calls.
Side Keys Use to adjust the ringer volume in standby
mode and the earpiece volume during a call.
BACK Key Press to delete a single space or character.
Press and hold to delete entire words. Press this key
once in a menu to go back one level.
Manner Mode Key Use to set the Manner Mode
(from standby mode press and hold for about
3 seconds).
Navigation Keys Use for quick access to Messages,
My Speaker on, Axcess Apps. and Mobile Web.
Right Soft Key Use to select an action within a
menu.
Voice Dial Key Use for access to Voice Dial and Voice
Memo.
END/PWR Key Use to turn the power on/off and to
end a call. Also use to return to the main menu
display screen.
Alphanumeric Keypad Use to enter numbers and
characters and select menu items.
Lock Mode Key Use in standby mode to set the lock
function by pressing and holding the key for
about 3 seconds).
Microphone Allows you to speak to the caller.
Outside Display
Charger port Connects the charger to the phone.
UX210_Eng.qxd 6/22/06 3:26 PM Page 13
14
MENUS OVERVIEW
MENUS OVERVIEW
1. Contacts
1. List Contacts
2. New Number
3. New E-mail
4. Groups
5. Speed Dials
6. Voice Dials
7. My Contact Info
2. Recent Calls
1. Dialed Calls
2. Received Calls
3. Missed Calls
4. Erase Calls
1. Dialed Calls
2. Received Calls
3. Missed Calls
4. All Calls
5. Call Timer
1. Last Call
2. Home Calls
3. Roam Calls
4. All Calls
6. KB Counter
1. Received
2. Transmitted
3. Total
3. Messages
1. Voice Mail
2. New Message
3. Inbox
4. Outbox
5. Saved
6. Msg Settings
1. Auto Save
2. Auto Erase
3. Text-Callback #
4. Voice Mailbox #
5. Text-Signature
6. Text-Auto View
7. Entry Mode
8. Quick-Text
9. Text-Auto Play
7. Erase All
1. Inbox
2. Outbox
3. Saved
4. All
4. Voice
1. Voice Dial Prompt
2. Train Words
5. easyedge
SM
1. easyedge
SM
2. Help
6. Media
1. Images
2. Sounds
3. Melody Composer
1. Compose Melody
2. Melody Album
3. Metronome
UX210_Eng.qxd 6/22/06 3:26 PM Page 14
MENUS OVERVIEW
15
7. Tools
1. Schedule
2. Alarm Clock
1. Alarm 1
2. Alarm 2
3. Alarm 3
4. Quick Alarm
3. Voice Memo
4. My Shortcut
5. Notepad
6. Ez Tip Calc
7. Calculator
8.
World Clock
9.
Unit Converter
8. Settings
1. Sounds
1. Ringers
2. Key Tone
3. Volume
4. Message Alerts
5. Service Alerts
6. Power On/Off Tone
7. DTMF Length
2. Display
1. Banner
2. Backlight
3. Screens
4. Menu Style
5. Clocks
6. Theme Colors
7. Contrast
8. Fonts
9. Language
0. Power Saver
3. System
1. Select System
2. Set NAM
3. Auto NAM
4. Serving System
4. Security
1. Lock Phone
2. Restrict Calls
3. Emergency #s
4. Change Lock
5. Erase Contacts
6. Reset Default
5. Call Setup
1. Auto Retry
2. Answer Call
3. Auto-Answer
4. One-Touch Dial
5. Voice Privacy
6. Auto Volume
7. TTY Mode
8. Airplane Mode
6. Data Settings
1. PC Connection
7. Location
9. Phone Info
1. My Phone Number
2. S/W Version
3. Icon Glossary
4. Shortcut Help
Some content in this user guide may differ from your phone depending on the phone software or your service provider.
Features and specifications are subject to change without prior notice.
UX210_Eng.qxd 6/22/06 3:26 PM Page 15
16
GETTING STARTED WITH YOUR PHONE
GETTING STARTED WITH YOUR PHONE
The Battery
The phone comes with a rechargeable battery. Keep
it charged even while you’re not using it so it’s ready
when you need it.
Installing the Battery
Insert the bottom of the battery into the opening on the
back of the phone, then push the battery down until the
latch clicks. Align the battery cover over the battery then
slide it slightly upward until it clicks into place.
Removing the Battery
Turn the phone off. Slide the battery cover downward
and remove it. Use the half-moon opening near the
top of the battery to lift the battery out.
Charging the Battery
To use the charger provided with your phone:
Warning! Use only the charger provided with the
phone. Using any charger other than the one included
with the UX210 may damage your phone or battery.
1. Plug the end of the adapter into the phone’s
charger port and the other end into an electrical
outlet.
2. The charge time varies depending upon the
battery level.
Battery Charge Level
You can find the battery charge level at the top right
of the LCD screen. When the charge level becomes
low, the battery sensor sounds a warning tone, blinks
the battery icon, and displays LOW BATTERY
WARNING!. As the charge level approaches empty,
the phone automatically switches off and anything
you’re doing is not saved.
EmptyFully Charged
Note
It’s important to fully charge the battery before
using the phone for the first time.
Note
Battery life and signal strength are significant
factors (among others) that affect your phone’s
ability to send/receive calls.
UX210_Eng.qxd 6/22/06 3:26 PM Page 16
17
GETTING STARTED WITH YOUR PHONE
Turning the Phone On and Off
Turning the Phone On
1. Install a charged battery or connect the phone to
an external power source such as a cigarette lighter
charger or hands-free car kit.
2. Press until the LCD screen lights up.
Turning the Phone Off
1. Press and hold until the display turns off.
Signal Strength
Call quality depends on the signal strength in your
area. The signal strength is indicated on the screen
as the number of bars next to the signal strength
icon: The more bars, the better the signal strength. If
the signal quality is poor, move to an open area. If
you are in a building, the reception may be better
near a window.
Note
Like any other radio device, avoid contact with
the antenna while your phone is on.
UX210_Eng.qxd 6/22/06 3:26 PM Page 17
18
Screen Icons
When the phone is on, the top line of the LCD screen displays phone status icons. To see the icon glossary, go
to
Menu
->
Phone Info
->
Icon Glossary
on your phone.
GETTING STARTED WITH YOUR PHONE
GETTING STARTED WITH YOUR PHONE
Battery strength indicator. Indicates battery charge level.
In call state indicator. A call is in progress. * No icon indicates the phone is in standby mode.
No service indicator. The phone is not receiving a system signal.
New text msgs.
New voice mails.
New text & voice
Manner Mode.
Silence all.
Alarm.
Roaming.
IS-2000.
Digital.
Signal strength indicator. The strength of the signal received by the phone is indicated by the number of bars
displayed.
Speaker On.
Data Session.
E911 only.
Location on.
TTY.
Voice privacy.
Analog.
Airplane Mode.
OFF
UX210_Eng.qxd 6/22/06 3:48 PM Page 18
19
GETTING STARTED WITH YOUR PHONE
Making Calls
1. Make sure the phone is turned on. If not, press
for about three seconds. If necessary, enter
the lock code.
2. Enter the phone number.
3. Press .
4. Press to end the call.
Correcting Dialing Mistakes
If you make a mistake while dialing a number, press
once to erase the last digit entered, or hold
down for at least 2 seconds to go to the stand
mode.
Redialing Calls
1. Press twice to redial the last call.
Receiving Calls
1. To answer a call, open the flip or press .
2. Press twice to end the call.
Note
If you press Left Soft Key [
QQuuiieett
] while the
phone is ringing, the ringing or vibration is muted
for that call.
Note
If you press Right Soft Key [
IIggnnoorree
] while
the phone is ringing, the call will end.
Note
The first time you press your phone lists a
history of the last 90 phone calls. You can select
any of these to redial.
UX210_Eng.qxd 6/22/06 3:27 PM Page 19
20
QUICK ACCESS TO CONVENIENT FEATURES
QUICK ACCESS TO CONVENIENT FEATURES
Manner Mode
Sets the phone to shake instead of ring ( is
displayed). To quickly set Manner Mode press and
hold . To return to Normal Mode, press and
hold .
Lock Mode
Sets your phone to require your 4-digit password in
order to use the phone.
To quickly lock your phone press for three
seconds. To cancel, press Right Soft Key [
UUnnlloocckk
]
and enter the password.
Mute Function
The Mute Function prevents the transmittal of your voice
to the caller. To quickly activate Mute press Left Soft Key
[
MMuuttee
], then to cancel press Left Soft Key
[
UUnnmmuuttee
].
Volume Quick Adjustment
Quickly adjust ringer and earpiece volumes by
pressing the upper side key to increase and lower key
to decrease.
Note
The earpiece volume can only be adjusted during
a call and Key Beep volume can only be adjusted
through the Menu.
Note
Until you change it, the lock code/password is
the last 4 digits of your phone number.
UX210_Eng.qxd 6/22/06 3:27 PM Page 20
21
QUICK ACCESS TO CONVENIENT FEATURES
Call Waiting
During a call, one beep indicates another incoming
call. Check with your service provider for information
about this function. Press to receive the waiting
call then press again to switch between calls.
Caller ID
Caller ID displays the phone number or name of the
incoming call. If the caller’s identity is stored in Contacts,
the name appears with the number. Check with your
service provider to ensure they offer this feature.
Speed Dialing
Speed Dialing allows you to make phone calls quickly
and easily with a few key presses. Speed Dial number
1 is set to call your Voicemail.
To dial Speed Dials
For Speed Dials 1 to 9 press and hold the Speed Dial
number.
For Speed Dials 10 to 99 press the first digit, then
press and hold the key of the last digit.
Note
Another way to Speed Dial is to enter the speed
dial number(s), then press .
UX210_Eng.qxd 6/22/06 3:27 PM Page 21
22
ENTERING AND EDITING INFORMATION
ENTERING AND EDITING INFORMATION
Text Input
The following key functions are available to help with
text entry:
Key Functions
LLeefftt SSoofftt KKeeyy
: Press to change text input
mode.
SShhiifftt
: Press to change case (initial cap, caps
lock, lowercase).
NNeexxtt
: Press to display other matching words
in the database.
SSppaaccee
: Press to complete a word and insert a
space.
CClleeaarr
: Press to delete a single space or
character. Hold to delete words.
Punctuation : Press to insert punctuation.
Text Input Modes
In a text field, press Left Soft Key to display text
modes.
T9Word (T9) Mode
Type text pressing one key per letter. Combinations are
translated into common words using the letters on each
key and a compressed database.
1. Press Left Soft Key to change to [
TT99WWoorrdd
]
mode.
2. Press .
3. Press to complete the word and add a space.
4. Press
.
Call the office is displayed.
Using the NEXT Key
After you have finished entering a word, if the word
displayed is not the one you want, press to
display additional choices of words from the database.
UX210_Eng.qxd 6/22/06 3:27 PM Page 22
23
ENTERING AND EDITING INFORMATION
1. Press .
Good is displayed.
2. Press .
Additional choices are displayed such as: Home,
Gone, Hood, etc.
Abc (Multi-tap) Mode
Type text pressing keys multiple times for words not in
the phone’s database.
1. Press Left Soft Key to change to Abc mode.
2. Press to change to ABC Caps Lock every
time for capital letters.
3. Press .
LG is displayed.
123 (Numbers) Mode
Type numbers pressing each key only once.
1. Press Left Soft Key to change to 123 mode.
2. Press .
5 55 1212 is displayed.
Symbols Mode
Insert special characters into your text. Choose from
39 special characters including “SP” to insert a space
and “LF” to force text to the next line.
1. Press Left Soft Key to change to Symbols mode.
2. Press Right Soft Ke [
NNeexxtt
] to view next 12
symbols or Left Soft Key [
PPrreevv
] to view previous
12 .
3. Use to highlight the special character you
want to insert and press to select it.
4. Press Left Soft Key to change to another text
mode.
Changing Letter Case
Set capitalization before typing. Press to choose
Initial Cap (T9Word / Abc), Caps Lock (T9WORD /
ABC), and lowercase (T9word / abc).
