Loading ...
Loading ...
Loading ...
6
Cabinet Dimensions
*For non-vented (recirculating) installations
IMPORTANT:
Minimum distance “X”: 24" (61.0 cm) from electric
cookingsurface.
Minimum distance “X”: 30" (76.2 cm) from gas
cookingsurface.
Suggested maximum distance “X”: 36" (91.4 cm)
NOTE: For best performance of the Auto Sense feature, the
range hood should be installed at 24" (61.0 cm) from an electric
cooking surface and 30" (76.2 cm) from a gas cooking surface.
The chimneys can be adjusted for different ceiling heights.
Seethe following chart.
*NOTE: The range hood chimneys are adjustable and designed
to meet varying ceiling or soft heights depending on the
distance “X” between the bottom of the range hood and the
cooking surface.
Centerline
Side
cabinet
Side
cabinet
30" (76.2 cm)
or
36" (91.4 cm)
“X”
bottom of
canopy
to cooking
surface
Cooking surface
11 / " (30.0 cm)
13
16
11
/ " (30.0 cm) max.
13
16
19 / " (50.0 cm)
11
16
Product Dimensions
G
F
E
D
C
B
A
Installation
Min. ceiling height Max. ceiling height
Electric cooking
surface
8' 2
5
/
8
" (2.50 m) 10' 4" (3.24 m)
Gas cooking
surface
8' 6
5
/
8
" (2.61 m) 10' 4" (3.24 m)
A. 12
5
/
8
" (32.1 cm)
B. 12
13
/
16
" (32.5 cm)
C. For 30" (76.2 cm) models,
29
15
/
16
" (76.0 cm)
For 36" (91.4 cm) models,
35
15
/
16
" (91.3 cm)
D. For 30" (76.2 cm) models,
17
15
/
16
" (45.6 cm)
For 36" (91.4 cm) models,
17
15
/
16
" (45.6 cm)
E. 2
3
/
8
" (6.0 cm)
F. 24" (61.0 cm)
G. 38
5
/
8
" (98.1 cm) min.
49
1
/
8
" (124.8 cm) max.
H. 11
5
/
8
" (29.5 cm)
I. 12" (30.5 cm)
J. 12
3
/
8
" (31.4 cm)
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
Have a qualied technician to install the range hood. It is the
installer’s responsibility to comply with installation clearances
specied on the model/serial/rating plate. The model/serial/
rating plate is located behind the left lter on the rear wall of
thevent hood.
Canopy hood location should be away from strong draft
areas,such as windows, doors and strong heating vents.
Cabinet opening dimensions that are shown must be used.
Given dimensions provide minimum clearance.
The canopy hood mounting location must be capable
ofsupporting 100 lbs (45.4 kg).
This range hood is recommended for use with cooktops
withamaximum total rating of 68,000 BTUs or less.
Grounded electrical outlet is required. See the “Electrical
Requirements” section.
All openings in ceiling and wall where canopy hood will be
installed must be sealed.
For Mobile Home Installations:
The installation of this range hood must conform to the
Manufactured Home Construction Safety Standards, Title 24
CFR, Part 328 (formerly the Federal Standard for Mobile Home
Construction and Safety, Title 24, HUD, Part 280) or when such
standard is not applicable, the standard for Manufactured Home
Installation 1982 (Manufactured Home Sites, Communities
and Setups) ANSI A225.1/NFPA 501A, or latest edition, or
withlocalcodes.
J
I
H
Loading ...
Loading ...
Loading ...