Loading ...
Loading ...
Loading ...
Icon Description
Faceplate Knobs
Touchscreen Buttons
Blower Control
Blower Control is used to regulate the amount of air forced through the climate system.
There are seven blower speeds available. Adjusting the blower will cause automatic
mode to switch to manual operation. The speeds can be selected using either the blower
control knob on the faceplate or the buttons on the touchscreen.
• Faceplate: The blower speed increases as you turn the blower control knob clockwise
from the lowest blower setting. The blower speed decreases as you turn the blower
control knob counterclockwise.
• Touchscreen: Use the small blower icon to reduce the blower setting and the large
blower icon to increase the blower setting. Blower can also be selected by pressing
the blower bar area between the icons.
Modes Button Modes Button
Push the button in the center of the Blower Control Knob to change the airflow distribu-
tion mode. You can also change the mode by pressing the desired mode on the touch-
screen. The airflow distribution mode can be adjusted so air comes from the instrument
panel outlets, floor outlets, defrost outlets and demist outlets. The Mode settings are as
follows:
Panel Mode
Panel Mode
Air comes from the outlets in the instrument panel. Each of these outlets can be indi-
vidually adjusted to direct the flow of air. The air vanes of the center outlets and out-
board outlets can be moved up and down or side to side to regulate airflow direction.
There is a shut off wheel located below the air vanes to shut off or adjust the amount of
airflow from these outlets.
76 GETTING TO KNOW YOUR VEHICLE
Loading ...
Loading ...
Loading ...