Loading ...
Loading ...
Loading ...
16
RANGE HOOD CARE
Cleaning
Exterior Surfaces:
To avoid damage to the exterior surface, do not use steel wool
or soap-lled scouring pads.
Always wipe dry to avoid water marks.
Cleaning Method:
■ Liquid detergent soap and water, or all-purpose cleanser:
Wipe with damp soft cloth or nonabrasive sponge, then rinse
with clean water and wipe dry.
Grease Filters
IMPORTANT: Clean the hood and grease lters frequently
according to the following instructions. Replace grease lters
before operating hood.
Clean once a month (or when the lter saturation indication
system indicates it necessary) using non aggressive detergents,
either by hand or in the dishwasher, which must be set to a low
temperature and a short cycle.
When washed in a dishwasher, the grease lter may discolor
slightly, but this does not affect its ltering capacity.
To remove the grease lter, pull the spring release handle.
Charcoal Filter
It absorbs unpleasant odors caused by cooking.
The efciency of the charcoal lter degrades slowly due to
prolonged use, depending on the type of cooking, and the
regularity of cleaning the grease lter.
Replace the cartridge at least every ve years.
It cannot be washed.
For maximum performance, the lter is larger than standard
lters and needs to be installed on a support above the hood.
Installation:
Place the charcoal lter into the charcoal lter mounting bracket.
Install the charcoal lter clamps in the locations shown.
NOTE: The opening of the charcoal lter should be placed facing
down towards the hood.
NOTE: When used in recirculation mode, To Reduce the Risk of
Fire and Shock use only conversion kit Model W11197817.
Replacing LED Lights
The hood is equipped with a lighting system based on LED
technology.
To purchase spare LEDs, see the "Assistance or Service"
section.
NOTE: Lights can be replaced by service technician only.
Loading ...
Loading ...
Loading ...