Loading ...
Loading ...
Loading ...
9
Charcoal Filter Bracket Installation
1. Align charcoal lter bracket
■ Remove the charcoal lter bracket from the box and place
it at the desired height above the hood canopy bottom (use
provided template for reference).
■ Ensure the center of the bracket is aligned with the center
line marked to conrm the center of the hood aligns with the
center of the lter bracket.
5/16" (8 mm)
2
2. Drill pilot holes
■ Mark holes as per center line and drill 2-5/16" (8 mm) holes.
Tip: Use a level tool to ensure the bracket is level before
drilling the holes.
3. Install anchors
■ Install 2 anchors and screw the bracket into place.
■ Do not fully tighten the screws as the bracket will need to be
removed in the next step.
4. Mark center hole
■ Mark the center hole with a pencil.
Loading ...
Loading ...
Loading ...