Loading ...
Loading ...
Loading ...
14
ArtNo.306-0001 - 3-button clock
ArtNo.306-0001 - 3-button clock
ArtNo.306-0001 - 3-button clock
ArtNo.306-0001 - 3-button clock
ArtNo.306-0001 - 3-button clock
ArtNo.306-0001 - 3-button clock
TOP TIP
By pressing the mode [M] whilst Minute Minder is counting
down, it is possible to see time remaining or adjust the
countdown time using the [+] or [-] buttons.
Operating the Ovens
Operating the Multifunction Oven
The multifunction oven has two controls: a function selector
and a temperature setting knob (Fig.2.26).
Turn the function selector control to a cooking function. Turn
the oven temperature knob to the temperature required
(Fig.2.27).
The oven heating light will glow until the oven has reached
the temperature you selected (Fig.2.28). It will then cycle on
and o during cooking as the oven maintains the selected
temperature.
Operating the Fan Oven
Turn the oven knob to the desired temperature (Fig.2.27).
The oven indicator light will glow until the oven has reached
the temperature selected (Fig.2.28). It will then cycle on and
o during cooking.
Using the Clock
You can use the clock to turn the left-hand oven on and o.
Note: When using the timer functions, rst set the clock as
required before setting the oven temperature.
The oven can be switched on when the cook symbol [
] is
displayed.
Setting the Clock
1.
The LCD clock is shown in (Fig.2.29). Once the cooker is
connected and switched on, the display ashes (00
.
00 )
and the time starts from (00
.
00 ).
2. To set the clock press the [+] and [-] buttons
simultaneously, the point between hours and minutes
will start to ash for 5 seconds. Whilst the point is
ashing press either the [+] or [-] button to set the
correct time.
IMPORTANT: The timed oven will not operate unless the
clock has been set.
Program Selection - Setting the Minute Minder
The minute minder [ ] provides the ability to set a
countdown from 00
.
01h to 23
.
59h, at the end of which an
alarm will sound.
1. Press the mode [M] button once (Fig.2.30). The bell
symbol ( ) will ash on the display. Select the desired
countdown from 00
.
01h to 23
.
59h using the [+] button
(Fig.2.31). The countdown will automatically begin and
the ( ) symbol will show in the display.
2. Once the specied time has elapsed an alarm will
sound.
3. To stop the alarm press any button.
Fig.2.29
Fig.2.30
Fig.2.31
Fig.2.32
Fig.2.33
Fig.2.34
Loading ...
Loading ...
Loading ...