Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have nished.
40
3.2 To Replace the Clock
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the control panel (see 1.1). Pull o the timer control
buttons.
Undo the timer xing screws and remove the timer/mounting
bracket assembly from the control panel.
Remove the timer from its mounting bracket by depressing
the plastic lugs on the timer case, and at the same time pulling
the unit forward.
Reassemble in reverse order. When replacing the leads, refer to
the wiring diagram. Check the operation of the timer.
3.3 To Change the Warmer Switch
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the right-hand hotplate tray (see 2.1). Disconnect the
wiring from the warmer switch. Remove the 2 screws holding
switch to mounting panel, taking care not to lose the switch
rotation limiter (Fig. 10.3). Fit the new switch and reassemble
in reverse order. Check for correct operation.
3.4 To Change the Ignition Generator
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Pull the cooker forwards to gain access to the cover box at
the rear of the cooker. Remove the screws securing the cover
and lift clear. Pull o all the leads to the generator noting their
positions. Slacken the 2 screws holding generator to cooker
and remove the generator.
Fit the new generator to the cooker and replace the leads.
Refer to the wiring diagram and reassemble in reverse order.
Check ignition performance.
4 Grill
4.1 To Replace the Grill Controller
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the control panel and hotplate (see 1.1 & 2.1).
Disconnect the wiring from controller. Remove the 2screws
holding the controller to the mounting panel.
Fit the new controller and reassemble in the reverse order.
Check for correct operation.
4.2 To Replace the Grill Element
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the grill pan from the grill chamber. From inside
the grill compartment, undo the 2 screws and washers and
remove the enamelled front shield from the grill roof. Remove
2 screws and washers securing the grill element front support.
Remove the screws from the grill elements.
Carefully lift the elements out and disconnect the leads from
the element terminals, noting their position.
If it is not possible to disconnect the leads in this way, pull
cooker forwards to gain access to the rear.
Fig. 10.3
Loading ...
Loading ...
Loading ...