UX210_Eng.qxd 6/22/06 3:27 PM Page 23
24
CONTACTS IN YOUR PHONE’S MEMORY
Contacts Entries
Store up to 300 entries with up to 5 phone numbers
each.
Storing Basics
1. Enter a number (max. 48 digits), then press Left
Soft Key [
SSaavvee
].
2. Use to select a Label and press .
Home / Home2 / Office / Office2 / Mobile /
Mobile2 / Pager / Fax / Fax2 / None
3. Use to select where to save, then press .
New Name / Existing
4. Enter a name (max. 22 characters), then press .
5. Press Left Soft Key [
DDoonnee
] to exit.
Customizing Individual Entries
1. Press Right Soft Key [
CCoonnttaaccttss
].
2. Use to select an entry, then press .
3. Press Left Soft Key [
EEddiitt
].
4. Use to select the information to customize.
5. Change the entry as you want, then press to
save your changes.
Email
Allows you to enter an email address to the Contact
entry.
Group
Allows you to organize your Contacts into groups.
Call Ringtone
Sets the phone to play a specific ringtone when the
Contact calls your phone.
Message Alert
Sets the phone to play a specific ringtone when a
message arrives.
CONTACTS IN YOUR
PHONE’S MEMORY
UX210_Eng.qxd 6/22/06 3:27 PM Page 24
Memo
Allows you to enter a memo for the contact (e.g.,
birthday, address, etc.) up to 64 characters.
Picture ID
Sets a picture to display to identify the caller when
they call your phone.
Speed Dial
Allows you to set up your Speed Dials.
1. Press Right Soft Key [
CCoonnttaaccttss
].
2. Use to select an entry, then press .
3. Press Left Soft Key [
EEddiitt
].
4. Press Right Soft Key [
OOppttiioonnss
].
5. Use to select Set Speed Dial, then press .
6. Enter a Speed Dial digit.
●
Use the keypad, then press .
●
Use to select the Speed Dial digit, then press
.
25
CONTACTS IN YOUR
PHONE’S MEMORY
Note
One-Touch Dial must be activated to use the
Speed Dials that you set up. Access Menu->
-> -> -> Enable.
Note
If you've saved more than one number in the
Contact entry, you have to use to highlight
the phone number first.
UX210_Eng.qxd 6/22/06 3:27 PM Page 25
Storing a Number with Pause
Pauses allow you to enter additional series of
numbers to access automated systems such as
Voicemail or credit billing numbers. Pause types are:
Hard Pause (P) The phone stops dialing until you
press Left Soft Key [Release] to send the next string
of digits. 2-sec Pause (T) The phone waits 2 seconds
before sending the next string of digits.
1. Enter the number, then press Right Soft Key
[
OOppttiioonnss
].
2. Use to select
HHaarrdd PPaauussee
/
22--sseecc PPaauussee
,
then press .
3. Enter additional number(s) (e.g., pin number,
credit card number, etc.).
4. Press Left Soft Key [
SSaavvee
] and continue
saving the Contact entry as needed.
Editing Contacts Entries
From Standby Mode
1. Enter a phone number, then press Left Soft Key
[
SSaavvee
].
2. Use to select Home / Home2 / Office /
Office2 / Mobile / Mobile2 / Pager / Fax / Fax2
/ None, then press .
3. Use to select Existing, then press .
4. Use to select an existing entry, then press .
5. Press to save.
From the Contact List Screen
1. Press Right Soft Key [
CCoonnttaaccttss
].
2. Select an entry, then press .
3. Press Left Soft Key [
EEddiitt
].
4. Use to select [
AAdddd NNuummbbeerr
], then press .
5. Enter the phone number and press , then
continue saving the entry as needed.
26
CONTACTS IN YOUR PHONE’S MEMORY
CONTACTS IN YOUR
PHONE’S MEMORY
UX210_Eng.qxd 6/22/06 3:27 PM Page 26
Adding a Pause to a Contact Entry
1. Press Right Soft Key [
CCoonnttaaccttss
].
2. Use to select a Contact entry and press ,
then press Left Soft Key [
EEddiitt
].
3. Use to select the number and press , then
press Right Soft Key [
PPaauussee
].
4. Press
HHaarrdd PPaauussee
or
22--sseecc PPaauussee
.
5. Enter additional number(s), then press .
6. Continue saving the Contact entry as needed.
Changing Saved Information
To change any information you stored, access the
Edit Entry screen:
1. Press Right Soft Key [
CCoonnttaaccttss
].
2. Use to select an entry and press , then
press Left Soft Key [
EEddiitt
].
3. Use to select the information you want to
change, then press .
4. Make the changes, then press .
27
CONTACTS IN YOUR
PHONE’S MEMORY
UX210_Eng.qxd 6/22/06 3:27 PM Page 27
28
CONTACTS IN YOUR PHONE’S MEMORY
CONTACTS IN YOUR
PHONE’S MEMORY
Changing the Default Number
The Default Number is the phone number you
entered when you created the Contact. Another
number can be saved as the Default Number.
1. Press Right Soft Key [
CCoonnttaaccttss
].
2. Use to highlight the Contact entry you want
to edit, then press .
3. Press Left Soft Key [
EEddiitt
].
4. Use to highlight the phone number you want to
set as the Default Number and press Right Soft
Key [
OOppttiioonnss
].
5. Press
SSeett aass DDeeffaauulltt ##
.
A confirmation message is displayed.
Deleting
Deleting a Phone Number
1. Select an entry to edit.
2. Use to select a phone number.
3. Press Right Soft Key [
OOppttiioonnss
].
4. Select
EErraassee NNuummbbeerr
.
A Confirmation message pops up.
5. Press to erase.
Note
If you try to delete the default number, an error
message will pop up.
Note
The Set as Default option only appears if the
Contact has at least two phone numbers and you
select any phone number other than the first one.
UX210_Eng.qxd 6/22/06 3:27 PM Page 28
29
CONTACTS IN YOUR
PHONE’S MEMORY
Deleting a Contact Entry
1. Select the entry from your Contacts.
2. Press Right Soft Key [
OOppttiioonnss
], then press
Erase.
3. A confirmation message is displayed. Press to
erase or to cancel and keep the Contact entry.
Deleting a Speed Dial
1. Select the entry from your Contacts, then press
Left Soft Key [
EEddiitt
].
2. Press Right Soft Key [
OOppttiioonnss
].
3. Press
RReemmoovvee SSppeeeedd DDiiaall
.
4. Press
RReemmoovvee
.
Searching Your Phone’s Memory
You can search for information you stored in your
UX210 phone. Scroll through your contents from A to
Z, or jump directly to a specific letter of the alphabet.
Scrolling Through Your Contacts
1. Press Right Soft Key [
CCoonnttaaccttss
].
Contacts list is displayed alphabetically.
2. Use to scroll through the list.
Searching by Letter
1. Press Right Soft Key [
CCoonnttaaccttss
].
Contacts list is displayed alphabetically.
2. Press (or press repeatedly) the key on the keypad
that corresponds with the search letter.
UX210_Eng.qxd 6/22/06 3:27 PM Page 29
30
CONTACTS IN YOUR PHONE’S MEMORY
CONTACTS IN YOUR
PHONE’S MEMORY
Calling From Your Phone’s Memory
Place calls quickly and easily to numbers stored in
your phone.
From Contacts
1. Press Right Soft Key [
CCoonnttaaccttss
].
2. Use to highlight the Contact entry.
3. Press to place the call.
From Recent Calls
1. Press Left Soft Key [
MMeennuu
].
2. Press
RReecceenntt CCaallllss
.
3. Use to select the type of recent call and
press .
Dialed Calls / Received Calls / Missed Calls
4. Use to highlight the one you want to call,
then press to dial it.
Note
When you press the Default Number is dialed.
If multiple numbers are saved in the entry, press
to view the Contact entry contents,highlight
the one you want to call and press .
UX210_Eng.qxd 6/22/06 3:27 PM Page 30
31
Speed Dialing
Allows you to make phone calls quickly and easily to
numbers stored in Contacts. You need to set Speed
Dials in your Contacts and enable One-Touch Dial
before using this feature.
Speed Dials From 1 to 9.
Press and hold the Speed Dial digit. Your phone
recalls the phone number from your Contacts,
displays it briefly, and then dials it.
Speed Dials From 10 to 99
Press the first Speed Dial digit, then press and hold
the key of the last Speed Dial digit.
CONTACTS IN YOUR
PHONE’S MEMORY
Note
Speed Dial 1 is for Voicemail.
Note
You can also enter the Speed Dial digit(s), then
press .
UX210_Eng.qxd 6/22/06 3:27 PM Page 31
Menu Access
Press Left Soft Key [
MMeennuu
] to access nine
phone menus. There are two methods of accessing
menus and submenus:
●
Use the navigation key to highlight and select, or
●
Press the number key that corresponds to the
menu (or submenu).
For example:
1. Press Left Soft Key [
MMeennuu
].
nine menus items are displayed.
Use to scroll through the list of menus.
2. Press the key of the menu item you want to select.
The sub-menu list is displayed.
3. Press the key of the sub-menu you want to access.
4. Use to highlight a setting and press to
select it.
Contacts
The Contacts Menu allows you to store names,
phone numbers and other information in your
phone’s memory. When you list your Contacts, the
number in parenthesis represents the number of
entries you have stored (up to 300).
Access and Options
1. Press Left Soft Key
[
MMeennuu
]
.
2. Press
CCoonnttaaccttss
.
3. Select a sub-menu.
1. List Contacts
2. New Number
3. New E-mail
4. Groups
5. Speed Dials
6. Voice Dials
7. My Contact Info
CONTACTS
32
CONTACTS
Note
Press to go back one step and cancel
without saving.
UX210_Eng.qxd 6/22/06 3:27 PM Page 32
33
CONTACTS
1. List Contacts
Allows you to view your Contacts list.
1. Press , , .
2. Options from here:
●
Press to scroll through your Contacts
alphabetically.
●
Press Right Soft Key
[
OOppttiioonnss
]
to select
one of the following:
Send Message / Find Name / Find Number /
Find Speed Dial / Find Group / Find E-mail /
Erase
●
Press Left Soft Key
[
NNeeww
]
to store a
New
Number
or
New E-mail
.
2. New Number
Allows you to add a new number as a new Contact
entry.
1. Press , , .
2. Enter the number, then press .
3. Select the Label you want and press .
4. Enter the name, then press .
5. Continue saving the entry as necessary.
Note
To save the number into an existing Contact,
edit the Contact entry instead.
UX210_Eng.qxd 6/22/06 3:27 PM Page 33
3. New E-mail
Allows you to save a new e-mail address as a new
Contact entry.
1. Press , , .
2. Enter the e-mail address, then press .
3. Enter the name, then press .
4. Continue saving the entry as necessary.
4. Groups
Allows you to view your grouped Contacts, add a new
group, change the name of a group, or delete a
whole group.
1. Press , , .
2. Options from here:
●
Use to highlight a group to view, then
press .
●
Press Left Soft Key
[
AAdddd
]
to add a new
group to the list.
●
Use to highlight a group, then press Right
Soft Key
[
OOppttiioonnss
]
to change the name
of the group or delete the group.
Edit Group / Erase Group
5. Speed Dials
Allows you to view your Speed Dials list, designate
new Speed Dials, or remove Speed Dial designations
entered in your Contacts.
1. Press , , .
CONTACTS
34
CONTACTS
Note
To save the e-mail into an existing Contact, edit
the Contact entry instead.
Note
Press Right Soft Key [
OOppttiioonnss
] to skip to
the next available Speed Dial, remove a Speed
Dial, or remove all Speed Dials.
UX210_Eng.qxd 6/22/06 3:27 PM Page 34
35
CONTACTS
2. Use to highlight the Speed Dial position, or
enter the Speed Dial digit and press .
3. Use to highlight the Contact and press .
4. Use to highlight the number and press .
6. Voice Dials
Allows you to add, view, or delete Voice Dial commands.
1. Press , , .
2. Options from here:
●
Press Left Soft Key [
NNeeww
] to record a new
Voice Dial command. Follow the phone’s prompts.
