Loading ...
Loading ...
Loading ...
41
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Adjusting the Constant Face Display Size
● When Auto is on, press the [ ][ ]
buttons to choose the desired option.
● The camera zooms automatically to keep
faces at the specied size.
Auto
Auto zoom to prevent subjects from moving off the
screen.
When multiple faces are detected, the camera zooms
to keep these subjects on the screen.
Face
Keep faces large enough to show facial expressions
clearly.
Upper Body
Keep faces small enough to show the person’s upper
body.
Whole Body
Keep faces small enough to show the person’s entire
body.
Manual
Keep faces at the size specied by moving the zoom
lever. Release the zoom lever once the desired size
has been obtained.
● The face size can also be adjusted in MENU (
=
29) > [ ]
tab > [
Auto Settings] > [ Auto Zoom]. You can choose [Off]
to deactivate this feature and use only the feature described in
“Easily Reacquiring Subjects with Auto Zooming (Seek Assist)”
(
=
42).
● You can zoom in or out with the zoom lever when [Face], [Upper
Body], or [Whole Body] is selected, but the original zoom factor
will be restored in a few seconds after you release the lever.
● You can clear your specied face size during movie recording by
pressing the [
] button.
● Face sizes cannot be changed during movie recording.
2
Shoot.
● Auto zooming continues even after you
shoot, and the frames are still displayed.
● To cancel auto zooming, press the [
]
button again. [ Auto: Off] is displayed.
● A face may not be displayed at a constant size relative to the
screen at some zoom factors, or if the person’s head is tilted or
facing the camera indirectly.
● During movie recording, a changed zoom factor and camera
operating sounds are recorded.
● When
Auto is on, some shooting information is not displayed,
and some shooting settings cannot be congured.
● Auto zooming to keep multiple subjects on the screen is not
performed during movie recording, even if faces are detected.
● Auto zooming is not performed during continuous shooting.
● If multiple faces are detected in step 1, you can switch the main
face used for auto zooming by pressing the [
] button.
● When a detected subject moves toward the edge of the screen,
the camera zooms out to keep the subject on the screen.
● The zoom factor cannot be changed after you press the shutter
button all the way down in self-timer mode (
=
43).
● The camera prioritizes zooming to keep subjects on the screen.
For this reason, it may not be possible to maintain a constant
face display size, depending on subject movement and shooting
conditions.
● When no face is detected, the camera zooms to a certain level
and stops zooming until a face is detected.
Loading ...
Loading ...
Loading ...