Loading ...
Loading ...
Loading ...
14
AIR SHUTTER
ADJUSTMENT CUP
SET-SCREW
U-BURNER
1” MAXIMUM
3
/
8
” MAXIMUM
Figure # 4
FLAME SIZE
LOW HEAT SETTING ADJUSTMENT:
NOTE: THE LOW HEAT SETTING ON
YOUR GRILL IS PRESET AT
THE FACTORY.
ADJUST ONLY IF ALTITUDE
OR ENVIRONMENTAL FAC-
TORS ARE CAUSING POOR
LOW HEAT PERFORMANCE.
ADJUSTMENT STEPS:
1. Follow lighting instructions by setting the control
knob on “HI” and allow the burner to preheat for 10
minutes.
2. Turn the control knob to “LOW” and wait for the
burner temperature to drop and stabilize.
3. Attempting adjustment at any setting other than
LOW can create a dangerous condition.
4. Remove knob by pulling straight away from control
panel.
5. Insert a small blade screwdriver into the valve stem
to begin the adjustment.
6. Turn counter-clockwise to INCREASE the low heat
flame using pliers to hold the stem securely. (see
figure # 5)
7. Adjust the flames so the burner is fully lit around the
perimeter when the know is in the LOW position.
8. Once proper adjustment is reached, reattach the
knob by pushing onto stem.
WARNING
NEVER ADJUST THE BURNER SO LOW THAT IT MAY
GO OUT DURING USE. DO NOT OPERATE THE
GRILL WITH THE LOW HEAT SCREW REMOVED.
GAS CAN ESCAPE AND CAUSE A POTENTIALLY
HAZARDOUS CONDITION.
Figure # 5
Loading ...
Loading ...
Loading ...