●
Use to highlight a Voice Dial and press
Right Soft Key [
OOppttiioonnss
] to choose one
of the following:
Play / Re-record / Erase / Erase All
7. My Contact Info
Allows you to view your contact information.
1. Press , , .
2. Use to select the feature you want to edit,
then press .
3. Edit the information as necessary.
Note
Recordings should be made in a normal use
position (speaker by your ear and microphone
near your mouth) while using a clear voice.
Hands-free car kits or headsets should be used if
the phone is primarily used with them.
UX210_Eng.qxd 6/22/06 3:27 PM Page 35
Recent Calls
The Recent Calls Menu is a list of the last phone
numbers or Contact entries for calls you placed,
accepted, or missed. It is continually updated as new
numbers are added to the beginning of the list and
the oldest entries are removed from the bottom of
the list.
●
indicates a dialed call.
●
indicates a received call.
●
indicates a missed call.
Access and Options
1. Press Left Soft Key
[
MMeennuu
]
.
2. Press
RReecceenntt CCaallllss
.
3. Select a sub-menu.
1. Dialed Calls
2. Received Calls
3. Missed Calls
4. Erase Calls
5. Call Timer
6. KB Counter
RECENT CALLS
36
RECENT CALLS
Note
To view a quick list of all your recent calls, press
from standby mode.
UX210_Eng.qxd 6/22/06 3:27 PM Page 36
37
RECENT CALLS
1. Dialed Calls
List of outgoing calls, up to 30.
1. Press , , .
2. Use to highlight an entry, then
●
Press to view the entry.
●
Press to call the number.
●
Press Right Soft Key [
OOppttiioonnss
] to select:
Save(Contact Info) / Send Msg / Prepend /
Erase / Erase All
2. Received Calls
List of incoming calls; up to 30.
1. Press , , .
2. Use to highlight an entry, then
●
Press to view the entry.
●
Press to call the number.
●
Press Right Soft Key [
OOppttiioonnss
] to select:
Save(Contact Info) / Send Msg / Prepend /
Erase / Erase All
3. Missed Calls
List of missed calls; up to 30.
1. Press , , .
2. Use to highlight an entry, then
●
Press to view the entry.
●
Press to call the number.
●
Press Right Soft Key [
OOppttiioonnss
] to select:
Save(Contact Info) / Send Msg / Prepend /
Erase / Erase All
UX210_Eng.qxd 6/22/06 3:27 PM Page 37
4. Erase Calls
Allows you to erase selected call list(s).
1. Press , , .
2. Use to highlight the list of calls to erase, then
press .
Dialed Calls / Received Calls / Missed Calls / All
Calls
3. Press
EErraassee
or
CCaanncceell
.
5. Call Timer
Allows you to view the duration of selected calls.
1. Press , , .
2. Use to highlight a call list, then press .
Last Call / Home Calls / Roam Calls / All Calls
6. KB Counter
Allows you to view the list of received and
transmitted data calls.
1. Press , , .
2. Use to highlight a data call list, then press
.
Received / Transmitted / Total
RECENT CALLS
38
RECENT CALLS
UX210_Eng.qxd 6/22/06 3:27 PM Page 38
MESSAGES
39
MESSAGES
Messages
Text messages, pages, and the voice mail box become
available as soon as the phone is powered on.
●
Check types of messages by pressing the message
key .
●
Make a call to the callback number by pressing
during an Inbox message check.
●
Read and edit messages saved in the outbox after
transmission and resend them.
Access and Options
1. Press Left Soft Key
[
MMeennuu
]
.
2. Press
MMeessssaaggeess
.
3. Select a sub-menu.
1. Voice Mail
2. New Message
3. Inbox
4. Outbox
5. Saved
6. Msg Settings
7. Erase All
The phone can store up to 115 messages (for
example, 50 inbox text messages, 50 outbox text
messages, 15 saved text messages). The UX210
supports up to 160 characters per message including
header information. The information stored in the
message is determined by phone mode and service
capability. Other limits to available characters per
message may exist. Please check with your service
provider for system features and capabilities.
New Message Alert
Your phone alerts you when it receives a new
message. You'll see New Message displayed in the
middle of the screen and the message icon ( ) on
the top line. You could also hear a message alert, if
you set one. Urgent message may be displayed if the
sender sent it as an urgent message.
UX210_Eng.qxd 6/22/06 3:27 PM Page 39
1. Voice Mail
Allows you to view new voice messages recorded in
the voice mail box. Your phone will alert you when
you receive a new voice message.
Checking Your Voice Mail Box
1. Press , , .
2. Options from here:
●
Press to listen to the message(s).
2. New Message
Allows you to send text messages, pages, and e-mail
transmissions. Each message has a destination
(Address 1) and information (Message). These are
dependent upon the type of message you want to
send.
Text Message Basics
1. Press , , .
2. Press to enter the destination address.
3. Enter the phone number where you want to send
the message/page or the e-mail address for an e-
mail message, then press .
4. Press to access the message screen.
5. Type your message (text or e-mail) then press .
6. Press Left Soft Key [
SSeenndd
].
A confirmation message is displayed.
MESSAGES
40
MESSAGES
Note
To send a page, press Left Soft Key [
SSeenndd
].
UX210_Eng.qxd 6/22/06 3:27 PM Page 40
Customizing the Text Message using options
1. Create a new message.
2. Press Right Soft Key [
OOppttiioonnss
].
3. Select the option(s) to customize.
Send
Sends the message.
Priority
Gives priority to the message.
Normal
/
Urgent
Text-Callback #
Inserts a pre-programmed
callback number with your
message.
On
/
Off
/
Edit
Delivery Notice
Informs you that the message
has been successfully
delivered to the recipient.
Enhanced
/
On
Save Message
Saves the message into the
saved folder.
4. Complete and send the message.
Using Contacts to Send a Text Message
You can designate an entry saved in your Contacts as
Address 1 instead of manually entering it.
1. Press , , .
2. Press Left Soft Key [
CCoonnttaaccttss
].
3. Select
Contacts
/
Recent Calls
/
Recent
Addresses
then press .
4. Use to highlight the Contact entry
containing the destination, then press .
5. Use to highlight the SMS phone number or
e-mail address, then press .
6. Complete the message as necessary.
41
MESSAGES
Note
You can enter up to 10 addresses for each
message.
UX210_Eng.qxd 6/22/06 3:27 PM Page 41
Text Options
Allows you stylize your text message, insert Quick
Text, and include Objects in your messages for that
personalized touch.
1. Use to highlight Message then press .
2. Select text input mode by pressing Left Soft Key
.
T9Word / Abc / 123 / Symbols / Smiley
3. Enter your message and use Right Soft Key if
necessary to add various effects to the text.
4. Press Right Soft Key [
OOppttiioonnss
].
5. Select the option(s) to customize.
Insert Quick-Text
Inserts 11 predefined phrases.
Yes / No / Call me. / Need
Directions / Where Are You?
/ Will Call Later / Busy / On
My Way / Will Arrive 15
Minutes / Thank You / Love
Yo u
Save Quick-Text
Allows you to define phrases
to insert as Insert Quick Text.
Insert Signature
Inserts a predefined signature.
6. Complete and send or save the message.
MESSAGES
42
MESSAGES
UX210_Eng.qxd 6/22/06 3:27 PM Page 42
3. Inbox
The phone alerts you in 2 ways when you receive a
new message:
●
By displaying a message notification.
●
By sounding an alert (a beep or other sound you
set) or vibrating.
Received text messages, pages, and e-mails are listed
from newest to oldest. You can scroll through them,
then select any of them to view message contents.
Out of Memory Warning
If the message [Inbox] is 100% full. Unable to rcv.
Please erase messages appears on your display,
you've filled up your allotted message memory and
your phone won't accept any new messages. You'll
have to delete some of your old messages to free up
some memory space.
Viewing Your Inbox
Your Inbox can store up to 50 received messages.
1. Press , , .
2. Use to highlight a message.
●
Left Soft Key [
RReeppllyy
].
●
Right Soft Key [
OOppttiioonnss
].
Erase
Deletes the selected message
from the Inbox.
Lock/Unlock
Locks or unlocks the message
to prevent or allow deletion.
3. Press to select the message.
4. Press Right Soft Key [
OOppttiioonnss
].
Reply w Copy
Replies to the SMS with the
original message attached.
Forward
Forwards a received message
to other destination
address(es).
Erase
Deletes the selected message
from the Inbox.
43
MESSAGES
Note
If you receive the same message twice, you'll only
see the most recent one and "Duplicate" appears
at the top of the message.
UX210_Eng.qxd 6/22/06 3:27 PM Page 43
Save Address
Stores the callback number, e-
mail address, and numbers in
user data included in the
received message into your
Contacts.
Save Quick-Text
Saves the message into the
Quick-Text list.
Save Message
Saves Inbox message into the
Saved Folder.
Lock/Unlock
Locks or unlocks the selected
message. Locked messages
can not be deleted by the
Erase Inbox or Erase All
functions.
4. Outbox
Your Outbox can store up to 50 sent messages. View
lists and contents of sent messages and verify
whether the transmission was successful or not.
1. Press , , .
2. Use to highlight a message.
●
Press Left Soft Key [
RReesseenndd
].
●
Press Right Soft Key [
OOppttiioonnss
].
Erase
Deletes the selected message.
Lock/Unlock
Locks or unlocks the message
to prevent or allow deletion.
3. Press to select the message.
4. Press Right Soft Key [
OOppttiioonnss
].
Send to
Allows you to send the
message to another address.
Erase
Deletes the selected message.
MESSAGES
44
MESSAGES
UX210_Eng.qxd 6/22/06 3:27 PM Page 44
Save Address
Stores the callback number, e-
mail address, and numbers in
user data included in the
received message into your
Contacts.
Save Quick-Text
Saves the message into the
Quick-Text list.
Save Message
Saves Outbox message into
the Saved Folder.
Lock/Unlock
Locks or unlocks the message
to prevent or allow deletion.
Message Info
Shows the message type
priority and status.
5. Saved
Displays saved messages and draft messages.
1. Press , , .
2. Use to highlight a message.
●
Press Left Soft Key [
RReessuummee
].
●
Press Right Soft Key [
OOppttiioonnss
].
Erase
Deletes the selected message.
Lock/Unlock
Locks or unlocks the message
to prevent or allow deletion.
45
MESSAGES
UX210_Eng.qxd 6/22/06 3:27 PM Page 45
6. Msg Settings
Allows you to configure nine settings for received
messages.
1. Press , , .
2. Use to highlight a setting and press to
select it.
Auto Save
Auto Save / Prompt / Do Not
Save
Auto Erase
On / Off
Text-Callback #
Voice Mailbox #
Edit Voicemail #.
Text-Signature
None / Custom
Text-Auto View
On / Off
Entry Mode
T9Word / Abc / 123
Quick-Text
You can use predefined phrases.
Text-Auto Play
On / Off
Message Settings Sub-Menu Descriptions
6.1 Auto Save
Designates whether or not to save a copy of sent
messages when transmitted.
6.2 Auto Erase
Designates whether or not to automatically delete
read, unlocked messages when the phone's memory
becomes full.
6.3 Text-Callback #
Allows you to manually enter the callback number.
6.4 Voice Mailbox #
Allows you to manually enter the access number for
Voice Mail Service if the VMS access number isn't
provided from the network.
6.5 Text-Signature
Allows you make/edit a signature to automatically
send with your messages.
MESSAGES
46
MESSAGES
UX210_Eng.qxd 6/22/06 3:27 PM Page 46
6.6 Text-Auto View
Sets the phone to automatically display the contents
of received messages instead of having to open the
message first.
6.7 Entry Mode
Allows you to select the default text input method.
6.8 Quick-Text
Allows you to change the pre-programmed quick text
phrases and even add your own to make sending
messages quick and easy.
6.9 Text-Auto Play
Sets the message to scroll automatically as you read
it.
7. Erase All
Allows you to erase every unlocked message all at
once or individually erase Inbox, Outbox, and Saved
messages.
