Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas before servicing. Check appliance is safe when you have nished.
28
Conversion from Natural Gas (1.0 kPa)
to LPG X Propane (2.54 kPa)
This conversion must be performed by a competent
person, in accordance with these instructions and
with the local supply company requirements. Read
the instructions before converting this appliance.
Failure to convert the appliance correctly could
invalidate any warranty or liability claims and lead
to prosecution.
The conversion instructions must be used in
conjunction with the rest of the appliance
instruction, in particular for information on
Standards, cooker positioning, connection, hose
suitability, etc.
When servicing or replacing gas-carrying
components, disconnect from the gas before
starting, and check that the appliance is gas sound
after completion.
DO NOT use reconditioned or unauthorised gas
controls.
Disconnect from the electricity supply before
conversion. Before electrical reconnection, check
that the appliance is electrically safe.
Hotplate
Injectors
Remove the burner caps and heads. Remove the old jets
(Fig.8-1). Fit the new jets (see the ‘Technical Data’ section at the
back of this book for the correct jets). Reassemble in reverse
order.
Tap Adjustment
Using a pair of long nosed pliers, carefully remove the bypass
screw and t the correct replacement screw (Fig.8-2); see the
‘Technical Data’ for the correct size. Tighten the screw down.
Ret the control panel.
Grill
Injector
Lift up the spring retaining the grill holder and slide the jet
holder out of the burner venturi (Fig.8-3). Remove the grill
jet from the adaptor and fit a new jet; see the ‘Technical Data’
for the correct jets. Refit the jet holder back into the burner
venturi.
Tap Adjustment
Remove the tap bypass screw and fit the new one; see the
‘Technical Data’ for the correct screws.
8. Conversion to Propane Gas
A
B
C
ArtNo.311-0010 Injectors
Fig.8-1
A – Injector, B – Internal injector, C – External injector
ArtNo.102-0015 - Soudillon tap bypass screw
A
Fig.8-2
A – Tap bypass screw
ArtNo.333-0005 - 90 Bray gas
grill injector - change jet
Fig.8-3
DocNo.080-0004 - Gas conversion - 90RM - Tag-t fascia EVENS
Loading ...
Loading ...
Loading ...