2008 CHRYSLER SEBRING CONVERTIBLE User Manual

Loading ...

To lock the doors:

Press and release the LOCK button on the transmitter to

lock both doors. The turn signal lights will flash and the

horn will chirp once to acknowledge the lock signal.

Sound Horn with Lock

This feature will cause the horn to chirp when the doors

are locked with the transmitter. This feature can be

turned on or off. To change the current setting, proceed as

follows:

•

For vehicles equipped with the Electronic Vehicle

Information Center (EVIC), refer to “Sound Horn with

Lock,” under “Personal Settings (Customer Program-

mable Features)” under “Electronic Vehicle Informa-

tion Center (EVIC)” in Section 4 of this manual for

details.

•

For vehicles not equipped with the EVIC, perform the

following steps:

1. Press the LOCK button on a programmed transmitter

for at least 4 seconds, but not longer than 10 seconds.

Then, press the PANIC button while still holding the

LOCK button.

2. Release both buttons at the same time.

3. Test the feature while outside of the vehicle, by

pressing the LOCK button on the transmitter with the

ignition in the LOCK position, and the key removed.

4. Repeat these steps if you want to return this feature to

its previous setting.

NOTE: Pressing the LOCK button on the transmitter

while you are in the vehicle will activate the Security

Alarm. Opening a door with the SecurityAlarm activated

will cause the alarm to sound. Press the UNLOCK button

to deactivate the Security Alarm.

24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Loading ...

User Manual - Page 24