1. Press , , .
●
Press
Inbox
to erase all Inbox messages.
●
Press
Outbox
to erase all Outbox
messages.
●
Press
Saved
to erase all saved draft
messages.
●
Press
All
to erase all messages stored in
the Inbox, Outbox, and Saved messages.
2. Press Erase
All
.
A confirmation message is displayed.
47
MESSAGES
UX210_Eng.qxd 6/22/06 3:27 PM Page 47
Voice
Provides access to the voice services available with
your phone.
Access and Options
1. Press Left Soft Key
[
MMeennuu
]
.
2. Press
VVooiiccee
.
3. Select a sub-menu.
1. Voice Dial Prompt
2. Train Words
1. Voice Dial Prompt
Allows you to set how you activate voice recognition.
1. Press , , .
2. Use to select a setting, then press .
Key press
Activates voice recognition when you
flip open the phone and press the
voice command key.
Flip open
Activates voice recognition whenever
you flip open the phone. (When the
phone is already open, you activate
voice recognition by pressing the
voice command key.)
Disable
2. Train Words
Optional personalization feature that helps your
phone recognize the way you pronounce commands.
If you do not get consistently good results with the
commands, perform this brief, one-time session.
1. Press , , .
2. Use to select a setting, then press .
Yes / No
3. Select Train / Un-train then press .
VOICE
48
VOICE
UX210_Eng.qxd 6/22/06 3:27 PM Page 48
eeaassyy
edge
SM
eeaassyy
edge
SM
allows you to do more than just talk on
your phone.
eeaassyy
edge
SM
is a technology and service
that allows you to download and use applications on
your phone. With
eeaassyy
edge
SM
, it is quick and easy to
personalize your phone to your lifestyle and tastes.
Just download the applications that appeal to you
including ringtones, games to productivity tools you
can find you can find something useful, practical, or
down right entertaining. There are new applications
constantly being created for your use.
DDoowwnnllooaaddiinngg AApppplliiccaattiioonnss
You can download applications and use
eeaassyy
edge
SM
where service is available.
IInnccoommiinngg CCaallllss
While downloading an application, incoming calls will
automatically be sent to your voice mail, if available.
If you do not have voice mail, downloading will not be
interrupted by an incoming call, and the caller will
receive a busy signal.
When using applications, an incoming call will
automatically pause the application and allow you to
answer the call. When you complete your call, you
can resume using the application.
Access and Options
1. Press Left Soft Key
[
MMeennuu
]
.
2. Press
eeaassyy
edge
SM
.
3. Select a sub-menu.
1.
eeaassyy
edge
SM
2. Help
easyedge
SM
49
ee aa ss yy
edge
SM
UX210_Eng.qxd 6/22/06 3:27 PM Page 49
1.
eeaassyy
edge
SM
Allows you to download selected applications while
displaying the entire application list retrieved from
the
eeaassyy
edge
SM
server connection.
1. Press , , .
2. Press .
2.
HHeellpp
Gives you information about the
eeaassyy
edge
SM
selection key.
1. Press , , .
2. Press .
MMaannaaggiinngg YYoouurr eeaassyy
edge
SM
AApppplliiccaattiioonnss
Add new applications and remove old ones at any
time.
RReemmoovviinngg AApppplliiccaattiioonnss
Only removing an application deletes it completely
from the memory of the phone. To restore an
application once it has been removed will require that
you pay and download it again.
1. Access
eeaassyy
edge
SM
.
2. Use to select Settings, then press .
3. Use to highlight Manage Apps, then press
.
4. Use to highlight the application to be
deleted, then press .
5. Use to select Remove, then press .
ee aa ss yy
edge
SM
50
ee aa ss yy
edge
SM
Short Cut
Pressing the right arrow key will start
ee aassyy
edge
SM
.
UX210_Eng.qxd 6/22/06 3:27 PM Page 50
Media
This menu allows you to use a wide variety of images,
sounds, and more.
Access and Options
1. Press Left Soft Key
[
MMeennuu
]
.
2. Press
MMeeddiiaa
.
3. Select a sub-menu.
1. Images
2. Sounds
3. Melody Composer
1. Images
Allows you to choose images to your phone to
display as the background image displayed on the
phone.
1. Press , , .
2. Use to highlight your selection, then press
Left Soft Key
[
SSeett AAss
]
to select.
2. Sounds
Allows you to choose the downloaded ring tones
heard for incoming calls.
1. Press , , .
2. Use to highlight your selection, then press
Left Soft Key
[
SSeett AAss
]
to select.
MEDIA
51
MEDIA
UX210_Eng.qxd 6/22/06 3:27 PM Page 51
3. Melody Composer
1. Press , , .
3.1 Compose Melody
Allows you to compose melodies in either Keyboard
Mode or Score Mode. Press Right Soft Key to
control the following options:
Save / Play / To Score Mode / To Keyboard Mode /
Melody Style / Instrument / Rhythm / Tempo /
Insert a note / Reset / Help
3.2 Melody Album
Lists the melodies you created and saved in Compose
Melody. Right Soft Key [
OOppttiioonnss
] allows you to
manage your melodies.
3.3 Metronome
Allows you to display an on-screen metronome and
set it to slow, fast, or normal.
MEDIA
52
MEDIA
Note
The Help option provides you with special key
functions you can use while you are composing
melodies.
Note
You can set melodies you created and saved in
the Melody Album as the ringtone for Contacts,
Caller ID, No Caller ID, or Restricted Calls.
UX210_Eng.qxd 6/22/06 3:27 PM Page 52
Tools
Your phone tools include a Schedule, Alarm Clock,
Voice Memo, My Shortcut, Notepad, Ez Tip Calc,
Calculator, World Clock, and Unit Converter.
Access and Options
1. Press Left Soft Key
[
MMeennuu
]
.
2. Press
TToooollss
.
3. Select a sub-menu.
1. Schedule
2. Alarm Clock
3. Voice Memo
4. My Shortcut
5. Notepad
6. Ez Tip Calc
7. Calculator
8. World Clock
9. Unit Converter
1. Schedule
Allows you to conveniently keep and access your
agenda(s). Simply store your appointments and your
phone will alert you with a reminder of your
appointment.
1. Press , , .
2. Use to highlight the scheduled day.
Moves cursor to the left.
Moves cursor to the right.
Moves to the previous week.
Moves to the next week.
3. Press Left Soft Key [
AAdddd
].
4. Enter your schedule information including:
●
Date
●
Time
●
Title/Information
●
Recurring event
●
When to ring the alarm reminder
●
Which ring alarm to sound
5. Press Left Soft Key [
SSaavvee
].
TOOLS
53
TOOLS
UX210_Eng.qxd 6/22/06 3:27 PM Page 53
2. Alarm Clock
Allows you to set one of four alarms. The current
time is displayed at the top of the screen when you
select an alarm to set. At the alarm time, Alarm 1 (or
2 or 3, as applicable) will be displayed on the LCD
screen and the alarm will sound.
1. Press , , .
2. Select the alarm you want to edit.
Alarm 1 / Alarm 2 / Alarm 3 /
Quick Alarm
3. Enter Alarm information including:
●
On/Off
●
Time to sound alarm
●
When to sound alarm
●
Ringtone to sound for alarm
4. Press Left Soft Key [
SSaavvee
].
3. Voice Memo
Allows you add, listen to, and erase short verbal
reminders.
1. Press , , .
2. Press Left Soft Key [
NNeeww
] to record a new
voice memo.
3. After the prompt, say your voice memo, then press
Left Soft Key [
DDoonnee
] to end the recording.
4. The Voice Memo title defaults to the date and
time of recording.
●
Press to view the selected Voice Memo
information and be able to listen to the recording.
●
Press Right Soft Key [
OOppttiioonnss
] for the
following:
Edit Title
Edits the title of the Voice Memo.
Memory Info
Shows the memory info used and left.
Set As
Contacts / Caller ID / No Caller ID /
Restrict
Erase
Deletes the selected Voice Memo.
Erase All
Deletes all of the Voice Memos.
TOOLS
54
TOOLS
Note
Scheduler will not alert you during a call or
during SMS transmitting. It will sound the
reminder after you exit a call.
UX210_Eng.qxd 6/22/06 3:27 PM Page 54
4. My Shortcut
Allows you to set a shortcut to phone menus using
the Right Navigation key.
1. Press , , .
An explanation message is displayed.
2. Select the shortcut, then press .
5. Notepad
Allows you to add, read, edit, and erase notes to
yourself.
1. Press , , .
2. Press Left Soft Key [
AAdddd
] to write a new note.
3. Use Right Soft Key to change the entry mode.
4. After writing in the note, press to save it.
6. Ez Tip Calc
Allows you to quickly and easily calculate bill amounts
using the bill total, tip, and number of people as variables.
1. Press , , .
55
TOOLS
UX210_Eng.qxd 6/22/06 3:27 PM Page 55
7. Calculator
Allows you to perform simple mathematical
calculations. You can enter numbers up to the fifth
decimal place. Calculations can be made with up to 3
lines at one time.
1. Press , , .
2. Enter the numbers for the value you want.
●
Press Left Soft Key [
AA CC
] to cancel the entry.
●
Press Right Soft Key [
OOppeerraattoorr
] to insert
parenthesis or power to your equation.
●
Press to insert a decimal.
●
Press to insert
±
.
3. Use the navigation key to enter +, -, x, /, = and
complete the equation.
8. World Clock
Allows you to determine the current time in another
time zone or country by navigating with the left or
right navigation keys.
1. Press , , .
9. Unit Converter
Allows you to measure Length, Area, Weight, Volume,
Temperature and Speed.
1. Press , , .
TOOLS
56
TOOLS
Note
Left Soft Key
SSeett DDSSTT
, sets the time to
daylight saving time.
UX210_Eng.qxd 6/22/06 3:27 PM Page 56
Settings
The Settings menu has options to customize your
phone.
Access and Options
1. Press Left Soft Key
[
MMeennuu
]
.
2. Press
SSeettttiinnggss
.
3. Select a sub-menu.
1. Sounds
2. Display
3. System
4. Security
5. Call Setup
6. Data Settings
7. Location
1. Sounds
Options to customize the phone’s sounds.
1.1 Ringers
Allows you to assign ring tones for incoming calls.
1. Press , , , .
2. Select
Caller ID
/
No Caller ID
/
Restricted Calls
.
3. Use to select a ringer, then press .
1.2 Key Tone
Allows you to select the Key Tone heard when you
press the keys.
1. Press , , , .
2. Select a tone style, then press .
Beep
A beep sounds.
English
Sends out a voice in English.
Spanish
Sends out a voice in Spanish.
SETTINGS
57
SETTINGS
UX210_Eng.qxd 6/22/06 3:27 PM Page 57
1.3 Volume
Allows you to set various volume settings.
1. Press , , , .
2. Select
Ringer
/
Earpiece
/
Key Beep
/
Speaker
Phone
.
3. Adjust the volume with then press to save
the setting.
1.4 Message Alerts
Allows you to select the alert type for a new message.
1. Press , , , .
2. Select
Voice Mail
/
Text Message
/
E-mail
/
Page
/
2-Min Reminder
.
3. Choose the setting you want, then press to
save the setting.
1.5 Service Alerts
Allows you to set any of the 5 Alert options to On or Off.
1. Press , , , .
2. Select an alert option and press .
3. Set On / Off with then press .
1.5.1 Service Change
Alerts you when service changes. The phone displays
Entering Service Area or Leaving Service Area message.
1.5.2 Minute Beep
Alerts you 10 seconds before the end of every
minute during a call.
1.5.3 Call Connect
Alerts you when the call is connected.
1.5.4 Back To Top
Alerts you when you scroll through the end of a
menu list.
SETTINGS
58
SETTINGS
UX210_Eng.qxd 6/22/06 3:27 PM Page 58
1.5.5 Charge Complete
Alerts you when charging is complete.
1.5.6 Accessory Input
Alerts you when an accessory is successfully attached.
1.6 Power On/Off Tone
Allows you to set the phone to sound a tone when
the phone is powered on and off.
