Loading ...
Loading ...
Loading ...
119
MAINTENANCE
Replacing the Lamp
1 Turn off the projector, disconnect the power
plug from the AC outlet, and then let the pro-
jector stand for at least 1 hour.
2 Loosen a screw with a flathead screwdriver
and remove the lamp cover.
3 Loosen two screws, pull up the handle, and
then remove the lamp.
4 Fully insert a new lamp and secure it with two
screws.
* After the installation, be sure to push down
the handle.
5 Replace the lamp cover and tighten the
screw.
6 Turn on the projector.
7 Bring up the menu and select [System set-
tings] -> [Other settings] -> [Lamp counter]
(P114).
8 Select [Reset] -> [OK] to reset the lamp
counter.
Lamp cover
Screw
Screw
Lamp
Handle
Lamp cover
Loading ...
Loading ...
Loading ...