Loading ...
Loading ...
Loading ...
6
Use & Care guide
LED LIGHT
The light system inside the fridge compartment uses LEDs
light, allowing a better lightning as
well as very low energy consumption.
If the LED light system does not work,
please contact the Service to replace
it.
Important: The refrigerator
compartment light switches on when
the refrigerator door is opened.
If the door is kept open for more than 8 minutes the light
will be automatically switched o.
6
TH
SENSE
This function automatically works to ensure the optimal
conditions to preserve the stored food. The “6
th
Sense”
function is automatically activated when:
• a large amount of food is loaded into the refrigerator
• the refrigerator door is left open for a long time
• a prolonged power failure takes place, causing the
internal temperature of the appliance to increase to
values that cannot guarantee safe storage of food.
FAST COOLING
The use of the Fast Cooling function is recommended
to increase the cooling capacity of the refrigerator
compartment when placing a very high quantity of food
within it.
To activate the Fast Cooling function, press and hold for 3
seconds the Temperature button on the control panel till all
the 3 LEDs will turn on.
The function is automatically deactivated after 24 hours and
return to previous selected set point.
!
!
!
The function can be manually deactivated by pressing and
holding for 3 seconds the Temperature button on the
control panel.
Note: Fast Cooling function should be also switched ON before
placing fresh food to be frozen in the freezer compartment, in
order to maximize the freezing capacity.
TEMPERATURE SETTING
Press the Temperature button on the control panel to
adjust the temperature from the warmest through the
lower to the coldest level. Pressing the Temperature button,
the temperature setting will change cyclically. At rst
plug-in of appliance temperature setpoint is present at
medium position (factory setting). Following table shows
temperature setpoints:
Led on Led o
High temp.
Med-high temp.
Medium temp.
Med-low temp.
Low temp.
Fast Cooling
Note: Displayed set points correspond to the average
temperature throughout the whole refrigerator.
FAN*
The Fan improves temperature distribution inside the
refrigerator compartment, allowing better preservation of
stored food. By default, the fan is switched on. To turn o
the fan press the button of fan. Please note that when the
fan is switched on it will not continuously work. The fan will
start/stop working depending on the temperature and/or
humidity level inside the fridge. It is therefore absolutely
normal if the fan does not move even if the fan is switched
on. If the appliance has the Fan it can be equipped with
the antibacterial lter. Remove it from the box placed
in the crisper drawer and insert into the fan cover. The
replacement procedure is included in the lter box.
ANTIBACTERIAL FILTER*
Remove it from the box placed in the Fruit and vegetable
drawer and insert into the cover of fan. The replacement
procedure is included in the lter box. Replace it every
6 months to ensure optimal protection inside your
refrigerator. Visit the website page or contact consumer
service to purchase the lter.
FREEZING FRESH FOOD
Place fresh food to be frozen on the shelf in the freezer
compartment, avoiding direct contact with food that is
already frozen. The quantity of fresh food that can be frozen
in 24 hours is written on the rating plate. To freeze fresh
food, place the freezer compartment shelf in the bottom
position.
CONTROL PANEL
1. Indicator Leds (to display the
current temperature setpoint or the
Fast Cooling function)
2. Fast Cooling Button/
Temperature Button
2
1
* Available only on certain models
Loading ...
Loading ...
Loading ...