1. Press , , , .
2. Use to set to
On
/
Off
, then press .
1.7 DTMF Length
Allows you to set the Key tone length and touch tone
playback speed.
1. Press , , , .
2. Select either of the following then press .
Normal
Sends out a tone for a fixed period of
time even if you keep the key pressed.
Long
Sends out a continuous tone for as long
as you keep the key pressed.
59
SETTINGS
Note
Dual-Tone Multi Frequency (DTMF) Signaling by
the simultaneous transmission of two tones, one
from a group of low frequencies and another
from a group of high frequencies. Each group of
frequencies consists of four frequencies. Setting
the Key Beep length to Long will extend the
DTMF tone.
UX210_Eng.qxd 6/22/06 3:27 PM Page 59
2. Display
Options to customize the phone’s display screen.
2.1 Banner
Allows you to enter a string of up to 16 characters
which display on the LCD screen.
1. Press , , , .
2. Enter your banner text, then press .
2.2 Backlight
Allows you to set the phone's illumination. You can
set how long the screen (Main LCD) is lit as well as
how bright and set how long the keys (Key Light
Timer) are lit.
1. Press , , , .
2. Choose a sub-menu.
Main LCD / Key Light Timer
3. Choose a setting and press .
Timer / Brightness
If an amount of time is set for the timer option, the
time starts after the last key was pressed.
2.2.1 Main LCD
Timer Options
7 seconds
15 seconds
30 seconds
Always On: Backlight is always on.
Always Off: Backlight is never on.
Brightness
Sets the brightness level of the backlight.
0% / 25% / 50% / 75% / 100%
SETTINGS
60
SETTINGS
Note
This setting will affect your battery. Backlight
uses more energy and will drain your battery
more quickly.
UX210_Eng.qxd 6/22/06 3:27 PM Page 60
2.2.2 Key Light Timer
7 seconds
15 seconds
Always On: Backlight is always on.
Always Off: Backlight is never on.
2.3 Screens
Allows you to choose the kind of background to be
displayed on the phone.
1. Press , , , .
2. Select
Wallpaper
/
Power On
/
Power Off,
then
press .
3. Select from different screens, then press .
4. Press Left Soft Key [
SSaavvee
] or .
2.4 Menu Style
Allows you to view the Menu as an Icon or List display.
1. Press , , , .
2. Select
Icon
or
List
and press .
2.5 Clocks
Allows you to choose the kind of clock to be
displayed on the LCD screen.
1. Press , , , .
2. Select Normal / Analog / Digital then press Left
Soft Key [
SSaavvee
].
2.6 Theme Colors
Allows you to choose the color of the background
screen.
1. Press , , , .
2. Select Default / Brilliant Blue / Gorgeous Green /
Purple Pleasure then press .
61
SETTINGS
UX210_Eng.qxd 6/22/06 3:27 PM Page 61
2.7 Contrast
Allows you to set the level of contrast for your LCD
screen.
1. Press , , , .
2. Select Main LCD / Front LCD, then press .
3. Use to adjust the level, then press .
2.8 Fonts
Allows you to set the size and color of the font.
1. Press , , , .
2.8.1 Calling Digits
1. Select Size / Color, then press .
2. Use to choose a setting, then press .
2.8.2 Text Editor
1. Select Size / Color, then press .
2. Use to choose a setting, then press .
2.8.3 Menu Font
1. Use to select Normal / Large, then press .
2.9 Language
Allows you to set the language your phone displays.
1. Press , , , .
2. Use to select
English
/
Spanish
, then press
.
2.0 Power Saver
When the phone is in an area without service, it
stops searching for service and enters Power Saver
Mode.
1. Press , , , .
2. Use to select a setting, then press .
2 minutes / 10 minutes / 30 minutes / Off
SETTINGS
62
SETTINGS
UX210_Eng.qxd 6/22/06 3:27 PM Page 62
3. System
The System menu allows you to designate specific
system network settings.
3.1 Select System
Allows you to set up the phone producer’s
management environment. Leave this setting as the
default unless you want to alter system selection as
instructed by your service provider.
1. Press , , , .
2. Select Home Only / Automatic A / Automatic B
then press .
3.2 Set NAM
Allows you to select the phone's NAM (Number
Assignment Module) if the phone is registered with
multiple service providers.
1. Press , , , .
2. Select NAM1/ NAM2 then press .
3.3 Auto NAM
Allows the phone to automatically switch between
programmed telephone numbers corresponding to
the service provider area.
1. Press , , , .
2. Select
On
/
Off
, then press .
3.4 Serving System
Identifies the channel number of a system that is
served as a SID Number. This information should only
be used for technical support.
1. Press , , , .
63
SETTINGS
UX210_Eng.qxd 6/22/06 3:27 PM Page 63
4. Security
The Security menu allows you to secure the phone
electronically.
4.1 Lock Phone
Keeps your phone from unauthorized use. Once the
phone is locked, it is in restricted mode until the lock
code is entered. You can receive phone calls and still
make emergency calls.
You can modify the lock code using the New Lock
code within the Security menu.
1. Press , , .
2. Enter the four-digit lock code.
The default lock code is commonly the last 4 digits of
your phone number.
3. Press
Lock Phone
.
4. Select an option then press .
Unlock
The phone is never locked
(Lock mode can be used).
Lock
The phone is always locked.
When locked, you can receive
incoming calls and make only
emergency calls.
On Power Up
The phone is locked when it is
turned on.
4.2 Restrict Calls
Allows you to restrict the calls that can be dialed
from your phone. Outgoing calls can only be placed
to emergency numbers or phone numbers saved in
your Contacts, but you will still be able to receive all
incoming calls.
1. Press , , .
2. Enter the four-digit lock code.
3. Press
Restrict Calls
.
4. Select On / Off then press .
SETTINGS
64
SETTINGS
UX210_Eng.qxd 6/22/06 3:27 PM Page 64
4.3 Emergency #s
Allows you to enter 3 emergency numbers. You can
call these emergency numbers and 911, even when
the phone is locked or restricted.
1. Press , , .
2. Enter the four-digit lock code.
3. Press
Emergency #s
.
4. Select emergency number then press .
5. Enter an emergency phone number, then press .
4.4 Change Lock
Allows you to enter a new four-digit lock code.
1. Press , , .
2. Enter the four-digit lock code.
3. Press
Change Lock
.
4. Enter a new 4-digit lock code.
5. Enter the same 4 digits to confirm your new lock
code.
4.5 Erase Contacts
Allows you to erase all of your Contacts at once.
1. Press , , .
2. Enter the four-digit lock code.
3. Press
Erase Contacts
.
4. Select
Erase all #s
then press .
4.6 Reset Default
Allows you to reset your phone to the factory default
settings.
1. Press , , .
2. Enter the four-digit lock code.
3. Press
Reset Default
.
4. Press , select Revert then press .
65
SETTINGS
UX210_Eng.qxd 6/22/06 3:27 PM Page 65
5. Call Setup
The Call Setup menu allows you to designate how the
phone handles both incoming and outgoing calls.
5.1 Auto Retry
Allows you to set the length of time the phone waits
before automatically redialing a number when the
attempted call fails.
1. Press , , , .
2. Select Off / Every 10 seconds / Every 30 seconds /
Every 60 seconds then press .
5.2 Answer Call
Allows you to determine how to handle an answered
call.
1. Press , , , .
2. Select Flip open / Any key / SEND only then
press .
5.3 Auto-Answer
Allows you to set the phone to automatically answer
calls when connected to a hands-free device.
1. Press , , , .
2. Select an option then press .
Off
After 5 seconds
When you have an incoming
call, the phone automatically
responds after 5 sec with the
flip either opened or closed.
SETTINGS
66
SETTINGS
Note
Auto Answer is an independent phone feature
that must be manually turned on/off when
connected or disconnected from a hands-free
device.
UX210_Eng.qxd 6/22/06 3:27 PM Page 66
5.4 One-Touch Dial
Allows you to initiate a speed dial call by pressing
and holding the speed dial digit. If set to Disable,
Speed Dial numbers designated in your Contacts will
not function.
1. Press , , , .
2. Select Enable / Disable then press .
5.5 Voice Privacy
Allows you to set the voice privacy feature for CDMA
calls as Enhanced or Standard. CDMA offers inherent
voice privacy. Check with your service provider for
availability.
1. Press , , , .
2. Select Enhanced / Standard then press .
5.6 Auto Volume
Provides a better audio experience by enabling the
Auto Volume feature to control the dynamic range
and volume of the sending and receiving voice across
different levels of speaker and environments.
1. Press , , , .
2. Select On / Off then press .
5.7 TTY Mode
Allows you to attach a TTY device enabling you to
communicate with parties also using a TTY device. A
phone with TTY support is able to translate typed
characters to voice. Voice can also be translated into
characters and then displayed on the TTY.
1. Press , , , .
An explanation message is displayed.
2. Press to continue.
3. Select TTY Full / TTY + Talk / TTY + Hear / TTY
Off then press .
67
SETTINGS
UX210_Eng.qxd 6/22/06 3:27 PM Page 67
TTY Full
Users who cannot talk and hear send
and receive a text message through
TTY equipment.
TTY + Talk
Users who can talk but cannot hear
receive a text message and send voice
through TTY equipment.
TTY + Hear
Users who can hear but cannot talk
send a text message and receive voice
through TTY equipment.
TTY Off
Normal users send and receive without
TTY equipment.
SETTINGS
68
SETTINGS
MMeennuu UUsseerr
FFeeaattuurree
TTrraannssmmiissssiioonn//
RReecceeiivviinngg
MMooddee
WWhheenn mmaakkiinngg
ccoommmmuunniiccaattiioonnss
wwiitthh aa nnoorrmmaall
tteerrmmiinnaall
TTY Full
For
hearing-
/verbally-
impaired
text message
transmission,
text message
receiving
operator required
TTY+Talk
For
hearing-
impaired
verbal
voice
transmission,
text message
receiving
operator required
TTY+Hear
For
verbally-
impaired
audible
text message
transmission,
voice receiving
operator required
TTY+Off
For
regular
users
voice
transmission,
voice receiving
UX210_Eng.qxd 6/22/06 3:27 PM Page 68
Connecting TTY Equipment and a Terminal
1. Connect a TTY cable to TTY connection on the
terminal. (TTY connection location the same as a
hands free earjack)
2. Enter the phone menu and set up the desired
TTY mode. (For a TTY mode, see the chart
above)
3. After setting a TTY mode, check the LCD screen
of the phone for the TTY icon.
4. Connect the TTY equipment to the power
source and turn it on.
5. Make a phone connection to the desired number.
6. When connection is made, use the TTY
equipment to type in and send a text message or
send voice.
7. The voice or text message from the receiver end
displays on the TTY equipment display.
5.8 Airplane Mode
Allows you to use the general application and
restricts the output of RF communication.
1. Press , , , .
2. Use to select a setting, then press .
On / Off
69
SETTINGS
UX210_Eng.qxd 6/22/06 3:27 PM Page 69
6. Data Settings
This menu allows you to use wireless data
communication services. Wireless data
communication services refers to the utilization of
subscriber terminals for access to the internet with
personal computers or laptops at 19.2 Kbps or at a
maximum of 230.4 Kbps. The connection speed
depends on your carrier’s network and other
variables. Check that communications information
specifications match the network.
6.1 PC Connection
Allows you to select the data port.
1. Press , , , .
2. Select USB/RS-232C (COM PORT) / Closed
then press .
7. Location
Menu for GPS (Global Positioning System: Satellite
assisted location information system) mode.
1. Press , , .
2. Use to select a setting, then press .
Location On
/
E911 Only
SETTINGS
70
SETTINGS
Note
GPS satellite signals are not always transmitted,
especially under bad atmospheric and
environmental conditions, indoors or otherwise.
Note
When using the 1X HSPD data service via an RS-
232C data cable, the port speed is set to
115,200 (230,400 is not supported). When
using the 1X HSPD data service via a USB data
cable, you may get better port speed if the port
speed is set to 230,400 rather than 115,200.
UX210_Eng.qxd 6/22/06 3:27 PM Page 70
Phone Info
The Phone Info menu provides you with specific
information pertaining to your phone model.
Access and Options
1. Press Left Soft Key
[
MMeennuu
]
.
2. Press
PPhhoonnee IInnffoo
.
3. Select a sub-menu.
1. My Phone Number
2. S/W Version
3. Icon Glossary
4. Shortcut Help
1. My Phone Number
Allows you to view your phone number.
1. Press , , .
2. S/W Version
Allows you to view the S/W, PRL, easyedge.
1. Press , , .
3. Icon Glossary
Allows you to view all the icons and their meanings.
1. Press , , .
4. Shortcut Help
Allows you to view condensed information about
using the phone.
1. Press , , .
71
SETTINGS
UX210_Eng.qxd 6/22/06 3:27 PM Page 71
TIA Safety Information
The following is the complete TIA Safety Information
for wireless handheld phones.
Exposure to Radio Frequency Signal
Your wireless handheld portable phone is a low power
radio transmitter and receiver. When ON, it receives
and sends out Radio Frequency (RF) signals.
In August, 1996, the Federal Communications
Commissions (FCC) adopted RF exposure guidelines
with safety levels for handheld wireless phones.
Those guidelines are consistent with the safety
standards previously set by both U.S. and
international standards bodies:
ANSI C95.1 (1992) *
NCRP Report 86 (1986)
ICNIRP (1996)
* American National Standards Institute; National
Council on Radiation Protection and Measurements;
International Commission on Non-Ionizing Radiation
Protection
Those standards were based on comprehensive and
periodic evaluations of the relevant scientific
literature. For example, over 120 scientists, engineers,
and physicians from universities, government health
agencies, and industry reviewed the available body of
research to develop the ANSI Standard (C95.1).
The design of your phone complies with the FCC
guidelines (and those standards).
Antenna Care
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the phone and may
violate FCC regulations.
Phone Operation
NORMAL POSITION: Hold the phone as you would
any other telephone with the antenna pointed up
and over your shoulder.
SAFETY
72
SAFETY
UX210_Eng.qxd 6/22/06 3:27 PM Page 72
Tips on Efficient Operation
For your phone to operate most efficiently:
Don’t touch the antenna unnecessarily when the
phone is in use. Contact with the antenna affects call
quality and may cause the phone to operate at a
higher power level than otherwise needed.
Driving
Check the laws and regulations on the use of wireless
phones in the areas where you drive and always obey
them. Also, if using your phone while driving, please
observe the following:
●
Give full attention to driving -- driving safely is
your first responsibility;
●
Use hands-free operation, if available;
●
Pull off the road and park before making or
answering a call if driving conditions or the law
require it.
Electronic Devices
Most modern electronic equipment is shielded from
RF signals. However, certain electronic equipment
may not be shielded against the RF signals from your
wireless phone.
Pacemakers
The Health Industry Manufacturers Association
recommends that a minimum separation of six (6)
inches be maintained between a handheld wireless
phone and a pacemaker to avoid potential
interference with the pacemaker. These
recommendations are consistent with the
independent research by and recommendations of
Wireless Technology Research.
Persons with pacemakers:
●
Should ALWAYS keep the phone more than six (6)
inches from their pacemaker when the phone is
turned ON;
●
Should not carry the phone in a breast pocket;
●
Should use the ear opposite the pacemaker to
minimize the potential for interference;
●
Should turn the phone OFF immediately if there is
any reason to suspect that interference is taking
place.
73
SAFETY
UX210_Eng.qxd 6/22/06 3:27 PM Page 73
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you
may want to consult your service provider (or call the
customer service line to discuss alternatives).
Other Medical Devices
If you use any other personal medical device, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information.
Health Care Facilities
Turn your phone OFF in health care facilities when
any regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may use
equipment that could be sensitive to external RF
energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should
also consult the manufacturer of any equipment that
has been added to your vehicle.
Posted Facilities
Turn your phone OFF in any facility where posted
notices so require.
Aircraft
FCC regulations prohibit using your phone while in
the air. Switch OFF your phone before boarding an
aircraft.
Blasting Areas
To avoid interfering with blasting operations, turn
your phone OFF when in a “blasting area” or in areas
posted: “Turn off two-way radio”. Obey all signs and
instructions.
SAFETY
74
SAFETY
UX210_Eng.qxd 6/22/06 3:27 PM Page 74
Potentially Explosive Atmosphere
Turn your phone OFF when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Areas with a potentially explosive atmosphere are
often, but not always marked clearly. Potential areas
may include: fueling areas (such as gasoline stations);
below deck on boats; fuel or chemical transfer or
storage facilities; vehicles using liquefied petroleum
gas (such as propane or butane); areas where the air
contains chemicals or particles (such as grain, dust,
or metal powders); and any other area where you
would normally be advised to turn off your vehicle
engine.
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place
objects, including either installed or portable wireless
equipment, in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment
is improperly installed and the air bag inflates, serious
injury could result.
Safety Information
Please read and observe the following information for
safe and proper use of your phone and to prevent
damage. Also, keep the user guide in an accessible
place at all times after reading it.
CCaauuttiioonn!!
VV
iioollaattiioonn ooff tthhee iinnssttrruuccttiioonnss mmaayy
ccaauussee mmiinnoorr oorr sseerriioouuss ddaammaaggee ttoo tthhee pprroodduucctt..
Charger and Adapter Safety
●
The charger and adapter are intended for indoor
use only.
●
Insert the battery pack charger vertically into the
wall power socket.
●
Use the correct adaptor for your phone when
using the battery pack charger abroad.
●
Only use the approved battery charger. Otherwise,
you may cause serious damage to your phone.
75
SAFETY
UX210_Eng.qxd 6/22/06 3:27 PM Page 75
Battery Information and Care
●
Please dispose of your battery properly or take it to
your local wireless carrier for recycling.
●
The battery doesn't need to be empty before recharging.
●
Use only LG-approved chargers specific to your phone
model since they are designed to maximize battery life.
●
Do not disassemble or short-circuit the battery.
●
Keep the battery’s metal contacts clean.
●
Replace the battery when it no longer provides
acceptable performance. The battery can be recharged
several hundred times before replacement.
●
Recharge the battery after long periods of non-use to
maximize battery life.
●
Battery life will vary due to usage patterns and
environmental conditions.
●
Use of extended backlighting, Browser, and data
connectivity kits affect battery life and talk/standby times.
●
The self-protection function of the battery cuts the
power of the phone when its operation is in an
abnormal state. In this case, remove the battery from
the phone, reinstall it, and turn the phone on.
Explosion, Shock, and Fire Hazards
●
Do not put your phone in a place subject to excessive
dust and keep the minimum required distance between
the power cord and heat sources.
●
Unplug the power cord prior to cleaning your phone,
and clean the power plug pin when it’s dirty.
●
When using the power plug, ensure that it’s firmly
connected. If not, it may cause excessive heat or fire.
●
If you put your phone in a pocket or bag without
covering the receptacle of the phone (power plug pin),
metallic articles (such as a coin, paperclip or pen) may
short-circuit the phone. Always cover the receptacle
when not in use.
●
Don’t short-circuit the battery. Metallic articles such as
a coin, paperclip or pen in your pocket or bag may
short-circuit the + and – terminals of the battery
(metal strips on the battery) upon moving. Short-
circuit of the terminal may damage the battery and
cause an explosion.
●
Do not disassemble or crush the battery. It may cause
a fire.
SAFETY
76
SAFETY
UX210_Eng.qxd 6/22/06 3:27 PM Page 76
General Notice
●
Using a damaged battery or placing a battery in your
mouth may cause serious injury.
●
Do not place items containing magnetic components
such as a credit card, phone card, bank book or
subway ticket near your phone. The magnetism of the
phone may damage the data stored in the magnetic
strip.
●
Talking on your phone for a long period of time may
reduce call quality due to heat generated during use.
●
When the phone is not used for a long period time,
store it in a safe place with the power cord unplugged.
●
Using the phone in proximity to receiving equipment
(i.e., TV or radio) may cause interference to the phone.
●
Do not use the phone if the antenna is damaged. If a
damaged antenna contacts skin, it may cause a slight
burn. Please contact an LG Authorized Service Center
to replace the damaged antenna.
●
Do not immerse your phone in water. If this happens,
turn it off immediately and remove the battery. If the
phone does not work, take it to an LG Authorized
Service Center.
●
Do not paint your phone.
●
The data saved in your phone might be deleted due to
careless use, repair of the phone, or upgrade of the
software. Please backup your important phone
numbers. The manufacturer is not liable for damage
due to the loss of data.
●
When you use the phone in public places, set the ring
tone to vibration so as not to disturb others.
●
Do not turn your phone on or off when putting it to
your ear.
●
Use accessories, such as earphones and headsets, with
caution. Ensure that cables are tucked away safely and
do not touch the antenna unnecessarily.
Avoid damage to your hearing
Damage to your hearing can occur if you are exposed to
loud sound for long periods of time. We therefore
recommend that you do not turn on or off the handset
close to your ear. We also recommend that call volumes
are set to a reasonable level.
77
SAFETY
UX210_Eng.qxd 6/22/06 3:27 PM Page 77
FDA Consumer Update
The U.S. Food and Drug Administration’s Center for
Devices and Radiological Health Consumer Update
on Mobile Phones:
1. Do wireless phones pose a health hazard?
The available scientific evidence does not show that
any health problems are associated with using
wireless phones. There is no proof, however, that
wireless phones are absolutely safe. Wireless phones
emit low levels of Radio Frequency (RF) energy in the
microwave range while being used. They also emit
very low levels of RF when in standby mode. Whereas
high levels of RF can produce health effects (by
heating tissue), exposure to low level RF that does
not produce heating effects causes no known adverse
health effects. Many studies of low level RF exposures
have not found any biological effects. Some studies
have suggested that some biological effects may
occur, but such findings have not been confirmed by
additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
2. What is the FDA's role concerning the safety of
wireless phones?
Under the law, the FDA does not review the safety of
radiation-emitting consumer products such as
wireless phones before they can be sold, as it does
with new drugs or medical devices. However, the
agency has authority to take action if wireless phones
are shown to emit Radio Frequency (RF) energy at a
level that is hazardous to the user. In such a case, the
FDA could require the manufacturers of wireless
phones to notify users of the health hazard and to
repair, replace, or recall the phones so that the
hazard no longer exists.
Although the existing scientific data do not justify
FDA regulatory actions, the FDA has urged the
wireless phone industry to take a number of steps,
including the following:
●
Support needed research into possible biological
effects of RF of the type emitted by wireless
phones;
●
Design wireless phones in a way that minimizes any
RF exposure to the user that is not necessary for
device function; and
SAFETY
78
SAFETY
UX210_Eng.qxd 6/22/06 3:27 PM Page 78
●
Cooperate in providing users of wireless phones
with the best possible information on possible
effects of wireless phone use on human health.
The FDA belongs to an interagency working group of
the federal agencies that have responsibility for
different aspects of RF safety to ensure coordinated
efforts at the federal level. The following agencies
belong to this working group:
●
National Institute for Occupational Safety and
Health
●
Environmental Protection Agency
●
Occupational Safety and Health Administration
●
National Telecommunications and Information
Administration
The National Institutes of Health participates in
some interagency working group activities, as well.
The FDA shares regulatory responsibilities for wireless
phones with the Federal Communications
Commission (FCC). All phones that are sold in the
United States must comply with FCC safety
guidelines that limit RF exposure. The FCC relies on
the FDA and other health agencies for safety
questions about wireless phones.
The FCC also regulates the base stations that the
wireless phone networks rely upon. While these base
stations operate at higher power than do the wireless
phones themselves, the RF exposures that people get
from these base stations are typically thousands of
times lower than those they can get from wireless
phones. Base stations are thus not the subject of the
safety questions discussed in this document.
3. What kinds of phones are the subject of this
update?
The term “wireless phone” refers here to handheld
wireless phones with built-in antennas, often called
“cell”, “mobile”, or “PCS” phones. These types of
wireless phones can expose the user to measurable
Radio Frequency (RF) energy because of the short
distance between the phone and the user’s head.
These RF exposures are limited by FCC safety
guidelines that were developed with the advice of the
FDA and other federal health and safety agencies.
When the phone is located at greater distances from
the user, the exposure to RF is drastically lower
because a person's RF exposure decreases rapidly
with increasing distance from the source. The so-
called “cordless phones,” which have a base unit
79
SAFETY
UX210_Eng.qxd 6/22/06 3:27 PM Page 79
connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus
produce RF exposures far below the FCC safety
limits.
4. What are the results of the research done
already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of Radio Frequency (RF)
energy exposures characteristic of wireless phones
have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies,
however, have suggested that low levels of RF could
accelerate the development of cancer in laboratory
animals. However, many of the studies that showed
increased tumor development used animals that had
been genetically engineered or treated with cancer-
causing chemicals so as to be pre-disposed to
develop cancer in the absence of RF exposure. Other
studies exposed the animals to RF for up to 22 hours
per day. These conditions are not similar to the
conditions under which people use wireless phones,
so we do not know with certainty what the results of
such studies mean for human health. Three large
epidemiology studies have been published since
December 2000. Between them, the studies
investigated any possible association between the
use of wireless phones and primary brain cancer,
glioma, meningioma, or acoustic neuroma, tumors of
the brain or salivary gland, leukemia, or other
cancers. None of the studies demonstrated the
existence of any harmful health effects from wireless
phone RF exposures. However, none of the studies
can answer questions about long-term exposures,
since the average period of phone use in these
studies was around three years.
5. What research is needed to decide whether RF
exposure from wireless phones poses a health risk?
A combination of laboratory studies and
epidemiological studies of people actually using
wireless phones would provide some of the data that
are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large
numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one
exists. Epidemiological studies can provide data that
is directly applicable to human populations, but ten
SAFETY
80
SAFETY
UX210_Eng.qxd 6/22/06 3:27 PM Page 80
or more years follow-up may be needed to provide
answers about some health effects, such as cancer.
This is because the interval between the time of
exposure to a cancer-causing agent and the time
tumors develop — if they do — may be many, many
years. The interpretation of epidemiological studies is
hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones.
Many factors affect this measurement, such as the
angle at which the phone is held, or which model of
phone is used.
6. What is the FDA doing to find out more about
the possible health effects of wireless phone RF?
The FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to Radio Frequency (RF) energy.
The FDA has been a leading participant in the World
Health Organization International Electro Magnetic
Fields (EMF) Project since its inception in 1996. An
influential result of this work has been the
development of a detailed agenda of research needs
that has driven the establishment of new research
programs around the world. The project has also
helped develop a series of public information
documents on EMF issues.
The FDA and the Cellular Telecommunications &
Internet Association (CTIA) have a formal
Cooperative Research And Development Agreement
(CRADA) to do research on wireless phone safety.
The FDA provides the scientific oversight, obtaining
input from experts in government, industry, and
academic organizations. CTIA-funded research is
conducted through contracts with independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone
users. The CRADA will also include a broad
assessment of additional research needs in the
context of the latest research developments around
the world.
81
SAFETY
UX210_Eng.qxd 6/22/06 3:27 PM Page 81
7. How can I find out how much Radio Frequency
energy exposure I can get by using my wireless
phone?
All phones sold in the United States must comply with
Federal Communications Commission (FCC)
guidelines that limit Radio Frequency (RF) energy
exposures. The FCC established these guidelines in
consultation with the FDA and the other federal
health and safety agencies. The FCC limit for RF
exposure from wireless phones is set at a Specific
Absorption Rate (SAR) of 1.6 watts per kilogram (1.6
W/kg). The FCC limit is consistent with the safety
standards developed by the Institute of Electrical and
Electronic Engineering (IEEE) and the National
Council on Radiation Protection and Measurement.
The exposure limit takes into consideration the body’s
ability to remove heat from the tissues that absorb
energy from the wireless phone and is set well below
levels known to have effects. Manufacturers of wireless
phones must report the RF exposure level for each
model of phone to the FCC. The FCC website
(
http://www.fcc.gov/oet/rfsafety) gives directions for
locating the FCC identification number on your phone
so you can find your phone’s RF exposure level in the
online listing.
8. What has the FDA done to measure the Radio
Frequency energy coming from wireless phones?
The Institute of Electrical and Electronic Engineers
(IEEE) is developing a technical standard for
measuring the Radio Frequency (RF) energy exposure
from wireless phones and other wireless handsets
with the participation and leadership of FDA
scientists and engineers. The standard,
“Recommended Practice for Determining the Spatial-
Peak Specific Absorption Rate (SAR) in the Human
Body Due to Wireless Communications Devices:
Experimental Techniques”, sets forth the first
consistent test methodology for measuring the rate
at which RF is deposited in the heads of wireless
phone users. The test method uses a tissue-
simulating model of the human head. Standardized
SAR test methodology is expected to greatly improve
the consistency of measurements made at different
laboratories on the same phone. SAR is the
measurement of the amount of energy absorbed in
tissue, either by the whole body or a small part of
the body. It is measured in watts/kg (or milliwatts/g)
of matter. This measurement is used to determine
whether a wireless phone complies with safety
guidelines.
SAFETY
82
SAFETY
UX210_Eng.qxd 6/22/06 3:27 PM Page 82
9. What steps can I take to reduce my exposure to
Radio Frequency energy from my wireless phone?
If there is a risk from these products — and at this
point we do not know that there is — it is probably
very small. But if you are concerned about avoiding
even potential risks, you can take a few simple steps
to minimize your exposure to Radio Frequency (RF)
energy. Since time is a key factor in how much
exposure a person receives, reducing the amount of
time spent using a wireless phone will reduce RF
exposure. If you must conduct extended
conversations by wireless phone every day, you could
place more distance between your body and the
source of the RF, since the exposure level drops off
dramatically with distance. For example, you could
use a headset and carry the wireless phone away
from your body or use a wireless phone connected to
a remote antenna. Again, the scientific data do not
demonstrate that wireless phones are harmful. But if
you are concerned about the RF exposure from these
products, you can use measures like those described
above to reduce your RF exposure from wireless
phone use.
10. What about children using wireless phones?
The scientific evidence does not show a danger to
users of wireless phones, including children and
teenagers. If you want to take steps to lower
exposure to Radio Frequency (RF) energy, the
measures described above would apply to children
and teenagers using wireless phones. Reducing the
time of wireless phone use and increasing the
distance between the user and the RF source will
reduce RF exposure.
Some groups sponsored by other national
governments have advised that children be
discouraged from using wireless phones at all. For
example, the government in the United Kingdom
distributed leaflets containing such a
recommendation in December 2000. They noted
that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their
recommendation to limit wireless phone use by
children was strictly precautionary; it was not based
on scientific evidence that any health hazard exists.
83
SAFETY
UX210_Eng.qxd 6/22/06 3:27 PM Page 83
11. What about wireless phone interference with
medical equipment?
Radio Frequency (RF) energy from wireless phones
can interact with some electronic devices. For this
reason, the FDA helped develop a detailed test
method to measure Electro Magnetic Interference
(EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test
method is now part of a standard sponsored by the
Association for the Advancement of Medical
Instrumentation (AAMI). The final draft, a joint effort
by the FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This
standard will allow manufacturers to ensure that
cardiac pacemakers and defibrillators are safe from
wireless phone EMI.
The FDA has tested hearing aids for interference from
handheld wireless phones and helped develop a
voluntary standard sponsored by the Institute of
Electrical and Electronic Engineers (IEEE). This
standard specifies test methods and performance
requirements for hearing aids and wireless phones so
that no interference occurs when a person uses a
“compatible” phone and a “compatible” hearing aid
at the same time. This standard was approved by the
IEEE in 2000.
The FDA continues to monitor the use of wireless
phones for possible interactions with other medical
devices. Should harmful interference be found to
occur, the FDA will conduct testing to assess the
interference and work to resolve the problem.
12. Where can I find additional information?
For additional information, please refer to the
following resources:
FDA web page on wireless phones
(http://www.fda.gov/cdrh/phones/index.html)
Federal Communications Commission (FCC) RF
Safety Program
(http://www.fcc.gov/oet/rfsafety)
International Commission on Non-lonizing Radiation
Protection
(http://www.icnirp.de)
World Health Organization (WHO) International EMF
Project
(http://www.who.int/emf)
National Radiological Protection Board (UK)
(http://www.nrpb.org.uk/)
SAFETY
84
SAFETY
UX210_Eng.qxd 6/22/06 3:27 PM Page 84
10 Driver Safety Tips
Your wireless phone gives you the powerful ability to
communicate by voice almost anywhere, anytime. An
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When operating a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, practice good common
sense and remember the following tips:
1. Get to know your wireless phone and its features
such as speed dial and redial. Carefully read your
instruction manual and learn to take advantage of
valuable features most phones offer, including
automatic redial and memory. Also, work to
memorize the phone keypad so you can use the
speed dial function without taking your attention
off the road.
2. When available, use a hands-free device. A number
of hands-free wireless phone accessories are
readily available today. Whether you choose an
installed mounted device for your wireless phone
or a speaker phone accessory, take advantage of
these devices if available to you.
3. Make sure you place your wireless phone within
easy reach and where you can reach it without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, if possible,
let your voicemail answer it for you.
4. Suspend conversations during hazardous driving
conditions or situations. Let the person you are
speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, and ice can
be hazardous, but so is heavy traffic. As a driver,
your first responsibility is to pay attention to the
road.
5. Don’t take notes or look up phone numbers while
driving. If you are reading an address book or
business card, or writing a “to-do” list while driving
a car, you are not watching where you are going. It
is common sense. Do not get caught in a
dangerous situation because you are reading or
writing and not paying attention to the road or
nearby vehicles.
85
SAFETY
UX210_Eng.qxd 6/22/06 3:27 PM Page 85
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan your calls before
you begin your trip or attempt to coincide your
calls with times you may be stopped at a stop
sign, red light, or otherwise stationary. But if you
need to dial while driving, follow this simple tip --
dial only a few numbers, check the road and your
mirrors, then continue.
7. Do not engage in stressful or emotional
conversations that may be distracting. Stressful or
emotional conversations and driving do not mix;
they are distracting and even dangerous when you
are behind the wheel of a car. Make people you
are talking with aware you are driving and if
necessary, suspend conversations which have the
potential to divert your attention from the road.
8. Use your wireless phone to call for help. Your
wireless phone is one of the greatest tools you can
own to protect yourself and your family in
dangerous situations -- with your phone at your
side, help is only three numbers away. Dial 911 or
other local emergency number in the case of fire,
traffic accident, road hazard, or medical
emergency. Remember, it’s a free call on your
wireless phone!
9. Use your wireless phone to help others in
emergencies. Your wireless phone provides you a
perfect opportunity to be a “Good Samaritan” in
your community. If you see an auto accident, crime
in progress or other serious emergency where lives
are in danger, call 911 or other local emergency
number, as you would want others to do for you.
10. Call roadside assistance or a special wireless non-
emergency assistance number when necessary.
Certain situations you encounter while driving
may require attention, but are not urgent enough
to merit a call for emergency services. But you
can still use your wireless phone to lend a hand.
If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured or a
vehicle you know to be stolen, call roadside
assistance or other special non-emergency
wireless number.
For more information, please call to 888-901-SAFE,
or visit our website www.wow-com.com.
SAFETY
86
SAFETY
UX210_Eng.qxd 6/22/06 3:27 PM Page 86
Consumer Information on SAR
(Specific Absorption Rate)
This model phone meets the government's
requirements for exposure to radio waves. Your
wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the
emission limits for exposure to Radio Frequency (RF)
energy set by the Federal Communications
Commission of the U.S. Government. These limits are
part of comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines are based on standards
that were developed by independent scientific
organizations through periodic and thorough
evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the
FCC is 1.6 W/kg. Tests for SAR are conducted using
standard operating positions specified by the FCC
with the phone transmitting at its highest certified
power level in all tested frequency bands. Although
SAR is determined at the highest certified power
level, the actual SAR level of the phone while
operating can be well below the maximum value.
Because the phone is designed to operate at multiple
power levels to use only the power required to reach
the network, in general, the closer you are to a
wireless base station antenna, the lower the power
output.
Before a phone model is available for sale to the
public, it must be tested and certified to the FCC
that it does not exceed the limit established by the
government-adopted requirement for safe exposure.
The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required
by the FCC for each model.
The highest SAR value for this model phone when
tested for use at the ear is 0.937 W/kg and when
worn on the body, as described in this user guide, is
0.562W/kg (body-worn measurements differ among
phone models, depending upon available accessories
and FCC requirements). While there may be
differences between SAR levels of various phones and
at various positions, they all meet the government
requirement for safe exposure.
87
SAFETY
UX210_Eng.qxd 6/22/06 3:27 PM Page 87
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF emission
guidelines. SAR information on this model phone is on
file with the FCC and can be found under the Display
Grant section of http://www.fcc.gov/oet/ fccid after
searching on FCC ID BEJVX3400.
Additional information on Specific Absorption Rates
(SAR) can be found on the Cellular Telecommunications
Industry Association (CTIA) website at
http://www.wow-com.com.
*
In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg
(W/kg) averaged over one gram of tissue. The
standard incorporates a substantial margin of safety
to give additional protection for the public and to
account for any variations in measurements.
SAFETY
88
SAFETY
UX210_Eng.qxd 6/22/06 3:27 PM Page 88
89
SAFETY
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications
Commission (FCC) Report and Order in WT Docket
01-309 modified the exception of wireless phones
under the Hearing Aid Compatibility Act of 1988
(HAC Act) to require digital wireless phones be
compatible with hearing-aids. The intent of the HAC
Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
While some wireless phones are used near some
hearing devices (hearing aids and cochlear implants),
users may detect a buzzing, humming, or whining
noise. Some hearing devices are more immune than
others to this interference noise, and phones also
vary in the amount of interference they generate.
The wireless telephone industry has developed a
rating system for wireless phones, to assist hearing
device users to find phones that may be compatible
with their hearing devices. Not all phones have been
rated. Phones that are rated have the rating on their
box or a label located on the box.
The ratings are not guarantees. Results will vary
depending on the user's hearing device and hearing
loss. If your hearing device happens to be vulnerable
to interference, you may not be able to use a rated
phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your
personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC
requirements and are likely to generate less
interference to hearing devices than phones that are
not labeled. M4 is the better/higher of the two
ratings.
Hearing devices may also be rated. Your hearing
device manufacturer or hearing health professional
may help you find this rating. Higher ratings mean
that the hearing device is relatively immune to
interference noise. The hearing aid and wireless
phone rating values are then added together. A sum
of 5 is considered acceptable for normal use. A sum
of 6 is considered for best use.
UX210_Eng.qxd 6/22/06 3:27 PM Page 89
In the above example, if a hearing aid meets the M2
level rating and the wireless phone meets the M3 level
rating, the sum of the two values equal M5. This
should provide the hearing aid user with “normal
usage” while using their hearing aid with the particular
wireless phone. “Normal usage” in this context is
defined as a signal quality that is acceptable for
normal operation.
The M mark is intended to be synonymous with the U
mark. The T mark is intended to be synonymous with
the UT mark. The M and T marks are recommended
by the Alliance for Telecommunications Industries
Solutions (ATIS). The U and UT marks are referenced
in Section 20.19 of the FCC Rules. The HAC rating
and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19
standard.
SAFETY
90
SAFETY
For information about hearing aids and digital
wireless phones
FCC Hearing Aid Compatibility and Volume
Control
http://www.fcc.gov/cgb/dro/hearing.html
Gallaudet University, RERC
http://tap.gallaudet.edu/DigWireless.KS/DigWirel
ess.htm
HLAA (Hearing Loss Association of America)
http://www.hearingloss.org/learn/cellphonetech.asp
The Hearing Aid Compatibility FCC Order
http://hraunfoss.fcc.gov/edocs_public/attachmatc
h/FCC-03-168A1.pdf
UX210_Eng.qxd 6/22/06 3:27 PM Page 90
ACCESSORIES
91
ACCESSORIES
Battery Charger
The battery charger allows you to
charge the battery.
Battery
Two batteries are available.
The standard battery, and the
extended battery.
Vehicle Power Charger
The vehicle power charger
allows you to operate the phone
and trickle charge the phone’s
battery from your vehicle.
Hands-Free Car Kit (Portable)
The hands-free car kit enables you to
attach the phone to the power jack in your
car, providing you with hands-free
operation.
Headset
The headset connects to your phone
allowing hands-free operation.
It includes earpiece, microphone.
USB Cable
Connects your phone to
your PC.
Battery Pack Charger
The battery pack charger allows you to
charge the battery pack itself without
the phone.
Holster
Equip a holster with the phone to make
it stable by attaching it to one place.
There are a variety of accessories available for your mobile phone. Consult your local dealer for availability.
Optional items are sold separately.
UX210_Eng.qxd 6/22/06 3:27 PM Page 91
1. WHAT THIS WARRANTY COVERS:
LG offers you a limited warranty that the enclosed
subscriber unit and its enclosed accessories will be
free from defects in material and workmanship,
according to the following terms and conditions:
(1) The limited warranty for the product extends for
TWELVE (12) MONTHS beginning on the date
of purchase of the product with valid proof of
purchase, or absent valid proof of purchase,
FIFTEEN (15) MONTHS from date of
manufacture as determined by the unit’s
manufacture date code.
(2) The limited warranty extends only to the original
purchaser of the product and is not assignable
or transferable to any subsequent purchaser/end
user.
(3) This warranty is good only to the original
purchaser of the product during the warranty
period as long as it is in the U.S, including
Alaska, Hawaii, U.S. Territories and Canada.
(4) The external housing and cosmetic parts shall be
free of defects at the time of shipment and,
therefore, shall not be covered under these
limited warranty terms.
(5) Upon request from LG, the consumer must
provide information to reasonably prove the date
of purchase.
(6) The customer shall bear the cost of shipping the
product to the Customer Service Department of
LG. LG shall bear the cost of shipping the
product back to the consumer after the
completion of service under this limited warranty.
LIMITED WARRANTY STATEMENT
92
LIMITED WARRANTY STATEMENT
UX210_Eng.qxd 6/22/06 3:27 PM Page 92
2. WHAT THIS WARRANTY DOES NOT COVER:
(1) Defects or damages resulting from use of the
product in other than its normal and customary
manner.
(2) Defects or damages from abnormal use,
abnormal conditions, improper storage,
exposure to moisture or dampness,
unauthorized modifications, unauthorized
connections, unauthorized repair, misuse,
neglect, abuse, accident, alteration, improper
installation, or other acts which are not the fault
of LG, including damage caused by shipping,
blown fuses, spills of food or liquid.
(3) Breakage or damage to antennas unless caused
directly by defects in material or workmanship.
(4) That the Customer Service Department at LG
was not notified by consumer of the alleged
defect or malfunction of the product during the
applicable limited warranty period.
(5) Products which have had the serial number
removed or made illegible.
(6) This limited warranty is in lieu of all other
warranties, express or implied either in fact or by
operations of law, statutory or otherwise,
including, but not limited to any implied warranty
of marketability or fitness for a particular use.
(7) Damage resulting from use of non-LG approved
accessories.
(8) All plastic surfaces and all other externally
exposed parts that are scratched or damaged
due to normal customer use.
(9) Products operated outside published maximum
ratings.
(10)Products used or obtained in a rental program.
(11) Consumables (such as fuses).
93
LIMITED WARRANTY STATEMENT
UX210_Eng.qxd 6/22/06 3:27 PM Page 93
3. STATE LAW RIGHTS:
No other express warranty is applicable to this
product. THE DURATION OF ANY IMPLIED
WARRANTIES, INCLUDING THE IMPLIED
WARRANTY OF MARKETABILITY, IS LIMITED TO
THE DURATION OF THE EXPRESS WARRANTY
HEREIN. LGE MOBILECOMM USA INC. SHALL NOT
BE LIABLE FOR THE LOSS OF THE USE OF THE
PRODUCT, INCONVENIENCE, LOSS OR ANY
OTHER DAMAGES, DIRECT OR CONSEQUENTIAL,
ARISING OUT OF THE USE OF, OR INABILITY TO
USE, THIS PRODUCT OR FOR ANY BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY,
INCLUDING THE IMPLIED WARRANTY OF
MARKETABILITY APPLICABLE TO THIS PRODUCT.
Some states do not allow the exclusive limitation of
incidental or consequential damages or limitations on
how long an implied warranty lasts; so these
limitations or exclusions may not apply to you. This
warranty gives you specific legal rights and you may
also have other rights which vary from state to state.
4. HOW TO GET WARRANTY SERVICE:
To obtain warranty service, please call or fax to the
following telephone numbers from anywhere in the
continental United States:
Tel. 1-800-793-8896 or Fax. 1-800-448-4026
Or visit http://us.lgservice.com. Correspondence may
also be mailed to:
LG Electronics Service- Mobile Handsets
P.O. Box 240007, Huntsville, AL 35824
DO NOT RETURN YOUR PRODUCT TO THE
ABOVE ADDRESS
. Please call or write for the
location of the LG authorized service center nearest
you and for the procedures for obtaining warranty
claims.
LIMITED WARRANTY STATEMENT
94
LIMITED WARRANTY STATEMENT
UX210_Eng.qxd 6/22/06 3:27 PM Page 94
95
INDEX
A
Accessory Input 59
Alarm Clock 54
Airplane Mode 69
Answer Call 66
Auto-Answer 66
Auto Retry 66
Auto Volume 67
B
Backlight 60
Battery 16
Battery Charge Level 16
C
Call Connect 58
Calculator 56
Call Timer 38
Charge Complete 59
Change Lock 65
Charging the Battery 16
Clocks 61
Contrast 62
Contacts 32
D
Data Settings 70
Dialed Calls 37
Display 60
Driving 73
DTMF Length 59
E
easyedge
SM
50
Electronic Devices 73
Entry Mode 47
Emergency #s 65
Erase All 47
Erase Calls 38
Erase Contacts 65
Ez Tip Calc 55
F
FCC Part 15 Class B
Compliance 9
FCC RF Exposure
Information 11
FDA Consumer Update 78
Fonts 62
G
Groups 34
I
Images 51
Important Information 9
IMPORTANT SAFETY
PRECAUTIONS 1
Inbox 43
Installing the Battery 16
K
Key Functions 22
KB Counter 38
L
Language 62
List Contacts 33
Location 70
Lock Phone 64
M
Melody Composer 52
Menu Style 61
Message Alerts 58
Messages 39
Minute Beep 58
Missed Calls 37
Msg Settings 46
My Contact Info 35
My Phone Number 71
My Shortcut 55
INDEX
INDEX
UX210_Eng.qxd 6/22/06 3:27 PM Page 95
N
New Number 33
New Message 40
Notepad 55
O
One-Touch Dial 67
Outbox 44
P
PC Connection 70
Phone Info 71
Phone Overview 12
R
Received Calls 37
Removing the Battery 16
Reset Default 65
Restrict Calls 64
Ringers 57
S
SAFETY 72
Saved 45
Schedule 53
Screens 61
Security 64
Select System 63
Service Alerts 58
Serving System 63
Settings 57
Shortcut Help 71
Sounds 57
S/W Version 71
System 63
T
Text-Auto Play 47
Text-Auto View 47
Text-Callback # 46
Text Input 22
Text-Signature 46
Theme Colors 61
Tools 53
Train Words 48
TTY Mode 67
Turning the Phone On and
Off 17
V
Voice Dials 35
Voice Dial Prompt 48
Voice Mail 40
Voice Memo 54
W
World Clock 56
INDEX
96
INDEX
UX210_Eng.qxd 6/22/06 3:27 PM Page 96
